RMC1/10K1372FTP Equivalent & Substitute Parts

Part Overview

The RMC1/10K1372FTP is a 13.7 kOhms ±1% 0.125W thick film chip resistor manufactured by Kamaya Inc. in 0805 (2012 Metric) surface mount package format. This component is classified as Active product status with 1015 pieces currently in stock. Substitute parts are necessary to address supply chain continuity, alternative packaging requirements, or specific application certifications such as automotive AEC-Q200 compliance.

Key Parameters

Parameter	Value
Resistance	13.7 kOhms
Tolerance	±1%
Power Rating	0.125W (1/8W)
Package / Case	0805 (2012 Metric)
Composition	Thick Film
Temperature Coefficient	±100ppm/°C
Operating Temperature Range	-55°C ~ 155°C
Moisture Sensitivity Level	1 (Unlimited)
Number of Terminations	2

Substitute Part Grouping Explanation

Substitution eligibility for the RMC1/10K1372FTP is determined by strict equivalence across the following parameters:

Critical Matching Parameters:

Resistance value: 13.7 kOhms
Tolerance: ±1%
Power rating: 0.125W (1/8W)
Package: 0805 (2012 Metric)
Composition: Thick Film
Temperature coefficient: ±100ppm/°C
Operating temperature range: -55°C ~ 155°C
Termination count: 2

All identified substitute parts meet these electrical and mechanical specifications. Variations in product features (such as automotive AEC-Q200 certification or moisture resistance enhancements) represent additional capabilities that do not prevent substitution but may provide enhanced performance for specific applications.

Parameter Comparison

Part Number	Manufacturer	Resistance	Tolerance	Power (W)	Package	Composition	Temp Coeff	Operating Temp	Height Max (mm)	Packaging Type	Product Status
RMC1/10K1372FTP	Kamaya Inc.	13.7 kΩ	±1%	0.125	0805	Thick Film	±100ppm/°C	-55~155°C	0.65	Tape & Reel	Active
ERJ-6ENF1372V	Panasonic Electronic Components	13.7 kΩ	±1%	0.125	0805	Thick Film	±100ppm/°C	-55~155°C	0.70	Tape & Reel	Active
KTR10EZPF1372	Rohm Semiconductor	13.7 kΩ	±1%	0.125	0805	Thick Film	±100ppm/°C	-55~155°C	0.65	Tape & Reel	Active
MCR10ERTF1372	Rohm Semiconductor	13.7 kΩ	±1%	0.125	0805	Thick Film	±100ppm/°C	-55~155°C	0.65	Cut Tape & Digi-Reel	Discontinued at DiGi Electronics
RC0805FR-0713K7L	YAGEO	13.7 kΩ	±1%	0.125	0805	Thick Film	±100ppm/°C	-55~155°C	0.60	Cut Tape & Digi-Reel	Active
RMCF0805FT13K7	Stackpole Electronics Inc	13.7 kΩ	±1%	0.125	0805	Thick Film	±100ppm/°C	-55~155°C	0.65	Tape & Reel	Active

Engineering Selection Recommendations

Primary Substitutes (Active Status, Highest Availability):

RMCF0805FT13K7 (Stackpole Electronics Inc) is the preferred substitute, with 400,476 pieces in stock and Active product status. This part carries automotive AEC-Q200 certification, providing enhanced reliability for demanding applications while maintaining full electrical and mechanical compatibility.

RC0805FR-0713K7L (YAGEO) offers the second-highest inventory level (31,915 pieces) with Active status. This part includes moisture-resistant features and represents a cost-effective alternative with robust supply availability.

Secondary Substitutes (Active Status, Specialized Features):

ERJ-6ENF1372V (Panasonic Electronic Components) provides automotive AEC-Q200 certification with 28,917 pieces available. This part is suitable for automotive and high-reliability applications.

KTR10EZPF1372 (Rohm Semiconductor) combines automotive AEC-Q200 certification with high-voltage capability, offering 9,552 pieces in stock for applications requiring enhanced voltage performance.

Discontinued Alternative:

MCR10ERTF1372 (Rohm Semiconductor) is discontinued at DiGi Electronics but remains available with 1,442 pieces in stock. This part should be considered only when supply from active alternatives is constrained.

All substitute parts comply with ROHS3 requirements and carry REACH Unaffected status, matching the regulatory profile of the original component.

Frequently Asked Questions (FAQ)

Q: Can ERJ-6ENF1372V replace RMC1/10K1372FTP in standard applications?

A: Yes. Both parts share identical electrical specifications (13.7 kΩ ±1%, 0.125W, ±100ppm/°C, -55°C to 155°C). The ERJ-6ENF1372V includes automotive AEC-Q200 certification, which does not prevent substitution but adds qualification for automotive environments. Height difference is 0.70mm versus 0.65mm; verify PCB clearance if space-constrained.

Q: What is the difference between Tape & Reel and Cut Tape & Digi-Reel packaging?

A: Tape & Reel packaging is continuous and suitable for high-volume automated assembly. Cut Tape & Digi-Reel packaging is pre-cut and suitable for lower-volume or manual assembly processes. Both formats contain identical components; selection depends on assembly equipment and production volume requirements.

Q: Is RMCF0805FT13K7 suitable for automotive applications?

A: Yes. RMCF0805FT13K7 carries AEC-Q200 certification, which qualifies it for automotive use. It maintains full electrical compatibility with RMC1/10K1372FTP while providing automotive-grade reliability.

Q: Why does RC0805FR-0713K7L have a lower maximum height (0.60mm) than other substitutes?

A: Height variation within the 0805 package specification is normal across manufacturers. The 0.60mm height of RC0805FR-0713K7L remains within acceptable PCB assembly tolerances. Verify clearance in your specific PCB layout if height-critical applications are involved.

Q: Can MCR10ERTF1372 still be used despite being discontinued?

A: MCR10ERTF1372 is discontinued at DiGi Electronics but remains electrically and mechanically equivalent. Use only if inventory from active alternatives is unavailable. Prioritize active-status parts (RMCF0805FT13K7, RC0805FR-0713K7L, ERJ-6ENF1372V, KTR10EZPF1372) for new designs and long-term supply security.

Q: Are all substitutes RoHS3 compliant?

A: Yes. All listed substitute parts carry RoHS3 Compliant status, matching the regulatory compliance of the original RMC1/10K1372FTP component.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message