Equivalent & Substitute Parts for RMC1/10K6803FTP

Part Overview

The RMC1/10K6803FTP is a 680 kOhms ±1% 0.125W (1/8W) chip resistor manufactured by Kamaya Inc. in the 0805 (2012 Metric) package. This thick film resistor operates across the temperature range of -55°C to 155°C with a temperature coefficient of ±100ppm/°C. The part is currently active in production with 869 pieces in stock.

Substitute parts are necessary when the primary manufacturer part becomes unavailable, when alternative sourcing is required for supply chain optimization, or when specific application requirements such as automotive qualification or enhanced moisture resistance are needed.

Substiute Parts

RMC1/10K6803FTP

Kamaya Inc.In Stock: 926RMC1/10K6803FTP Datasheet

Current PartRFQ

CRG0805F680K

TE Connectivity Passive ProductIn Stock: 749CRG0805F680K Datasheet

DirectRFQ

ERJ-6ENF6803V

Panasonic Electronic ComponentsIn Stock: 224340ERJ-6ENF6803V Datasheet

DirectRFQ

KTR10EZPF6803

Rohm SemiconductorIn Stock: 5789KTR10EZPF6803 Datasheet

DirectRFQ

MCR10ERTF6803

Rohm SemiconductorIn Stock: 1086MCR10ERTF6803 Datasheet

DirectRFQ

RC0805FR-07680KL

YAGEOIn Stock: 64281RC0805FR-07680KL Datasheet

DirectRFQ

RMCF0805FT680K

Stackpole Electronics IncIn Stock: 45457RMCF0805FT680K Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the RMC1/10K6803FTP is determined by strict equivalence across the following parameters:

Critical Matching Parameters:

• Resistance value: 680 kOhms
• Tolerance: ±1%
• Power rating: 0.125W (1/8W)
• Package: 0805 (2012 Metric)
• Composition: Thick Film
• Temperature coefficient: ±100ppm/°C
• Operating temperature range: -55°C ~ 155°C
• Moisture sensitivity level: 1 (Unlimited)
• Number of terminations: 2

All substitute parts listed below meet these exact specifications. Variations in secondary features such as automotive qualification (AEC-Q200), moisture resistance enhancements, or packaging format (Tape & Reel versus Cut Tape) do not affect functional interchangeability but may influence selection based on application requirements and supply availability.

Parameter Comparison

Engineering Selection Recommendations

Primary Substitutes (Active Status, Highest Availability):

RMCF0805FT680K (Stackpole Electronics Inc) is the preferred substitute with 45,353 pieces in stock and active product status. This part carries AEC-Q200 automotive qualification and RoHS3 compliance, making it suitable for both general and automotive applications.

RC0805FR-07680KL (YAGEO) offers the highest inventory availability at 64,225 pieces with active status. This part features moisture-resistant thick film construction and RoHS3 compliance, providing enhanced environmental protection.

CRG0805F680K (TE Connectivity) is available with 700 pieces in stock and active status, offering RoHS3 compliance and the Neohm series designation.

Secondary Substitutes (Active Status, Specialized Features):

ERJ-6ENF6803V (Panasonic Electronic Components) provides the largest inventory at 224,306 pieces with AEC-Q200 automotive qualification and RoHS3 compliance. This part is suitable for automotive applications requiring established qualification standards.

KTR10EZPF6803 (Rohm Semiconductor) offers 5,731 pieces in stock with both AEC-Q200 automotive qualification and high voltage features. This part is suitable for applications requiring automotive-grade components with enhanced voltage performance.

Avoid:

MCR10ERTF6803 (Rohm Semiconductor) is discontinued at DiGi Electronics and should not be selected for new designs despite 980 pieces remaining in stock.

Frequently Asked Questions (FAQ)

Q: Can I substitute RMC1/10K6803FTP with any of the listed parts without circuit redesign?

A: Yes. All listed substitute parts match the critical electrical and mechanical parameters: 680 kOhms resistance, ±1% tolerance, 0.125W power rating, 0805 package, thick film composition, ±100ppm/°C temperature coefficient, -55°C to 155°C operating range, and MSL 1 rating. Direct substitution is electrically and mechanically compatible.

Q: What is the difference between Tape & Reel and Cut Tape & Digi-Reel packaging?

A: Tape & Reel packaging is supplied on continuous carrier tape suitable for automated pick-and-place assembly. Cut Tape & Digi-Reel packaging is supplied in shorter tape segments on reels for manual or smaller-scale assembly operations. Both formats contain identical components; the difference is in handling and assembly process compatibility.

Q: Why do some substitutes have AEC-Q200 qualification while others do not?

A: AEC-Q200 is an automotive industry qualification standard. Parts with this rating have undergone additional testing and validation for automotive applications. Parts without this designation are suitable for general industrial and consumer applications. Selection depends on application requirements.

Q: Are all substitute parts RoHS3 compliant?

A: All listed substitute parts are RoHS3 compliant. The main part RMC1/10K6803FTP does not specify RoHS status in the provided data.

Q: Which substitute has the best inventory availability?

A: RC0805FR-07680KL (YAGEO) has the highest inventory at 64,225 pieces. ERJ-6ENF6803V (Panasonic) has 224,306 pieces available, providing the largest supply option.

Q: Can I use MCR10ERTF6803 for new designs?

A: No. MCR10ERTF6803 is discontinued at DiGi Electronics and should not be selected for new designs. Use active alternatives such as RMCF0805FT680K, RC0805FR-07680KL, or ERJ-6ENF6803V instead.

Q: What does MSL 1 (Unlimited) mean?

A: MSL 1 indicates Moisture Sensitivity Level 1, which means unlimited shelf life without special moisture control storage requirements. All listed parts have this rating, ensuring standard storage conditions are acceptable.