RMC1/10K1963FTP Equivalent & Substitute Parts

Part Overview

The RMC1/10K1963FTP is a 196 kOhms ±1% 0.125W thick film chip resistor in 0805 (2012 Metric) package manufactured by Kamaya Inc. This component is classified as Active status with 715 pieces currently in stock. The RMC series represents a standard general-purpose resistor suitable for industrial and commercial applications. Substitute parts are necessary to address supply chain continuity, alternative sourcing options, or specific application requirements such as automotive qualification or enhanced moisture resistance.

Substiute Parts

RMC1/10K1963FTP

Kamaya Inc.In Stock: 825RMC1/10K1963FTP Datasheet

Current PartRFQ

ERJ-6ENF1963V

Panasonic Electronic ComponentsIn Stock: 65347ERJ-6ENF1963V Datasheet

DirectRFQ

MCR10ERTF1963

Rohm SemiconductorIn Stock: 6246MCR10ERTF1963 Datasheet

DirectRFQ

RC0805FR-07196KL

YAGEOIn Stock: 283280RC0805FR-07196KL Datasheet

DirectRFQ

RMCF0805FT196K

Stackpole Electronics IncIn Stock: 20316RMCF0805FT196K Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the RMC1/10K1963FTP is determined by strict equivalence across the following critical parameters:

Mandatory Matching Parameters:

• Resistance value: 196 kOhms
• Tolerance: ±1%
• Power rating: 0.125W (1/8W)
• Package: 0805 (2012 Metric)
• Composition: Thick Film
• Temperature coefficient: ±100ppm/°C
• Operating temperature range: -55°C ~ 155°C
• Moisture sensitivity level: 1 (Unlimited)
• Number of terminations: 2

All four substitute parts listed meet these mandatory parameters. Differences exist only in manufacturer identity, packaging format (Tape & Reel vs. Cut Tape), physical height tolerances (ranging from 0.024" to 0.028"), and optional certifications (AEC-Q200 automotive qualification or moisture-resistant construction). These differences do not affect electrical interchangeability.

Parameter Comparison

Engineering Selection Recommendations

ERJ-6ENF1963V (Panasonic Electronic Components): This substitute carries AEC-Q200 automotive qualification and ROHS3 compliance. It is suitable for applications requiring automotive-grade reliability. Current inventory is 65,295 pieces. The maximum seated height of 0.028" (0.70mm) is within acceptable tolerance for standard 0805 footprints.

MCR10ERTF1963 (Rohm Semiconductor): This part is discontinued at DiGi Electronics and carries ROHS3 compliance. While electrically equivalent, its discontinued status limits long-term supply availability. Current inventory is 6,168 pieces. Use only when existing stock is available and future replenishment is not required.

RC0805FR-07196KL (YAGEO): This substitute features moisture-resistant construction and ROHS3 compliance. It offers the lowest maximum seated height at 0.024" (0.60mm), which may be advantageous for space-constrained PCB layouts. Current inventory is 283,192 pieces, providing the highest availability among all substitutes.

RMCF0805FT196K (Stackpole Electronics Inc): This substitute carries AEC-Q200 automotive qualification and ROHS3 compliance. It is suitable for automotive applications. Current inventory is 20,275 pieces. The maximum seated height of 0.026" (0.65mm) matches the original RMC1/10K1963FTP specification.

All four substitutes are electrically and mechanically interchangeable with the RMC1/10K1963FTP for standard applications. Selection should be based on supply chain requirements, compliance certifications needed, and packaging format preferences.

Frequently Asked Questions (FAQ)

Q: Can ERJ-6ENF1963V replace RMC1/10K1963FTP in automotive applications?

A: Yes. ERJ-6ENF1963V carries AEC-Q200 automotive qualification and meets all electrical and mechanical parameters of the RMC1/10K1963FTP. Both components share identical resistance, tolerance, power rating, package, and operating temperature specifications.

Q: What is the difference between Tape & Reel and Cut Tape packaging?

A: Tape & Reel (TR) packaging is supplied on continuous carrier tape suitable for automated pick-and-place assembly. Cut Tape (CT) is supplied as individual segments cut from the carrier tape. Both formats contain the same component; the difference is in handling and assembly process compatibility.

Q: Is RC0805FR-07196KL suitable for high-moisture environments?

A: RC0805FR-07196KL features moisture-resistant construction. All listed substitutes carry MSL rating 1 (Unlimited), indicating unlimited shelf life under uncontrolled conditions. The moisture-resistant feature of RC0805FR-07196KL provides additional protection in high-humidity applications.

Q: Why is MCR10ERTF1963 marked as discontinued?

A: MCR10ERTF1963 is discontinued at DiGi Electronics, meaning it is no longer actively distributed through this channel. However, existing inventory of 6,168 pieces remains available. For new designs, use active-status alternatives such as ERJ-6ENF1963V, RC0805FR-07196KL, or RMCF0805FT196K.

Q: Do all substitutes fit the same PCB footprint as RMC1/10K1963FTP?

A: Yes. All substitutes use the 0805 (2012 Metric) package with identical length (0.079") and width (0.049"). Maximum seated heights range from 0.024" to 0.028", all within standard 0805 component tolerances. PCB footprints designed for 0805 resistors accommodate all listed parts.

Q: Which substitute offers the best long-term supply availability?

A: RC0805FR-07196KL (YAGEO) offers the highest current inventory at 283,192 pieces, providing the strongest supply continuity. RMCF0805FT196K (Stackpole) with 20,275 pieces and ERJ-6ENF1963V (Panasonic) with 65,295 pieces also provide substantial availability.

Q: Are all substitutes RoHS compliant?

A: All four substitutes carry ROHS3 compliance certification. The original RMC1/10K1963FTP does not specify RoHS status in the provided data. If RoHS compliance is required, use ERJ-6ENF1963V, MCR10ERTF1963, RC0805FR-07196KL, or RMCF0805FT196K.