RMC1/10K1690FTP Equivalent & Substitute Parts

Part Overview

The RMC1/10K1690FTP is a 169 Ohm ±1% 0.125W (1/8W) chip resistor manufactured by Kamaya Inc. in the 0805 (2012 Metric) package. This thick film resistor operates across a temperature range of -55°C to 155°C with a temperature coefficient of ±100ppm/°C. The part is currently active and available in tape and reel packaging with 873 pieces in stock. Equivalent and substitute parts are identified to support component procurement flexibility, supply chain continuity, and application-specific requirements such as automotive qualification or enhanced moisture resistance.

Substiute Parts

RMC1/10K1690FTP

Kamaya Inc.In Stock: 954RMC1/10K1690FTP Datasheet

Current PartRFQ

ERJ-6ENF1690V

Panasonic Electronic ComponentsIn Stock: 85019ERJ-6ENF1690V Datasheet

DirectRFQ

RC0805FR-07169RL

YAGEOIn Stock: 190936RC0805FR-07169RL Datasheet

DirectRFQ

KTR10EZPF1690

Rohm SemiconductorIn Stock: 9581KTR10EZPF1690 Datasheet

Parametric EquivalentRFQ

RMCF0805FT169R

Stackpole Electronics IncIn Stock: 69157RMCF0805FT169R Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the RMC1/10K1690FTP are qualified based on the following critical parameters:

Electrical Parameters:

• Resistance value: 169 Ohms
• Tolerance: ±1%
• Power rating: 0.125W (1/8W)
• Temperature coefficient: ±100ppm/°C
• Operating temperature range: -55°C to 155°C

Mechanical Parameters:

• Package type: 0805 (2012 Metric)
• Number of terminations: 2
• Composition: Thick Film
• Packaging format: Tape & Reel (TR)

Compliance Parameters:

• Moisture Sensitivity Level: 1 (Unlimited)
• REACH Status: REACH Unaffected
• ECCN: EAR99
• HTSUS: 8533.21.0030

All substitute parts listed meet or exceed these core parameters. Additional features such as automotive AEC-Q200 qualification or moisture-resistant construction represent enhanced capabilities that do not preclude substitution.

Parameter Comparison

Engineering Selection Recommendations

All listed substitute parts are functionally equivalent to the RMC1/10K1690FTP based on core electrical and mechanical parameters. Selection among these alternatives is determined by application-specific requirements and compliance certifications:

ERJ-6ENF1690V (Panasonic Electronic Components): This part carries automotive AEC-Q200 qualification, making it suitable for automotive applications requiring enhanced reliability standards. It is ROHS3 compliant and maintains identical electrical specifications to the main part.

RC0805FR-07169RL (YAGEO): This part features moisture-resistant construction and is ROHS3 compliant. It offers the lowest seated height (0.024" / 0.60mm) among the substitute options, which may be advantageous in space-constrained applications.

KTR10EZPF1690 (Rohm Semiconductor): This part combines automotive AEC-Q200 qualification with high-voltage capability. It is ROHS3 compliant and maintains the same seated height as the main part (0.026" / 0.65mm).

RMCF0805FT169R (Stackpole Electronics Inc): This part carries automotive AEC-Q200 qualification and is ROHS3 compliant. It matches the seated height of the main part (0.026" / 0.65mm).

All substitute parts maintain REACH Unaffected status and EAR99 export classification consistent with the main part.

Frequently Asked Questions (FAQ)

Q: Can ERJ-6ENF1690V be used as a direct replacement for RMC1/10K1690FTP?

A: Yes. The ERJ-6ENF1690V meets all core electrical and mechanical parameters: 169 Ohms ±1%, 0.125W power rating, 0805 package, ±100ppm/°C temperature coefficient, and -55°C to 155°C operating range. The automotive AEC-Q200 qualification is an additional feature that does not prevent substitution in non-automotive applications.

Q: What is the difference between the substitute parts in terms of physical dimensions?

A: All parts use the 0805 (2012 Metric) package with identical length (0.079" / 2.00mm) and width (0.049" / 1.25mm). Seated height varies slightly: RC0805FR-07169RL is 0.024" (0.60mm), while RMC1/10K1690FTP, KTR10EZPF1690, and RMCF0805FT169R are 0.026" (0.65mm), and ERJ-6ENF1690V is 0.028" (0.70mm). These variations are within standard PCB assembly tolerances.

Q: Are all substitute parts RoHS compliant?

A: The substitute parts ERJ-6ENF1690V, RC0805FR-07169RL, KTR10EZPF1690, and RMCF0805FT169R are all ROHS3 compliant. The main part RMC1/10K1690FTP does not specify RoHS status in the provided data.

Q: Which substitute part should be selected for automotive applications?

A: ERJ-6ENF1690V, KTR10EZPF1690, and RMCF0805FT169R all carry automotive AEC-Q200 qualification. Selection among these three depends on additional design requirements such as high-voltage capability (KTR10EZPF1690) or specific manufacturer preference.

Q: Do all parts have the same moisture sensitivity level?

A: Yes. All parts, including the main part RMC1/10K1690FTP and all substitutes, have Moisture Sensitivity Level (MSL) 1, which indicates unlimited shelf life without moisture control requirements.

Q: Can RC0805FR-07169RL be used in applications requiring moisture resistance?

A: Yes. RC0805FR-07169RL features moisture-resistant construction, which provides enhanced protection in humid environments. However, all listed parts maintain MSL 1 rating, indicating they do not require special moisture control during storage or handling.

Q: Are there any export or regulatory restrictions on these parts?

A: All parts, including the main part and substitutes, are classified as EAR99 and have REACH Unaffected status. They share the same HTSUS code (8533.21.0030), indicating no differential export or regulatory restrictions among the group.