RMC1/10K2153FTP Equivalent & Substitute Parts

Part Overview

The RMC1/10K2153FTP is a 215 kOhms ±1% 0.125W (1/8W) chip resistor manufactured by Kamaya Inc. in the 0805 (2012 Metric) package. This thick film resistor operates across the temperature range of -55°C to 155°C and is classified as Active product status. Substitute parts are necessary to address inventory availability, supply chain continuity, or specific application requirements such as automotive qualification or enhanced moisture resistance.

Substiute Parts

RMC1/10K2153FTP

Kamaya Inc.In Stock: 978RMC1/10K2153FTP Datasheet

Current PartRFQ

ERJ-6ENF2153V

Panasonic Electronic ComponentsIn Stock: 83188ERJ-6ENF2153V Datasheet

DirectRFQ

MCR10ERTF2153

Rohm SemiconductorIn Stock: 2606MCR10ERTF2153 Datasheet

DirectRFQ

RC0805FR-07215KL

YAGEOIn Stock: 231490RC0805FR-07215KL Datasheet

DirectRFQ

RMCF0805FT215K

Stackpole Electronics IncIn Stock: 6079RMCF0805FT215K Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the RMC1/10K2153FTP is determined by strict equivalence across the following parameters:

Critical Matching Parameters:

• Resistance value: 215 kOhms
• Tolerance: ±1%
• Power rating: 0.125W (1/8W)
• Package: 0805 (2012 Metric)
• Composition: Thick Film
• Temperature coefficient: ±100ppm/°C
• Operating temperature range: -55°C ~ 155°C
• Termination count: 2
• MSL rating: 1 (Unlimited)

All substitute parts listed meet these electrical and mechanical specifications. Variations in physical dimensions (height, length, width) within the 0805 package specification, packaging format (Tape & Reel vs. Cut Tape), and optional certifications (AEC-Q200, moisture resistance features) do not affect functional substitutability but may influence selection based on application requirements.

Parameter Comparison

Engineering Selection Recommendations

Active Status Parts (Preferred for New Designs):

• ERJ-6ENF2153V (Panasonic): Active status with Automotive AEC-Q200 certification. Suitable for automotive and high-reliability applications.
• RC0805FR-07215KL (YAGEO): Active status with moisture-resistant feature and ROHS3 compliance. High inventory availability (231,474 pcs).
• RMCF0805FT215K (Stackpole): Active status with Automotive AEC-Q200 certification and ROHS3 compliance.

Discontinued Status:

• MCR10ERTF2153 (Rohm): Discontinued at DiGi Electronics. Use only for legacy system maintenance or when existing supply is available.

Compliance Considerations: All substitute parts carry REACH Unaffected and EAR99 ECCN classifications, matching the original part. ROHS3 compliance is documented for all substitute parts except the original RMC1/10K2153FTP. Selection should prioritize parts with Active product status for long-term supply chain security.

Frequently Asked Questions (FAQ)

Q: Can ERJ-6ENF2153V replace RMC1/10K2153FTP in automotive applications? A: Yes. ERJ-6ENF2153V meets all electrical and mechanical specifications of RMC1/10K2153FTP and carries Automotive AEC-Q200 certification, making it suitable for automotive-grade applications.

Q: What is the difference between RC0805FR-07215KL and other substitutes? A: RC0805FR-07215KL features moisture-resistant construction and has the highest inventory availability (231,474 pcs). All other electrical parameters are equivalent to the original part.

Q: Is MCR10ERTF2153 still available for new designs? A: MCR10ERTF2153 is discontinued at DiGi Electronics. It should not be selected for new designs. Use active-status alternatives: ERJ-6ENF2153V, RC0805FR-07215KL, or RMCF0805FT215K.

Q: Do all substitute parts fit the same PCB footprint? A: Yes. All parts use the 0805 (2012 Metric) package. Minor variations in maximum seated height (0.024" to 0.028") fall within standard 0805 package tolerances and do not affect PCB layout compatibility.

Q: What is the difference between Tape & Reel and Cut Tape packaging? A: Tape & Reel (TR) is standard for high-volume automated assembly. Cut Tape (CT) is used for lower-volume or manual assembly. Both formats contain identical components; packaging choice depends on assembly process requirements.

Q: Are all substitute parts ROHS3 compliant? A: All substitute parts are documented as ROHS3 compliant. The original RMC1/10K2153FTP does not specify RoHS status in the provided data.