Equivalent & Substitute Parts for RMC1/10-754JTP

Part Overview

The RMC1/10-754JTP is a 750 kOhms ±5% 0.125W (1/8W) chip resistor manufactured by Kamaya Inc. in the 0805 (2012 Metric) package format. This thick film resistor operates across the temperature range of -55°C to 155°C with a temperature coefficient of ±200ppm/°C. The part is currently in active production status with 948 units in stock.

Substitute parts are necessary when the original manufacturer's inventory is depleted, when design requirements demand enhanced specifications such as tighter tolerance or automotive qualification, or when supply chain optimization requires alternative sourcing from qualified manufacturers.

Substiute Parts

RMC1/10-754JTP

Kamaya Inc.In Stock: 1003RMC1/10-754JTP Datasheet

Current PartRFQ

ERJ-6GEYJ754V

Panasonic Electronic ComponentsIn Stock: 12602ERJ-6GEYJ754V Datasheet

DirectRFQ

RMCF0805JT750K

Stackpole Electronics IncIn Stock: 18342RMCF0805JT750K Datasheet

DirectRFQ

CRG0805F750K

TE Connectivity Passive ProductIn Stock: 1023CRG0805F750K Datasheet

UpgradeRFQ

ERJ-6ENF7503V

Panasonic Electronic ComponentsIn Stock: 123163ERJ-6ENF7503V Datasheet

UpgradeRFQ

KTR10EZPF7503

Rohm SemiconductorIn Stock: 3371KTR10EZPF7503 Datasheet

UpgradeRFQ

RC0805FR-07750KL

YAGEOIn Stock: 2429RC0805FR-07750KL Datasheet

UpgradeRFQ

RC0805JR-07750KL

YAGEOIn Stock: 8268RC0805JR-07750KL Datasheet

UpgradeRFQ

RMCF0805FT750K

Stackpole Electronics IncIn Stock: 52053RMCF0805FT750K Datasheet

UpgradeRFQ

RV0805FR-07750KL

YAGEOIn Stock: 5671RV0805FR-07750KL Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the RMC1/10-754JTP are classified into two categories based on electrical specifications:

Direct Substitutes (Equivalent Specifications): Parts that maintain the same resistance value (750 kOhms), tolerance (±5%), power rating (0.125W), package (0805), and operating temperature range (-55°C to 155°C). These parts are electrically and mechanically interchangeable with the original part. Direct substitutes include ERJ-6GEYJ754V and RMCF0805JT750K.

Upgrade Substitutes (Enhanced Specifications): Parts that maintain the same resistance value, power rating, package, and operating temperature range, but offer improved tolerance (±1% instead of ±5%) and/or lower temperature coefficient (±100ppm/°C instead of ±200ppm/°C). These parts provide superior performance characteristics while remaining mechanically compatible. Upgrade substitutes include CRG0805F750K, ERJ-6ENF7503V, KTR10EZPF7503, RC0805FR-07750KL, RMCF0805FT750K, and RV0805FR-07750KL.

Tolerance-Matched Direct Substitute: RC0805JR-07750KL maintains the original ±5% tolerance specification while offering moisture-resistant thick film composition.

All substitute parts share the following critical parameters with the main part:

• Resistance: 750 kOhms
• Power Rating: 0.125W (1/8W)
• Package: 0805 (2012 Metric)
• Composition: Thick Film
• Operating Temperature: -55°C to 155°C
• Moisture Sensitivity Level: MSL 1 (Unlimited)
• Number of Terminations: 2

Parameter Comparison

Engineering Selection Recommendations

For Direct Substitution (Equivalent Performance):

When the application requires exact electrical equivalence to the RMC1/10-754JTP, select from direct substitutes ERJ-6GEYJ754V or RMCF0805JT750K. Both parts maintain ±5% tolerance and ±200ppm/°C temperature coefficient. RMCF0805JT750K offers higher inventory availability (18248 units) and Automotive AEC-Q200 qualification. ERJ-6GEYJ754V provides 12527 units in stock with equivalent AEC-Q200 rating.

For Enhanced Performance Applications:

When circuit design permits tighter tolerance specifications, upgrade substitutes with ±1% tolerance and ±100ppm/°C temperature coefficient provide superior stability. RMCF0805FT750K (Stackpole Electronics Inc) offers the highest inventory level (52001 units) with Automotive AEC-Q200 qualification. ERJ-6ENF7503V (Panasonic Electronic Components) provides 123074 units with AEC-Q200 rating and is available in Cut Tape and Digi-Reel packaging options.

For Automotive Applications:

All direct substitutes and upgrade substitutes carry Automotive AEC-Q200 qualification except CRG0805F750K. For automotive designs, select from ERJ-6GEYJ754V, RMCF0805JT750K, ERJ-6ENF7503V, KTR10EZPF7503, RMCF0805FT750K, or RV0805FR-07750KL.

For High-Voltage Circuit Requirements:

KTR10EZPF7503 and RV0805FR-07750KL are specified with high-voltage thick film composition and Automotive AEC-Q200 qualification.

For Moisture-Resistant Applications:

RC0805FR-07750KL and RC0805JR-07750KL feature moisture-resistant thick film composition. RC0805FR-07750KL provides ±1% tolerance upgrade, while RC0805JR-07750KL maintains ±5% tolerance matching the original part.

Compliance Considerations:

All listed parts are RoHS3 compliant and REACH unaffected. All parts carry MSL 1 (Unlimited) moisture sensitivity rating, matching the original part's environmental classification.

Frequently Asked Questions (FAQ)

Q: Can I use an upgrade substitute with ±1% tolerance in place of the RMC1/10-754JTP with ±5% tolerance?

A: Yes. Upgrade substitutes with ±1% tolerance are electrically compatible and provide superior performance. The tighter tolerance range is a subset of the original ±5% specification, ensuring the part meets or exceeds the original design requirements. This substitution is valid for all applications where the original part was specified.

Q: What is the difference between direct substitutes and upgrade substitutes?

A: Direct substitutes (ERJ-6GEYJ754V, RMCF0805JT750K, RC0805JR-07750KL) maintain identical electrical specifications to the RMC1/10-754JTP, including ±5% tolerance and ±200ppm/°C temperature coefficient. Upgrade substitutes offer improved specifications with ±1% tolerance and ±100ppm/°C temperature coefficient, providing better stability across temperature variations and tighter resistance accuracy.

Q: Are all substitute parts mechanically compatible with the RMC1/10-754JTP?

A: Yes. All listed substitute parts use the 0805 (2012 Metric) package with identical footprint dimensions (0.079" L x 0.049" W / 2.00mm x 1.25mm). Physical mounting height varies slightly between manufacturers (0.024" to 0.028" seated height), but all parts are within standard PCB assembly tolerances and are mechanically interchangeable.

Q: Which substitute offers the best inventory availability?

A: ERJ-6ENF7503V (Panasonic Electronic Components) provides the highest inventory level with 123074 units in stock. This part offers ±1% tolerance upgrade, Automotive AEC-Q200 qualification, and ±100ppm/°C temperature coefficient. It is available in Cut Tape and Digi-Reel packaging options.

Q: Can I use RMCF0805FT750K as a direct replacement?

A: RMCF0805FT750K is an upgrade substitute, not a direct replacement. It maintains the same 750 kOhms resistance and 0.125W power rating in the 0805 package, but offers ±1% tolerance (versus ±5%) and ±100ppm/°C temperature coefficient (versus ±200ppm/°C). It is electrically compatible and provides superior performance characteristics.

Q: What is the difference between packaging options Tape & Reel (TR) and Cut Tape (CT) & Digi-Reel?

A: Tape & Reel (TR) packaging is supplied on continuous reels suitable for automated pick-and-place assembly equipment. Cut Tape (CT) & Digi-Reel packaging provides smaller quantities cut from the reel for manual assembly or lower-volume applications. Both packaging formats contain identical components; the difference is in supply format and quantity per package.

Q: Are all substitute parts RoHS3 compliant?

A: Yes. All listed substitute parts are RoHS3 compliant. The original RMC1/10-754JTP does not specify RoHS status, but all substitute parts meet RoHS3 requirements, ensuring compliance with current environmental regulations.

Q: Which substitute should I select for automotive applications?

A: For automotive applications, select from parts with Automotive AEC-Q200 qualification: ERJ-6GEYJ754V, RMCF0805JT750K, ERJ-6ENF7503V, KTR10EZPF7503, RMCF0805FT750K, or RV0805FR-07750KL. All these parts meet automotive industry qualification standards. RMCF0805FT750K offers the highest inventory availability (52001 units) among AEC-Q200 qualified upgrade substitutes.

Q: What does MSL 1 (Unlimited) moisture sensitivity mean?

A: MSL 1 (Unlimited) indicates the component has no moisture sensitivity limitations. These parts do not require special moisture-controlled storage or handling procedures and can be stored under standard warehouse conditions without time restrictions. All listed parts, including the original RMC1/10-754JTP, carry this MSL 1 rating.