RMC1/10-9R76FTP Equivalent & Substitute Parts

Part Overview

The RMC1/10-9R76FTP is a 9.76 Ohm ±1% thick film chip resistor manufactured by Kamaya Inc. in 0805 (2012 Metric) package format with 0.125W power rating. This component is classified as Active product status with full inventory availability (808 pieces in stock). Substitute parts are identified when equivalent electrical specifications, mechanical dimensions, and environmental ratings are maintained across alternative manufacturers, enabling procurement flexibility and supply chain continuity.

Substiute Parts

RMC1/10-9R76FTP

Kamaya Inc.In Stock: 873RMC1/10-9R76FTP Datasheet

Current PartRFQ

RC0805FR-079R76L

YAGEOIn Stock: 6986RC0805FR-079R76L Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the RMC1/10-9R76FTP is determined by strict equivalence across the following critical parameters:

Electrical Equivalence Requirements:

• Resistance value: 9.76 Ohms (exact match)
• Tolerance: ±1% (exact match)
• Power rating: 0.125W / 1/8W (exact match)

Mechanical Equivalence Requirements:

• Package type: 0805 (2012 Metric) (exact match)
• Physical dimensions: 0.079" L x 0.049" W (2.00mm x 1.25mm) (exact match)
• Number of terminations: 2 (exact match)

Environmental & Compliance Equivalence Requirements:

• Operating temperature range: -55°C ~ 155°C (exact match)
• Moisture Sensitivity Level: 1 (Unlimited) (exact match)
• Composition: Thick Film (exact match)
• REACH Status: REACH Unaffected (exact match)
• ECCN classification: EAR99 (exact match)

Substitute parts must satisfy all electrical, mechanical, and environmental criteria simultaneously. Deviations in any single parameter disqualify a part from substitution classification.

Parameter Comparison

Engineering Selection Recommendations

RC0805FR-079R76L (YAGEO) Substitution Eligibility:

The RC0805FR-079R76L qualifies as a direct substitute for RMC1/10-9R76FTP based on complete electrical and mechanical equivalence. Both components share identical resistance (9.76 Ohms), tolerance (±1%), power rating (0.125W), package format (0805), and operating temperature range (-55°C ~ 155°C).

Compliance Status: Both parts maintain Active product status and satisfy identical regulatory requirements: REACH Unaffected classification and EAR99 ECCN designation. Moisture Sensitivity Level 1 (Unlimited) is equivalent across both manufacturers, indicating no moisture-related handling restrictions during storage or assembly.

Physical Compatibility: Seated height differential (0.026" vs. 0.024") represents a 0.002" (0.05mm) reduction in the YAGEO substitute. This dimensional variance remains within typical PCB assembly tolerances and does not compromise mechanical fit or electrical performance in standard 0805 footprints.

Temperature Coefficient Consideration: The RMC1/10-9R76FTP specifies -200/+500ppm/°C temperature coefficient, while RC0805FR-079R76L specifies ±200ppm/°C. The YAGEO part exhibits tighter and more symmetrical temperature stability across the operating range. This represents an improvement in thermal performance characteristics.

Inventory & Availability: RC0805FR-079R76L demonstrates higher stock availability (6935 pieces) compared to RMC1/10-9R76FTP (808 pieces), supporting supply chain continuity and procurement flexibility.

Frequently Asked Questions (FAQ)

Q: Can RC0805FR-079R76L replace RMC1/10-9R76FTP in existing designs without PCB modification?

A: Yes. Both components are mechanically and electrically equivalent in 0805 package format. The 0.002" height difference is within standard PCB assembly tolerances and does not require footprint redesign.

Q: Are there any electrical performance differences between these two parts?

A: Electrical specifications (resistance, tolerance, power rating) are identical. Temperature coefficient differs: RMC1/10-9R76FTP uses -200/+500ppm/°C while RC0805FR-079R76L uses ±200ppm/°C. The YAGEO part provides tighter temperature stability.

Q: Do both parts require identical handling procedures?

A: Yes. Both components carry Moisture Sensitivity Level 1 (Unlimited), indicating no moisture-related storage or handling restrictions. Tape & Reel packaging format is identical.

Q: What is the significance of the "Moisture Resistant" feature listed for RC0805FR-079R76L?

A: This feature indicates enhanced moisture resistance in the thick film composition. Both parts maintain MSL 1 rating, but the YAGEO part includes additional moisture-resistant material treatment.

Q: Are both parts compliant with current export and environmental regulations?

A: Yes. Both RMC1/10-9R76FTP and RC0805FR-079R76L carry REACH Unaffected status and EAR99 ECCN classification, confirming compliance with current export control and environmental regulations.

Q: Can these parts be used interchangeably in high-temperature applications?

A: Yes. Both components operate across the identical temperature range (-55°C ~ 155°C). RC0805FR-079R76L provides superior temperature coefficient stability (±200ppm/°C vs. -200/+500ppm/°C).