RMC1/10K3302FTP Equivalent & Substitute Parts

Part Overview

The RMC1/10K3302FTP is a 33 kOhms ±1% 0.125W (1/8W) chip resistor manufactured by Kamaya Inc. in the 0805 (2012 Metric) package format. This thick film resistor operates across the temperature range of -55°C to 155°C with a temperature coefficient of ±100ppm/°C. The part is currently in active production status with 752 pieces available in stock. Equivalent and substitute parts are identified to support component procurement flexibility, supply chain continuity, and design requirements that may specify alternative manufacturers or additional certifications such as automotive AEC-Q200 qualification or moisture-resistant construction.

Substiute Parts

RMC1/10K3302FTP

Kamaya Inc.In Stock: 854RMC1/10K3302FTP Datasheet

Current PartRFQ

CRG0805F33K

TE Connectivity Passive ProductIn Stock: 40696CRG0805F33K Datasheet

DirectRFQ

ERJ-6ENF3302V

Panasonic Electronic ComponentsIn Stock: 157337ERJ-6ENF3302V Datasheet

DirectRFQ

KTR10EZPF3302

Rohm SemiconductorIn Stock: 4463KTR10EZPF3302 Datasheet

DirectRFQ

RC0805FR-0733KL

YAGEOIn Stock: 134605RC0805FR-0733KL Datasheet

DirectRFQ

RMCF0805FT33K0

Stackpole Electronics IncIn Stock: 77687RMCF0805FT33K0 Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the RMC1/10K3302FTP is determined by strict equivalence across the following electrical and mechanical parameters:

Core Substitution Criteria:

• Resistance value: 33 kOhms
• Tolerance: ±1%
• Power rating: 0.125W (1/8W)
• Package: 0805 (2012 Metric)
• Composition: Thick Film
• Temperature coefficient: ±100ppm/°C
• Operating temperature range: -55°C ~ 155°C
• Moisture sensitivity level: 1 (Unlimited)
• Number of terminations: 2

All identified substitute parts meet these core criteria. Additional features such as automotive AEC-Q200 certification or moisture-resistant construction represent enhanced specifications that do not prevent substitution but may be required by specific application standards or design specifications.

Parameter Comparison

Engineering Selection Recommendations

All substitute parts listed are functionally equivalent to the RMC1/10K3302FTP based on core electrical and mechanical specifications. Selection among these alternatives should be based on the following factors:

Compliance and Certification:

• For automotive applications requiring AEC-Q200 qualification, select ERJ-6ENF3302V (Panasonic), KTR10EZPF3302 (Rohm), or RMCF0805FT33K0 (Stackpole).
• For applications requiring high-voltage performance, KTR10EZPF3302 is specified with high-voltage features.
• For applications requiring moisture-resistant construction, RC0805FR-0733KL (YAGEO) is specified with moisture-resistant properties.

Packaging and Availability:

• CRG0805F33K (TE Connectivity) offers the highest inventory availability at 40,641 pieces.
• ERJ-6ENF3302V (Panasonic) provides 157,304 pieces in stock.
• RMCF0805FT33K0 (Stackpole) provides 77,613 pieces in stock.
• RC0805FR-0733KL (YAGEO) provides 134,543 pieces in stock.

Physical Dimensions:

• All parts conform to 0805 (2012 Metric) package dimensions of 2.00mm L × 1.25mm W.
• Height variations range from 0.60mm to 0.70mm maximum seated height; verify PCB assembly equipment compatibility if height-constrained applications exist.

Frequently Asked Questions (FAQ)

Q: Can RMC1/10K3302FTP be directly replaced with any of the listed substitute parts?

A: Yes. All listed substitute parts meet the core electrical and mechanical specifications: 33 kOhms ±1%, 0.125W power rating, 0805 package, ±100ppm/°C temperature coefficient, and -55°C to 155°C operating range. Direct substitution is electrically and mechanically valid.

Q: What is the difference between the main part and substitutes with AEC-Q200 certification?

A: The RMC1/10K3302FTP does not carry AEC-Q200 automotive qualification. ERJ-6ENF3302V, KTR10EZPF3302, and RMCF0805FT33K0 are qualified to AEC-Q200 standards. If your application requires automotive-grade components, select one of these three alternatives.

Q: Does the moisture-resistant feature of RC0805FR-0733KL affect substitution compatibility?

A: No. Moisture-resistant construction is an enhanced feature that does not prevent substitution. It is an additional property that may be required by specific application environments. The core electrical and mechanical parameters remain equivalent.

Q: Are there packaging format differences between these parts?

A: The main part RMC1/10K3302FTP is supplied in Tape & Reel (TR) format. ERJ-6ENF3302V and RC0805FR-0733KL are supplied in Cut Tape (CT) & Digi-Reel® format. CRG0805F33K, KTR10EZPF3302, and RMCF0805FT33K0 are supplied in Tape & Reel (TR) format. Verify packaging compatibility with your procurement and assembly processes.

Q: What is the significance of the height differences shown in the parameter comparison table?

A: All parts conform to the 0805 (2012 Metric) package standard. Height variations (0.60mm to 0.70mm maximum) fall within standard package tolerances and do not affect electrical performance. Verify compatibility with PCB assembly equipment if height-constrained applications or high-density layouts exist.

Q: Are all substitute parts RoHS3 compliant?

A: All substitute parts listed carry ROHS3 Compliant status. The main part RMC1/10K3302FTP does not specify RoHS status in the provided data. If RoHS3 compliance is required, select from the substitute parts.

Q: Which substitute part offers the best inventory availability?

A: ERJ-6ENF3302V (Panasonic) offers the highest inventory with 157,304 pieces in stock, followed by RC0805FR-0733KL (YAGEO) with 134,543 pieces.