RMC1/10-625JTP Equivalent & Substitute Parts

Part Overview

The RMC1/10-625JTP is a 6.2 MOhms ±5% 0.125W thick film chip resistor manufactured by Kamaya Inc. in 0805 (2012 Metric) package format. This component is classified as Active product status and is supplied in Tape & Reel packaging. The RMC1/10-625JTP serves applications requiring high-value resistive elements with standard tolerance specifications. Substitute parts are identified based on matching electrical characteristics (resistance value, tolerance, power rating) and mechanical compatibility (package type, dimensions, termination count).

Substiute Parts

RMC1/10-625JTP

Kamaya Inc.In Stock: 980RMC1/10-625JTP Datasheet

Current PartRFQ

RMCF0805JT6M20

Stackpole Electronics IncIn Stock: 5828RMCF0805JT6M20 Datasheet

DirectRFQ

KTR10EZPF6204

Rohm SemiconductorIn Stock: 11320KTR10EZPF6204 Datasheet

UpgradeRFQ

RC0805JR-076M2L

YAGEOIn Stock: 15584RC0805JR-076M2L Datasheet

UpgradeRFQ

RMCF0805FT6M20

Stackpole Electronics IncIn Stock: 11120RMCF0805FT6M20 Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the RMC1/10-625JTP are classified based on electrical and mechanical parameter alignment:

Direct Substitutes (Equivalent Specifications): Parts maintaining identical resistance (6.2 MOhms), tolerance (±5%), power rating (0.125W), package (0805), and operating temperature range (-55°C ~ 155°C). These parts are interchangeable without circuit redesign.

Upgrade Substitutes (Enhanced Specifications): Parts with improved tolerance (±1% versus ±5%) or additional certifications (AEC-Q200 automotive qualification, high voltage rating, moisture resistance) while maintaining core electrical and mechanical compatibility. These parts provide enhanced performance characteristics within the same package footprint.

Critical Matching Parameters:

• Resistance value: 6.2 MOhms (exact match required)
• Package: 0805 (2012 Metric) (exact match required)
• Power rating: 0.125W minimum (exact match required)
• Operating temperature: -55°C ~ 155°C minimum (exact match required)
• Termination count: 2 (exact match required)

Parameter Comparison

Engineering Selection Recommendations

For Direct Replacement (Equivalent Performance): RMCF0805JT6M20 (Stackpole Electronics Inc) provides direct electrical and mechanical equivalence to RMC1/10-625JTP with identical tolerance (±5%) and temperature coefficient (±200ppm/°C). This part adds AEC-Q200 automotive qualification and ROHS3 compliance without altering circuit behavior.

For Enhanced Tolerance Applications: KTR10EZPF6204 (Rohm Semiconductor) and RMCF0805FT6M20 (Stackpole Electronics Inc) both offer ±1% tolerance versus the original ±5%, reducing resistive value drift. KTR10EZPF6204 includes high voltage rating and lower temperature coefficient (±100ppm/°C). RMCF0805FT6M20 maintains ±200ppm/°C temperature coefficient. Both carry AEC-Q200 certification and ROHS3 compliance.

For Moisture-Sensitive Environments: RC0805JR-076M2L (YAGEO) incorporates moisture-resistant construction with ±100ppm/°C temperature coefficient and ±5% tolerance. This part maintains electrical equivalence while providing enhanced environmental protection. ROHS3 compliant.

Compliance Considerations: All substitute parts maintain REACH Unaffected status and EAR99 ECCN classification. RMCF0805JT6M20, KTR10EZPF6204, RC0805JR-076M2L, and RMCF0805FT6M20 are ROHS3 compliant, supporting regulatory requirements for restricted substance elimination.

Frequently Asked Questions (FAQ)

Q: Can RMCF0805JT6M20 replace RMC1/10-625JTP in existing designs? A: Yes. RMCF0805JT6M20 maintains identical electrical specifications (6.2 MOhms ±5%, 0.125W) and mechanical compatibility (0805 package, -55°C ~ 155°C operating range). The addition of AEC-Q200 automotive qualification does not affect circuit operation.

Q: What is the difference between ±5% and ±1% tolerance substitutes? A: Tolerance defines the maximum deviation from the nominal 6.2 MOhms value. ±5% tolerance allows deviation up to ±310 kOhms; ±1% tolerance restricts deviation to ±62 kOhms. Applications requiring tighter resistive accuracy should use ±1% parts (KTR10EZPF6204 or RMCF0805FT6M20).

Q: Are all substitute parts in the same 0805 package? A: Yes. All listed substitutes use 0805 (2012 Metric) package with identical dimensions (0.079" L x 0.049" W / 2.00mm x 1.25mm) and two terminations, ensuring direct PCB footprint compatibility.

Q: What does AEC-Q200 certification indicate? A: AEC-Q200 is an automotive qualification standard. Parts bearing this certification (RMCF0805JT6M20, KTR10EZPF6204, RMCF0805FT6M20) meet automotive industry reliability and performance requirements. This certification does not affect non-automotive applications.

Q: Which substitute offers the lowest temperature coefficient? A: KTR10EZPF6204 and RC0805JR-076M2L both feature ±100ppm/°C temperature coefficient, compared to ±200ppm/°C in the original RMC1/10-625JTP. Lower temperature coefficient indicates reduced resistive value drift across the -55°C ~ 155°C operating range.

Q: Is moisture resistance important for my application? A: RC0805JR-076M2L incorporates moisture-resistant construction. This feature is beneficial in high-humidity environments or applications with extended storage periods. Standard thick film parts (RMC1/10-625JTP, RMCF0805JT6M20) carry MSL 1 (Unlimited) rating, indicating no moisture sensitivity restrictions.

Q: Do all substitutes maintain ROHS3 compliance? A: RMCF0805JT6M20, KTR10EZPF6204, RC0805JR-076M2L, and RMCF0805FT6M20 are ROHS3 compliant. The original RMC1/10-625JTP does not specify RoHS status. For applications requiring ROHS3 compliance, use one of the listed substitutes.

Q: Can I use KTR10EZPF6204 as a direct replacement without circuit modification? A: Yes, with consideration for enhanced specifications. KTR10EZPF6204 maintains 6.2 MOhms resistance, 0.125W power rating, 0805 package, and -55°C ~ 155°C operating range. The ±1% tolerance and ±100ppm/°C temperature coefficient represent improvements that do not require circuit redesign. High voltage rating provides additional margin in high-voltage applications.