RMC1/10K71R5FTP Equivalent & Substitute Parts

Part Overview

The RMC1/10K71R5FTP is a 71.5 Ohm ±1% 1/8W thick film chip resistor manufactured by Kamaya Inc. in 0805 (2012 Metric) package format. This component is classified as Active product status with 964 pieces currently in stock. The RMC series represents a standard general-purpose resistor suitable for broad industrial and commercial applications. Substitute parts are identified when equivalent electrical specifications, mechanical dimensions, and packaging formats are required due to supply constraints, design standardization, or application-specific certifications.

Substiute Parts

RMC1/10K71R5FTP

Kamaya Inc.In Stock: 975RMC1/10K71R5FTP Datasheet

Current PartRFQ

ERJ-6ENF71R5V

Panasonic Electronic ComponentsIn Stock: 51007ERJ-6ENF71R5V Datasheet

DirectRFQ

KTR10EZPF71R5

Rohm SemiconductorIn Stock: 10426KTR10EZPF71R5 Datasheet

DirectRFQ

MCR10ERTF71R5

Rohm SemiconductorIn Stock: 4784MCR10ERTF71R5 Datasheet

DirectRFQ

RC0805FR-0771R5L

YAGEOIn Stock: 32366RC0805FR-0771R5L Datasheet

DirectRFQ

RMCF0805FT71R5

Stackpole Electronics IncIn Stock: 2202RMCF0805FT71R5 Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the RMC1/10K71R5FTP are qualified based on the following criteria:

Electrical Parameters (Mandatory Match):

• Resistance value: 71.5 Ohms
• Tolerance: ±1%
• Power rating: 0.125W (1/8W)
• Temperature coefficient: ±100ppm/°C
• Operating temperature range: -55°C ~ 155°C

Mechanical Parameters (Mandatory Match):

• Package type: 0805 (2012 Metric)
• Physical dimensions: 0.079" L x 0.049" W (2.00mm x 1.25mm)
• Number of terminations: 2

Composition:

• Thick film construction

All identified substitute parts meet these core electrical and mechanical requirements. Additional features such as automotive AEC-Q200 certification or moisture-resistant construction represent enhanced specifications beyond the base requirements and do not disqualify parts from substitution eligibility.

Parameter Comparison

Engineering Selection Recommendations

Active Status Parts (Preferred for New Designs):

• ERJ-6ENF71R5V (Panasonic): Active status with AEC-Q200 automotive qualification. Tape & Reel packaging. 50,939 units in stock.
• KTR10EZPF71R5 (Rohm Semiconductor): Active status with AEC-Q200 automotive qualification and high voltage features. Tape & Reel packaging. 10,337 units in stock.
• RC0805FR-0771R5L (YAGEO): Active status with moisture-resistant construction. Cut Tape & Digi-Reel packaging. 32,290 units in stock.
• RMCF0805FT71R5 (Stackpole Electronics Inc): Active status with AEC-Q200 automotive qualification. Tape & Reel packaging. 2,156 units in stock.

Discontinued Status Part (Limited Availability):

• MCR10ERTF71R5 (Rohm Semiconductor): Discontinued at DiGi Electronics. Cut Tape & Digi-Reel packaging. 4,750 units in stock. Not recommended for new designs.

All active substitute parts carry ROHS3 compliance and REACH Unaffected status, matching the regulatory profile of the main part. Selection between active alternatives depends on packaging preference (Tape & Reel versus Cut Tape & Digi-Reel) and application-specific requirements such as automotive certification.

Frequently Asked Questions (FAQ)

Q: Can ERJ-6ENF71R5V replace RMC1/10K71R5FTP directly?

A: Yes. Both parts share identical electrical specifications (71.5 Ohms ±1%, 0.125W, ±100ppm/°C, -55°C to 155°C) and mechanical dimensions (0805 package, 2.00mm x 1.25mm). The ERJ-6ENF71R5V includes AEC-Q200 automotive certification as an additional feature. Height difference is 0.70mm (ERJ-6ENF71R5V) versus 0.65mm (RMC1/10K71R5FTP), which remains within standard PCB assembly tolerances.

Q: What is the difference between Tape & Reel and Cut Tape & Digi-Reel packaging?

A: Tape & Reel packaging is supplied on continuous carrier tape suitable for automated pick-and-place assembly. Cut Tape & Digi-Reel packaging is supplied in shorter tape segments or on Digi-Reel format, typically for lower-volume applications or manual assembly. Both formats contain identical components; packaging choice depends on production volume and assembly equipment compatibility.

Q: Is MCR10ERTF71R5 suitable for new product designs?

A: No. MCR10ERTF71R5 is discontinued at DiGi Electronics, indicating limited future availability. For new designs, select from active status alternatives: ERJ-6ENF71R5V, KTR10EZPF71R5, RC0805FR-0771R5L, or RMCF0805FT71R5.

Q: Do all substitute parts meet the same regulatory requirements?

A: Yes. All substitute parts listed carry ROHS3 compliance and REACH Unaffected status, matching the regulatory profile of RMC1/10K71R5FTP. ECCN and HTSUS classifications are identical across all parts.

Q: What does AEC-Q200 certification indicate?

A: AEC-Q200 is an automotive qualification standard. Parts carrying this certification (ERJ-6ENF71R5V, KTR10EZPF71R5, RMCF0805FT71R5) have undergone additional reliability testing for automotive applications. This certification is optional for general-purpose applications but required for automotive designs.

Q: Can I use RC0805FR-0771R5L in place of RMC1/10K71R5FTP?

A: Yes. RC0805FR-0771R5L meets all electrical and mechanical requirements. It includes moisture-resistant construction as an additional feature and is supplied in Cut Tape & Digi-Reel format rather than Tape & Reel. Height is 0.60mm, which is lower than the main part's 0.65mm but remains within assembly tolerances.