RMC1/10K36R0FTP Equivalent & Substitute Parts

Part Overview

The RMC1/10K36R0FTP is a 36 Ohm ±1% 1/8W thick film chip resistor manufactured by Kamaya Inc. in 0805 (2012 Metric) package format. This component is actively produced and widely used in general-purpose electronic applications requiring precision resistive elements with standard operating temperature range of -55°C to 155°C. Substitute parts are necessary to address supply chain continuity, inventory availability, or specific application requirements such as automotive qualification or enhanced moisture resistance.

Substiute Parts

RMC1/10K36R0FTP

Kamaya Inc.In Stock: 828RMC1/10K36R0FTP Datasheet

Current PartRFQ

ERJ-6ENF36R0V

Panasonic Electronic ComponentsIn Stock: 43040ERJ-6ENF36R0V Datasheet

DirectRFQ

MCR10ERTF36R0

Rohm SemiconductorIn Stock: 922MCR10ERTF36R0 Datasheet

DirectRFQ

RC0805FR-0736RL

YAGEOIn Stock: 25998RC0805FR-0736RL Datasheet

DirectRFQ

RMCF0805FT36R0

Stackpole Electronics IncIn Stock: 60151RMCF0805FT36R0 Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the RMC1/10K36R0FTP is determined by strict equivalence across the following critical parameters:

Mandatory Equivalence Criteria:

• Resistance value: 36 Ohms
• Tolerance: ±1%
• Power rating: 0.125W (1/8W)
• Package: 0805 (2012 Metric)
• Composition: Thick Film
• Temperature coefficient: ±100ppm/°C
• Operating temperature range: -55°C ~ 155°C
• Moisture sensitivity level: 1 (Unlimited)
• Number of terminations: 2

All substitute parts listed meet these mandatory criteria. Variations in product status, certifications (such as AEC-Q200 automotive qualification), and specific features (such as moisture resistance) do not disqualify substitution but indicate additional capabilities or application suitability.

Parameter Comparison

Engineering Selection Recommendations

Primary Selection (Active Status, Standard Application): RC0805FR-0736RL (YAGEO) is recommended for general-purpose applications. This part maintains active product status with moisture-resistant construction and established supply availability of 25,971 units.

Automotive Applications: ERJ-6ENF36R0V (Panasonic Electronic Components) or RMCF0805FT36R0 (Stackpole Electronics Inc) are suitable for automotive applications requiring AEC-Q200 qualification. Both parts are actively produced with substantial inventory levels (42,991 and 60,082 units respectively).

Supply Chain Continuity: MCR10ERTF36R0 (Rohm Semiconductor) is listed as discontinued at DiGi Electronics and should be avoided for new designs or long-term production requirements. Existing inventory of 831 units may be available through alternative distribution channels.

All substitute parts comply with ROHS3 and REACH requirements where applicable. Selection should be based on application requirements, supply chain strategy, and inventory availability rather than electrical performance, as all parts are electrically equivalent.

Frequently Asked Questions (FAQ)

Q: Can ERJ-6ENF36R0V replace RMC1/10K36R0FTP in non-automotive applications? A: Yes. ERJ-6ENF36R0V meets all mandatory electrical and mechanical parameters. The AEC-Q200 automotive qualification is an additional capability that does not restrict use in standard applications.

Q: What is the difference between RC0805FR-0736RL and other substitutes? A: RC0805FR-0736RL features moisture-resistant construction. All other electrical and mechanical parameters are equivalent. This feature provides enhanced reliability in humid environments but is not required for standard applications.

Q: Is MCR10ERTF36R0 suitable for new designs? A: MCR10ERTF36R0 is discontinued at DiGi Electronics. While electrically equivalent, this part should not be selected for new designs due to uncertain long-term availability.

Q: Do all substitute parts use the same 0805 package? A: Yes. All listed parts use 0805 (2012 Metric) package with identical footprint compatibility. Physical dimensions vary slightly (height range 0.024" to 0.028"), but these variations are within standard PCB assembly tolerances.

Q: Are there differences in temperature coefficient between parts? A: No. All parts, including the main part and substitutes, specify ±100ppm/°C temperature coefficient and -55°C to 155°C operating range.

Q: What does MSL 1 (Unlimited) mean for substitution? A: MSL 1 indicates unlimited shelf life without moisture bake requirements. All listed parts share this rating, ensuring equivalent moisture handling during storage and assembly.