Equivalent & Substitute Parts for RMC1/10K5233FTP

Part Overview

The RMC1/10K5233FTP is a 523 kOhms ±1% 0.125W thick film chip resistor manufactured by Kamaya Inc. in 0805 (2012 Metric) package format. This component is currently active in production and available in Tape & Reel packaging. Substitute parts are necessary to address supply chain flexibility, alternative sourcing options, and specific application requirements such as automotive qualification or enhanced moisture resistance.

Substiute Parts

RMC1/10K5233FTP

Kamaya Inc.In Stock: 1077RMC1/10K5233FTP Datasheet

Current PartRFQ

ERJ-6ENF5233V

Panasonic Electronic ComponentsIn Stock: 21908ERJ-6ENF5233V Datasheet

DirectRFQ

MCR10ERTF5233

Rohm SemiconductorIn Stock: 2306MCR10ERTF5233 Datasheet

DirectRFQ

RC0805FR-07523KL

YAGEOIn Stock: 50973RC0805FR-07523KL Datasheet

DirectRFQ

RMCF0805FT523K

Stackpole Electronics IncIn Stock: 16875RMCF0805FT523K Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the RMC1/10K5233FTP is determined by strict equivalence across the following parameters:

Critical Matching Parameters:

• Resistance value: 523 kOhms
• Tolerance: ±1%
• Power rating: 0.125W (1/8W)
• Package: 0805 (2012 Metric)
• Composition: Thick Film
• Temperature coefficient: ±100ppm/°C
• Operating temperature range: -55°C ~ 155°C
• Moisture sensitivity level: 1 (Unlimited)
• Number of terminations: 2

All substitute parts listed meet these electrical and mechanical specifications. Variations in product status, certifications (such as AEC-Q200 automotive qualification), and packaging format (Tape & Reel versus Cut Tape) do not affect functional interchangeability but may influence selection based on application requirements and supply availability.

Parameter Comparison

Engineering Selection Recommendations

Active Status Parts (Preferred for New Designs):

• ERJ-6ENF5233V (Panasonic): Active product with AEC-Q200 automotive qualification. Suitable for automotive and industrial applications requiring enhanced reliability standards.
• RC0805FR-07523KL (YAGEO): Active product with moisture-resistant thick film composition. Lowest seated height (0.60mm) among available options.
• RMCF0805FT523K (Stackpole Electronics Inc): Active product with AEC-Q200 automotive qualification. Matches original part height specification (0.65mm).

Discontinued Status:

• MCR10ERTF5233 (Rohm Semiconductor): Discontinued at DiGi Electronics. Existing inventory available (2273 Pcs) but not recommended for new designs due to supply discontinuation.

Original Part:

• RMC1/10K5233FTP (Kamaya Inc.): Active product with established supply (1045 Pcs in stock).

Selection should prioritize active status parts. For automotive applications, ERJ-6ENF5233V or RMCF0805FT523K are appropriate. For applications with space constraints, RC0805FR-07523KL offers the lowest profile.

Frequently Asked Questions (FAQ)

Q: Can ERJ-6ENF5233V replace RMC1/10K5233FTP directly? A: Yes. Both parts meet identical electrical specifications (523 kOhms ±1%, 0.125W, ±100ppm/°C, -55°C ~ 155°C operating range) and share the same 0805 package footprint. The height difference (0.70mm vs 0.65mm) is within typical PCB assembly tolerances for 0805 components.

Q: What is the difference between automotive-qualified and standard versions? A: ERJ-6ENF5233V and RMCF0805FT523K carry AEC-Q200 automotive qualification, indicating compliance with automotive reliability and environmental stress testing standards. The RMC1/10K5233FTP and RC0805FR-07523KL do not list this certification. Selection depends on application requirements.

Q: Why is MCR10ERTF5233 marked as discontinued? A: MCR10ERTF5233 is discontinued at DiGi Electronics, indicating reduced long-term availability. While current inventory exists, this part should not be selected for new designs requiring sustained supply.

Q: Does packaging format (Tape & Reel vs Cut Tape) affect electrical performance? A: No. Packaging format affects handling, storage, and assembly logistics only. All listed parts are electrically and mechanically equivalent regardless of packaging type.

Q: Are all substitute parts RoHS3 compliant? A: MCR10ERTF5233, RC0805FR-07523KL, and RMCF0805FT523K are confirmed RoHS3 compliant. RMC1/10K5233FTP and ERJ-6ENF5233V do not list RoHS status in provided specifications.

Q: What is Moisture Sensitivity Level (MSL) 1? A: MSL 1 indicates unlimited shelf life without moisture baking requirements. All listed parts share this classification, ensuring equivalent moisture handling during storage and assembly.