RMC1/10K1102FTP Equivalent & Substitute Parts Reference

Part Overview

The Kamaya Inc. RMC1/10K1102FTP is an active, general-purpose thick film chip resistor with a resistance of 11 kOhms ±1%, rated at 0.125W (1/8W), housed in the 0805 (2012 metric) SMD package. It supports a temperature coefficient of ±100ppm/°C, an operating temperature range of -55°C to 155°C, and is supplied in Tape & Reel (TR) packaging.

Identifying substitute and equivalent chip resistors is necessary due to supply chain variability, inventory requirements, qualification needs, and multi-vendor sourcing. Alternatives must match or exceed the specified electrical, mechanical, and compliance parameters.

Substiute Parts

RMC1/10K1102FTP

Kamaya Inc.In Stock: 909RMC1/10K1102FTP Datasheet

Current PartRFQ

ERJ-6ENF1102V

Panasonic Electronic ComponentsIn Stock: 87940ERJ-6ENF1102V Datasheet

DirectRFQ

RC0805FR-0711KL

YAGEOIn Stock: 72898RC0805FR-0711KL Datasheet

DirectRFQ

CRG0805F11K

TE Connectivity Passive ProductIn Stock: 313333CRG0805F11K Datasheet

Parametric EquivalentRFQ

KTR10EZPF1102

Rohm SemiconductorIn Stock: 1941KTR10EZPF1102 Datasheet

Parametric EquivalentRFQ

RMCF0805FG11K0

Stackpole Electronics IncIn Stock: 10947RMCF0805FG11K0 Datasheet

Parametric EquivalentRFQ

RMCF0805FT11K0

Stackpole Electronics IncIn Stock: 28030RMCF0805FT11K0 Datasheet

Parametric EquivalentRFQ

SFR10EZPF1102

Rohm SemiconductorIn Stock: 5674SFR10EZPF1102 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution is determined strictly by matching the following mandatory parameters:

• Resistance: 11 kOhms
• Tolerance: ±1%
• Power Rating: 0.125W (1/8W)
• Composition: Thick Film
• Temperature Coefficient: ±100ppm/°C
• Operating Temperature: -55°C ~ 155°C
• Package / Case: 0805 (2012 Metric)
• Supplier Device Package: 0805
• Physical Dimensions: 0.079" x 0.049" (2.00mm x 1.25mm)
• Number of Terminations: 2
• Moisture Sensitivity Level (MSL): 1 (Unlimited) or equivalent
• Compliance: REACH, RoHS, and product status (Active)
• Packaging: Tape & Reel (TR) or equivalent

Parameter Comparison

Engineering Selection Recommendations

All listed substitutes and equivalent parts match the critical parameters, including electrical characteristics (resistance, tolerance, power), mechanical dimensions (0805 package, physical size, height), temperature rating, termination count, and compliance features (MSL, ROHS, REACH, product status). These components carry an active status and are available in standard packaging formats. All substitute part numbers are confirmed as suitable based on explicit matching to these provided criteria.

Frequently Asked Questions (FAQ)

Q1: What parameters must be matched to substitute RMC1/10K1102FTP?
A: Substitutes must strictly match resistance, tolerance, power, composition, temperature coefficient, operating temperature, package size, number of terminations, compliance, and packaging type.

Q2: Are substitutes compatible with automated SMD assembly?
A: All substitute components use the 0805 (2012 Metric) SMD package and offer Tape & Reel or equivalent packaging, supporting standard pick-and-place processes.

Q3: How do compliance certifications affect substitution?
A: Substitute parts must provide the same environmental compliance (RoHS, REACH) and Moisture Sensitivity Level (MSL 1 Unlimited) as the original part, ensuring equivalency in regulatory and handling standards.

Q4: Can differences in height or minor features affect substitution?
A: Substitution accepts parts with matching electrical and package dimensions; height variation within the provided range does not impact compatibility under the defined parameter set.

Q5: Is the operating temperature range identical among all substitutes?
A: Yes, all listed equivalents provide an operating temperature range from -55°C to 155°C.

Q6: What packaging options are supported for substitutes?
A: Tape & Reel (TR) and equivalent industry-standard packaging formats are supported, matching the main part's offerings.