RMC1/10K5232FTP Equivalent & Substitute Parts

Part Overview

The RMC1/10K5232FTP is a 52.3 kOhms ±1% thick film chip resistor manufactured by Kamaya Inc. in 0805 (2012 Metric) package format with 0.125W power rating. This component is classified as Active product status with 887 pieces currently in stock. Substitute parts are necessary to address supply chain continuity, alternative sourcing options, and specific application requirements such as automotive qualification or enhanced moisture resistance.

Substiute Parts

RMC1/10K5232FTP

Kamaya Inc.In Stock: 968RMC1/10K5232FTP Datasheet

Current PartRFQ

ERJ-6ENF5232V

Panasonic Electronic ComponentsIn Stock: 59929ERJ-6ENF5232V Datasheet

DirectRFQ

MCR10ERTF5232

Rohm SemiconductorIn Stock: 1695MCR10ERTF5232 Datasheet

DirectRFQ

RC0805FR-0752K3L

YAGEOIn Stock: 34658RC0805FR-0752K3L Datasheet

DirectRFQ

RMCF0805FT52K3

Stackpole Electronics IncIn Stock: 22080RMCF0805FT52K3 Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the RMC1/10K5232FTP is determined by strict equivalence across the following parameters:

Critical Matching Parameters:

• Resistance value: 52.3 kOhms
• Tolerance: ±1%
• Power rating: 0.125W (1/8W)
• Package: 0805 (2012 Metric)
• Composition: Thick Film
• Temperature coefficient: ±100ppm/°C
• Operating temperature range: -55°C ~ 155°C
• Moisture sensitivity level: 1 (Unlimited)

All four substitute parts listed meet these critical parameters. Variations exist only in manufacturer identity, product status, packaging format (Tape & Reel vs. Cut Tape), and optional certifications (AEC-Q200 automotive qualification, moisture resistance features). These variations do not affect electrical or mechanical compatibility.

Parameter Comparison

Engineering Selection Recommendations

For General Industrial Applications: RC0805FR-0752K3L (YAGEO) is the primary substitute. This part maintains Active product status, offers ROHS3 compliance, includes moisture-resistant features, and provides the lowest seated height (0.024" / 0.60mm) for space-constrained PCB layouts. Inventory availability is 34,606 pieces.

For Automotive Applications: Both ERJ-6ENF5232V (Panasonic) and RMCF0805FT52K3 (Stackpole) carry AEC-Q200 automotive qualification. ERJ-6ENF5232V offers higher inventory (59,822 pieces) and Active status. RMCF0805FT52K3 provides equivalent automotive qualification with 22,046 pieces in stock and Active status. Both are suitable for automotive-grade circuit designs.

For Supply Chain Continuity: MCR10ERTF5232 (Rohm Semiconductor) is listed as Discontinued at DiGi Electronics and should not be selected for new designs requiring long-term availability. However, 1,632 pieces remain in current inventory if immediate sourcing is required for legacy applications.

Packaging Consideration: RMC1/10K5232FTP, ERJ-6ENF5232V, RC0805FR-0752K3L, and RMCF0805FT52K3 are supplied in Tape & Reel (TR) format. MCR10ERTF5232 is supplied in Cut Tape (CT) & Digi-Reel® format. Select based on assembly equipment compatibility and production volume requirements.

Frequently Asked Questions (FAQ)

Q: Can ERJ-6ENF5232V replace RMC1/10K5232FTP in any circuit?

A: Yes. ERJ-6ENF5232V meets all critical electrical and mechanical parameters: 52.3 kOhms ±1%, 0.125W power rating, 0805 package, ±100ppm/°C temperature coefficient, and -55°C ~ 155°C operating range. The seated height difference (0.028" vs. 0.026") is within typical PCB design tolerances. AEC-Q200 automotive qualification is an additional feature that does not prevent use in non-automotive applications.

Q: What is the difference between RC0805FR-0752K3L and RMCF0805FT52K3?

A: Both parts are electrically and mechanically equivalent. RC0805FR-0752K3L (YAGEO) features moisture-resistant construction and offers the lowest seated height (0.024"). RMCF0805FT52K3 (Stackpole) carries AEC-Q200 automotive qualification. Selection depends on application requirements: choose YAGEO for moisture-sensitive environments or space-constrained designs; choose Stackpole for automotive applications.

Q: Why is MCR10ERTF5232 marked as discontinued?

A: MCR10ERTF5232 is discontinued at DiGi Electronics, indicating reduced distributor support and potential future supply constraints. While 1,632 pieces remain in current inventory, this part should not be selected for new product designs. Use only for legacy system repairs or short-term production runs where existing stock is available.

Q: Are all substitute parts ROHS3 compliant?

A: ERJ-6ENF5232V, MCR10ERTF5232, RC0805FR-0752K3L, and RMCF0805FT52K3 are all ROHS3 compliant. RMC1/10K5232FTP RoHS status is not specified in the provided data. Confirm RoHS compliance with Kamaya Inc. if required for your application.

Q: What is the maximum seated height tolerance across all parts?

A: Seated heights range from 0.024" (0.60mm) to 0.028" (0.70mm). This 0.004" (0.10mm) variation is negligible for standard PCB assembly and does not affect component functionality or circuit performance.

Q: Can I use these parts interchangeably in production?

A: Yes, within the constraints of your supply chain and packaging requirements. All parts are electrically and mechanically equivalent. However, verify packaging format compatibility with your assembly equipment: Tape & Reel (TR) for automated high-volume production, or Cut Tape (CT) for lower volumes or manual assembly.