RMC1/10K2103FTP Equivalent & Substitute Parts

Part Overview

The RMC1/10K2103FTP is a 210 kOhms ±1% 0.125W thick film chip resistor manufactured by Kamaya Inc. in 0805 (2012 Metric) surface mount package format. This component is classified as Active product status and is supplied in Tape & Reel packaging. Substitute parts are identified when equivalent electrical specifications, mechanical dimensions, and packaging standards align with the original component, enabling direct replacement in circuit applications without design modification.

Substiute Parts

RMC1/10K2103FTP

Kamaya Inc.In Stock: 852RMC1/10K2103FTP Datasheet

Current PartRFQ

ERJ-6ENF2103V

Panasonic Electronic ComponentsIn Stock: 45791ERJ-6ENF2103V Datasheet

DirectRFQ

KTR10EZPF2103

Rohm SemiconductorIn Stock: 10917KTR10EZPF2103 Datasheet

DirectRFQ

RC0805FR-07210KL

YAGEOIn Stock: 77082RC0805FR-07210KL Datasheet

DirectRFQ

RMCF0805FT210K

Stackpole Electronics IncIn Stock: 34987RMCF0805FT210K Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the RMC1/10K2103FTP is determined by strict equivalence across the following parameters:

Mandatory Matching Parameters:

• Resistance value: 210 kOhms
• Tolerance: ±1%
• Power rating: 0.125W (1/8W)
• Package: 0805 (2012 Metric)
• Composition: Thick Film
• Temperature coefficient: ±100ppm/°C
• Operating temperature range: -55°C ~ 155°C
• Moisture sensitivity level: 1 (Unlimited)
• Termination count: 2

All four substitute parts listed meet these mandatory parameters. Variations in physical height (seated maximum), manufacturer certifications (such as AEC-Q200), and additional features (such as moisture resistance or high voltage capability) do not disqualify substitution but represent secondary differentiators for specific application requirements.

Parameter Comparison

Engineering Selection Recommendations

All four substitute parts are electrically and mechanically equivalent to the RMC1/10K2103FTP based on core parameters: resistance, tolerance, power rating, package format, composition, temperature coefficient, and operating temperature range.

Selection Considerations Based on Provided Data:

ERJ-6ENF2103V (Panasonic Electronic Components): Active product status with AEC-Q200 automotive qualification. Seated height maximum of 0.028" (0.70mm) represents the highest profile among substitutes. ROHS3 compliant.

KTR10EZPF2103 (Rohm Semiconductor): Active product status with AEC-Q200 automotive qualification and high voltage feature designation. Seated height maximum of 0.026" (0.65mm) matches the original part. ROHS3 compliant.

RC0805FR-07210KL (YAGEO): Active product status with moisture resistant feature. Seated height maximum of 0.024" (0.60mm) represents the lowest profile. ROHS3 compliant. Highest inventory availability at 77,030 pieces.

RMCF0805FT210K (Stackpole Electronics Inc): Active product status with AEC-Q200 automotive qualification. Seated height maximum of 0.026" (0.65mm) matches the original part. ROHS3 compliant.

Component selection should prioritize applications where physical height constraints, automotive qualification requirements, or moisture resistance specifications align with circuit board design parameters.

Frequently Asked Questions (FAQ)

Q: Can ERJ-6ENF2103V replace RMC1/10K2103FTP in all applications?

A: ERJ-6ENF2103V meets all mandatory electrical and mechanical parameters. The seated height maximum of 0.028" (0.70mm) is 0.002" higher than the original part. Verify clearance in applications with height-constrained PCB layouts.

Q: What is the difference between AEC-Q200 certified and non-certified versions?

A: AEC-Q200 certification indicates automotive-grade qualification testing. ERJ-6ENF2103V, KTR10EZPF2103, and RMCF0805FT210K carry this certification. The original RMC1/10K2103FTP does not specify this certification. Selection depends on application automotive requirements.

Q: Does the "High Voltage" feature of KTR10EZPF2103 affect substitution compatibility?

A: High voltage designation is an additional feature that does not alter the core electrical specifications (210 kOhms, ±1%, 0.125W). This feature provides enhanced capability for high voltage applications but does not restrict use in standard applications.

Q: Why does RC0805FR-07210KL have the lowest seated height?

A: RC0805FR-07210KL is specified with a seated height maximum of 0.024" (0.60mm), compared to 0.026" (0.65mm) for the original part. This dimensional difference is within typical manufacturing tolerances for 0805 package format and does not affect electrical performance.

Q: Are all substitute parts ROHS3 compliant?

A: ERJ-6ENF2103V, KTR10EZPF2103, RC0805FR-07210KL, and RMCF0805FT210K are all specified as ROHS3 compliant. The original RMC1/10K2103FTP does not specify RoHS status in the provided data.

Q: Can these parts be used interchangeably in tape and reel format?

A: All substitute parts are supplied in Tape & Reel (TR) packaging, matching the original part format. Reel specifications and tape dimensions are standard for 0805 package format across manufacturers.

Q: What is Moisture Sensitivity Level 1 (Unlimited)?

A: MSL 1 (Unlimited) indicates the component has no moisture sensitivity restrictions and does not require special handling, storage, or baking procedures prior to soldering. All listed parts share this specification.