RMC1/10K2003FTP Equivalent & Substitute Parts

Part Overview

The RMC1/10K2003FTP is a 200 kOhms ±1% 0.125W thick film chip resistor manufactured by Kamaya Inc. in 0805 (2012 Metric) surface mount package format. This component is classified as Active product status with full REACH compliance and EAR99 export classification. Substitute parts are identified when electrical specifications, mechanical dimensions, and packaging formats align with the original component, enabling direct replacement in circuit designs without functional degradation.

Substiute Parts

RMC1/10K2003FTP

Kamaya Inc.In Stock: 833RMC1/10K2003FTP Datasheet

Current PartRFQ

CRG0805F200K

TE Connectivity Passive ProductIn Stock: 1231CRG0805F200K Datasheet

DirectRFQ

ERJ-6ENF2003V

Panasonic Electronic ComponentsIn Stock: 153386ERJ-6ENF2003V Datasheet

DirectRFQ

KTR10EZPF2003

Rohm SemiconductorIn Stock: 65816KTR10EZPF2003 Datasheet

DirectRFQ

RC0805FR-07200KL

YAGEOIn Stock: 5119RC0805FR-07200KL Datasheet

DirectRFQ

RMCF0805FG200K

Stackpole Electronics IncIn Stock: 28742RMCF0805FG200K Datasheet

DirectRFQ

RMCF0805FT200K

Stackpole Electronics IncIn Stock: 481424RMCF0805FT200K Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the RMC1/10K2003FTP is determined by strict equivalence across the following parameters:

Primary Electrical Criteria:

• Resistance value: 200 kOhms (exact match required)
• Tolerance: ±1% (exact match required)
• Power rating: 0.125W / 1/8W (exact match required)
• Temperature coefficient: ±100ppm/°C (exact match required)
• Operating temperature range: -55°C ~ 155°C (exact match required)

Mechanical & Packaging Criteria:

• Package format: 0805 (2012 Metric) (exact match required)
• Composition: Thick Film (exact match required)
• Number of terminations: 2 (exact match required)
• Moisture sensitivity level: 1 (Unlimited) (exact match required)

Compliance & Regulatory Criteria:

• RoHS3 compliance status
• REACH compliance status
• ECCN classification: EAR99

All five substitute parts listed meet these core substitution criteria. Variations in packaging format (Tape & Reel vs. Cut Tape), height seated maximum, and optional certifications (AEC-Q200, High Voltage, Moisture Resistant) do not disqualify substitution but indicate application-specific enhancements.

Parameter Comparison

Engineering Selection Recommendations

All five substitute parts are functionally equivalent to the RMC1/10K2003FTP based on core electrical and mechanical parameters. Selection among substitutes should be based on the following factors:

Compliance & Certification Status:

• ERJ-6ENF2003V, KTR10EZPF2003, RMCF0805FG200K, and RMCF0805FT200K carry AEC-Q200 automotive qualification. These parts are suitable for automotive and high-reliability applications requiring formal qualification documentation.
• RC0805FR-07200KL includes moisture-resistant construction, applicable to environments with elevated humidity exposure.
• CRG0805F200K provides standard industrial-grade performance without automotive certification.

Inventory & Availability:

• RMCF0805FT200K (Stackpole) offers the highest inventory level at 481,392 pieces.
• ERJ-6ENF2003V (Panasonic) provides 153,362 pieces.
• KTR10EZPF2003 (Rohm) stocks 65,732 pieces.
• RMCF0805FG200K (Stackpole) stocks 28,722 pieces.
• RC0805FR-07200KL (YAGEO) stocks 5,100 pieces.
• CRG0805F200K (TE Connectivity) stocks 1,179 pieces.

Packaging Format:

• RMCF0805FT200K, RMCF0805FG200K, ERJ-6ENF2003V, KTR10EZPF2003, and CRG0805F200K are supplied in Tape & Reel (TR) format.
• RC0805FR-07200KL is supplied in Cut Tape (CT) & Digi-Reel® format.

RoHS3 Compliance: All substitute parts are ROHS3 compliant. The original RMC1/10K2003FTP does not specify RoHS status but is REACH Unaffected.

Frequently Asked Questions (FAQ)

Q: Can I substitute any of these parts directly into a circuit designed for RMC1/10K2003FTP?

A: Yes. All listed substitute parts meet the core electrical specifications (200 kOhms ±1%, 0.125W, ±100ppm/°C, -55°C ~ 155°C) and mechanical requirements (0805 package, thick film composition, 2 terminations, MSL 1). Direct substitution is electrically and mechanically compatible.

Q: What is the difference between Tape & Reel and Cut Tape packaging?

A: Tape & Reel (TR) packaging is supplied on continuous carrier tape wound on reels, suitable for automated pick-and-place assembly. Cut Tape (CT) & Digi-Reel® is supplied in shorter tape segments on plastic reels, suitable for lower-volume manual assembly or mixed-component orders. Both formats contain identical components; packaging format selection depends on assembly process requirements.

Q: Why do some substitute parts have AEC-Q200 certification?

A: AEC-Q200 is an automotive industry qualification standard. Parts carrying this certification have undergone additional reliability testing and are approved for automotive applications. If your application does not require automotive qualification, standard industrial-grade parts (such as CRG0805F200K) are functionally equivalent.

Q: Does the height difference between substitute parts affect PCB assembly?

A: The height variations (0.024" to 0.028" seated maximum) are within standard 0805 package tolerances and do not affect PCB assembly compatibility. All parts are designed for standard 0805 footprints.

Q: Are all substitute parts REACH compliant?

A: Four substitute parts (ERJ-6ENF2003V, KTR10EZPF2003, RC0805FR-07200KL, RMCF0805FG200K, RMCF0805FT200K) are REACH Unaffected. CRG0805F200K lists REACH status as Vendor Undefined. The original RMC1/10K2003FTP is REACH Unaffected.

Q: Which substitute part offers the best availability?

A: RMCF0805FT200K (Stackpole Electronics Inc) offers the highest inventory at 481,392 pieces in stock, followed by ERJ-6ENF2003V (Panasonic) at 153,362 pieces.

Q: Can I use RC0805FR-07200KL in place of the original part if my application requires moisture resistance?

A: Yes. RC0805FR-07200KL meets all core electrical and mechanical specifications and includes moisture-resistant construction. It is suitable for applications with elevated humidity exposure while maintaining full electrical equivalence.