RMC1/10K3603FTP Equivalent & Substitute Parts

Part Overview

The RMC1/10K3603FTP is a 360 kOhms ±1% 0.125W thick film chip resistor manufactured by Kamaya Inc. in 0805 (2012 Metric) package format. This component is classified as Active product status with full availability in Tape & Reel packaging. Substitute parts are necessary to address supply chain continuity, alternative sourcing options, and application-specific requirements such as automotive qualification or moisture resistance features.

Substiute Parts

RMC1/10K3603FTP

Kamaya Inc.In Stock: 1089RMC1/10K3603FTP Datasheet

Current PartRFQ

CRG0805F360K

TE Connectivity Passive ProductIn Stock: 998CRG0805F360K Datasheet

DirectRFQ

ERJ-6ENF3603V

Panasonic Electronic ComponentsIn Stock: 67756ERJ-6ENF3603V Datasheet

DirectRFQ

MCR10ERTF3603

Rohm SemiconductorIn Stock: 3045MCR10ERTF3603 Datasheet

DirectRFQ

RC0805FR-07360KL

YAGEOIn Stock: 241436RC0805FR-07360KL Datasheet

DirectRFQ

RMCF0805FT360K

Stackpole Electronics IncIn Stock: 28389RMCF0805FT360K Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the RMC1/10K3603FTP is determined by strict equivalence across the following parameters:

Critical Matching Parameters:

• Resistance value: 360 kOhms
• Tolerance: ±1%
• Power rating: 0.125W (1/8W)
• Package: 0805 (2012 Metric)
• Composition: Thick Film
• Temperature coefficient: ±100ppm/°C
• Operating temperature range: -55°C ~ 155°C
• Termination count: 2
• Moisture sensitivity level: 1 (Unlimited)

All substitute parts listed meet these core electrical and mechanical specifications. Variations in secondary attributes such as product status, RoHS compliance, REACH status, and optional features (automotive qualification, moisture resistance) do not affect functional substitutability but may influence selection based on application requirements and supply availability.

Parameter Comparison

Engineering Selection Recommendations

Active Status Parts (Preferred for New Designs):

• CRG0805F360K (TE Connectivity): Active status with standard thick film composition. Suitable for general-purpose applications.
• RC0805FR-07360KL (YAGEO): Active status with moisture-resistant feature. Recommended for applications requiring enhanced environmental protection.
• ERJ-6ENF3603V (Panasonic): Active status with Automotive AEC-Q200 qualification. Required for automotive applications meeting AEC-Q200 standards.
• RMCF0805FT360K (Stackpole Electronics): Active status with Automotive AEC-Q200 qualification. Alternative automotive-grade option.

Discontinued Status Parts (Limited Use):

• MCR10ERTF3603 (Rohm Semiconductor): Discontinued at DiGi Electronics. Use only when existing inventory is available and long-term supply is not required.

Compliance Considerations: All listed substitutes comply with RoHS3 and carry REACH Unaffected or Vendor Undefined status. Selection should align with end-product regulatory requirements and supply chain policies.

Frequently Asked Questions (FAQ)

Q: Can I substitute RMC1/10K3603FTP with any of the listed parts without circuit redesign?

A: Yes. All listed substitute parts match the critical electrical parameters (360 kOhms ±1%, 0.125W, ±100ppm/°C, -55°C ~ 155°C) and mechanical specifications (0805 package, 2 terminations). Direct substitution is electrically and mechanically compatible.

Q: What is the difference between standard and automotive-grade versions?

A: ERJ-6ENF3603V and RMCF0805FT360K carry Automotive AEC-Q200 qualification, indicating compliance with automotive reliability and testing standards. Standard versions (CRG0805F360K, RC0805FR-07360KL) do not carry this certification. Use automotive-grade parts only when AEC-Q200 compliance is specified.

Q: Why is MCR10ERTF3603 marked as discontinued?

A: MCR10ERTF3603 is discontinued at DiGi Electronics. While inventory may remain available through other channels, long-term supply cannot be guaranteed. Avoid for new designs unless existing stock is confirmed.

Q: Does package height variation affect substitutability?

A: Height variations (0.60mm to 0.70mm maximum seated height) fall within standard 0805 package tolerances and do not affect electrical performance or PCB assembly compatibility. All listed parts are mechanically interchangeable on standard 0805 footprints.

Q: What is the advantage of moisture-resistant composition in RC0805FR-07360KL?

A: The moisture-resistant feature in RC0805FR-07360KL provides enhanced stability in high-humidity environments. Select this variant for applications exposed to moisture or condensation conditions where standard thick film composition may experience performance drift.

Q: Are all substitute parts RoHS3 compliant?

A: Yes. All listed substitute parts carry RoHS3 Compliant status, meeting EU Directive 2011/65/EU requirements. The main part (RMC1/10K3603FTP) has REACH Unaffected status, indicating no conflict with REACH regulations.