RMC1/10K6342FTP Equivalent & Substitute Parts

Part Overview

The RMC1/10K6342FTP is a 63.4 kOhms ±1% thick film chip resistor manufactured by Kamaya Inc. in the 0805 (2012 Metric) package format with 0.125W power rating. This component is classified as Active product status with unlimited moisture sensitivity level (MSL 1). The part is supplied in Tape & Reel packaging and is REACH Unaffected with EAR99 ECCN classification.

Equivalent and substitute parts are necessary when the primary part experiences supply constraints, inventory limitations, or when design requirements mandate specific manufacturer certifications such as automotive AEC-Q200 qualification or enhanced moisture resistance features.

Substiute Parts

RMC1/10K6342FTP

Kamaya Inc.In Stock: 767RMC1/10K6342FTP Datasheet

Current PartRFQ

ERJ-6ENF6342V

Panasonic Electronic ComponentsIn Stock: 57409ERJ-6ENF6342V Datasheet

DirectRFQ

KTR10EZPF6342

Rohm SemiconductorIn Stock: 8032KTR10EZPF6342 Datasheet

DirectRFQ

RC0805FR-0763K4L

YAGEOIn Stock: 34271RC0805FR-0763K4L Datasheet

DirectRFQ

RC2012F6342CS

Samsung Electro-MechanicsIn Stock: 843RC2012F6342CS Datasheet

DirectRFQ

RMCF0805FT63K4

Stackpole Electronics IncIn Stock: 20543RMCF0805FT63K4 Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the RMC1/10K6342FTP is determined by strict compliance with the following core electrical and mechanical parameters:

Mandatory Matching Parameters:

• Resistance value: 63.4 kOhms
• Tolerance: ±1%
• Power rating: 0.125W (1/8W)
• Package: 0805 (2012 Metric)
• Composition: Thick Film
• Temperature coefficient: ±100ppm/°C
• Operating temperature range: -55°C ~ 155°C
• Number of terminations: 2
• Moisture sensitivity level: 1 (Unlimited)

All identified substitute parts meet these mandatory parameters. Substitute parts are grouped by additional features and certifications beyond the core specifications: Automotive AEC-Q200 qualification and moisture-resistant construction. These features represent enhancements to the base specification and do not restrict substitution compatibility.

Parameter Comparison

Engineering Selection Recommendations

All substitute parts listed are electrically and mechanically equivalent to the RMC1/10K6342FTP based on core specifications. Selection among substitutes is determined by application-specific requirements and compliance certifications:

For Automotive Applications: ERJ-6ENF6342V (Panasonic), KTR10EZPF6342 (Rohm), and RMCF0805FT63K4 (Stackpole) carry AEC-Q200 automotive qualification. These parts are suitable for automotive-grade circuit designs requiring formal qualification documentation.

For Moisture-Critical Environments: RC0805FR-0763K4L (YAGEO) and RC2012F6342CS (Samsung) feature moisture-resistant construction. These parts are suitable for applications with elevated humidity exposure or moisture ingress risk.

For General Industrial Applications: All substitute parts are suitable. Selection may be based on inventory availability, packaging preference (Tape & Reel versus Cut Tape), or existing supply chain relationships.

RoHS Compliance: All substitute parts are ROHS3 Compliant. The primary part RMC1/10K6342FTP does not specify RoHS status; if RoHS compliance is a design requirement, substitute parts provide documented compliance.

Packaging Consideration: RC2012F6342CS is supplied in Cut Tape (CT) format, while all other parts including the primary part are supplied in Tape & Reel (TR) format. Cut Tape packaging may require different handling and assembly procedures.

Frequently Asked Questions (FAQ)

Q: Can ERJ-6ENF6342V replace RMC1/10K6342FTP in non-automotive applications?

A: Yes. ERJ-6ENF6342V meets all core electrical and mechanical parameters. AEC-Q200 certification is an additional qualification that does not restrict use in non-automotive applications.

Q: What is the difference between Tape & Reel and Cut Tape packaging?

A: Tape & Reel (TR) packaging supplies components on continuous carrier tape suitable for automated pick-and-place assembly. Cut Tape (CT) packaging supplies components on cut segments of carrier tape, typically for lower-volume or manual assembly processes. RC2012F6342CS uses Cut Tape format; all other parts use Tape & Reel format.

Q: Are moisture-resistant variants required for standard PCB applications?

A: Moisture-resistant construction is not required for standard PCB applications. RC0805FR-0763K4L and RC2012F6342CS provide enhanced moisture resistance as an optional feature. All parts, including the primary RMC1/10K6342FTP, carry MSL 1 (Unlimited) rating, indicating no moisture sensitivity restrictions.

Q: Can I use KTR10EZPF6342 in place of RMC1/10K6342FTP if my design does not require high voltage capability?

A: Yes. High voltage capability is an additional feature of KTR10EZPF6342 that does not restrict substitution. The part meets all mandatory electrical and mechanical parameters for direct replacement.

Q: What does ROHS3 Compliant mean?

A: ROHS3 Compliant indicates the part meets Restriction of Hazardous Substances Directive 3 requirements, restricting specified hazardous materials in electrical and electronic equipment. All substitute parts carry this certification; the primary part does not specify RoHS status.

Q: Are all substitute parts available in the same quantity?

A: No. Inventory levels vary by manufacturer and supplier. ERJ-6ENF6342V (Panasonic) shows 57,352 pieces in stock, while RC2012F6342CS (Samsung) shows 811 pieces. Inventory availability should be verified with the component supplier for production requirements.

Q: Can I mix different substitute parts within the same circuit board assembly?

A: Yes. All substitute parts are electrically and mechanically equivalent. Mixing different manufacturers on the same board is permissible from a functional standpoint. However, design documentation and bill of materials should clearly specify part selection to maintain traceability and support future maintenance or rework operations.