RMC1/10-565JTP Equivalent & Substitute Parts

Part Overview

The RMC1/10-565JTP is a 5.6 MOhms ±5% thick film chip resistor manufactured by Kamaya Inc. in the 0805 (2012 Metric) package format. This component is rated for 0.125W (1/8W) power dissipation with an operating temperature range of -55°C to 155°C. The part is currently in active production status with 994 units available in stock. Substitute parts are identified when equivalent electrical specifications and mechanical compatibility are required due to supply constraints, design optimization, or application-specific requirements.

Substiute Parts

RMC1/10-565JTP

Kamaya Inc.In Stock: 1063RMC1/10-565JTP Datasheet

Current PartRFQ

RMCF0805JT5M60

Stackpole Electronics IncIn Stock: 2879RMCF0805JT5M60 Datasheet

DirectRFQ

KTR10EZPF5604

Rohm SemiconductorIn Stock: 3553KTR10EZPF5604 Datasheet

UpgradeRFQ

RC0805JR-075M6L

YAGEOIn Stock: 9626RC0805JR-075M6L Datasheet

UpgradeRFQ

RMCF0805FT5M60

Stackpole Electronics IncIn Stock: 7971RMCF0805FT5M60 Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the RMC1/10-565JTP is determined by strict adherence to the following electrical and mechanical parameters:

Primary Substitution Criteria:

• Resistance value: 5.6 MOhms (exact match required)
• Package / Case: 0805 (2012 Metric) (exact match required)
• Power rating: 0.125W minimum
• Composition: Thick Film
• Operating temperature range: -55°C to 155°C minimum
• Moisture Sensitivity Level: MSL 1 or better
• Number of terminations: 2

Secondary Compatibility Parameters:

• Tolerance: ±5% or tighter
• Temperature coefficient: ±200ppm/°C or better
• Physical dimensions: Compatible with 0805 footprint specifications

Substitute parts are classified into two categories: Direct Substitutes (matching all primary criteria with identical tolerance) and Upgrade Substitutes (enhanced specifications such as tighter tolerance or automotive qualification).

Parameter Comparison

Engineering Selection Recommendations

Direct Substitute (Equivalent Specification):

RMCF0805JT5M60 (Stackpole Electronics Inc) is a direct substitute for the RMC1/10-565JTP. This part maintains identical electrical specifications (5.6 MOhms ±5%, 0.125W, ±200ppm/°C) and mechanical compatibility (0805 package, 2.00mm x 1.25mm dimensions). The RMCF0805JT5M60 carries AEC-Q200 automotive qualification and ROHS3 compliance, providing enhanced supply availability (2827 units in stock) compared to the original part.

Upgrade Substitutes (Enhanced Specifications):

KTR10EZPF5604 (Rohm Semiconductor) and RMCF0805FT5M60 (Stackpole Electronics Inc) are upgrade substitutes offering tighter tolerance (±1% versus ±5%) and improved temperature coefficient (±100ppm/°C versus ±200ppm/°C). Both parts maintain the 0805 package format, 0.125W power rating, and -55°C to 155°C operating range. Both carry AEC-Q200 automotive qualification and ROHS3 compliance. The KTR10EZPF5604 includes high voltage capability. These upgrades are suitable for applications requiring enhanced precision and stability.

RC0805JR-075M6L (YAGEO) is an upgrade substitute with ±5% tolerance matching the original specification but featuring improved temperature coefficient (±100ppm/°C) and moisture-resistant construction. This part maintains full 0805 package compatibility with a maximum seated height of 0.024" (0.60mm), which is 0.002" lower than the original specification. ROHS3 compliance and high inventory availability (9616 units) support supply chain flexibility.

All substitute parts are active production components with REACH compliance and MSL 1 rating, ensuring long-term availability and environmental compatibility.

Frequently Asked Questions (FAQ)

Q: Can RMCF0805JT5M60 be used as a direct replacement for RMC1/10-565JTP?

A: Yes. The RMCF0805JT5M60 maintains identical electrical specifications (5.6 MOhms ±5%, 0.125W, ±200ppm/°C temperature coefficient) and mechanical compatibility (0805 package, 2.00mm x 1.25mm footprint). Both parts operate across -55°C to 155°C and carry MSL 1 rating. The primary difference is the addition of AEC-Q200 automotive qualification on the Stackpole part.

Q: What is the difference between direct substitutes and upgrade substitutes?

A: Direct substitutes match all electrical and mechanical specifications of the original part. RMCF0805JT5M60 is a direct substitute. Upgrade substitutes enhance one or more specifications while maintaining package and footprint compatibility. KTR10EZPF5604 and RMCF0805FT5M60 offer ±1% tolerance and ±100ppm/°C temperature coefficient compared to the original ±5% tolerance and ±200ppm/°C coefficient. RC0805JR-075M6L offers improved temperature coefficient with moisture-resistant construction.

Q: Are all substitute parts compatible with the 0805 footprint?

A: Yes. All substitute parts use the 0805 (2012 Metric) package format with 2.00mm length and 1.25mm width. RC0805JR-075M6L has a maximum seated height of 0.024" (0.60mm), which is 0.002" lower than other parts rated at 0.026" (0.65mm). This minor height difference does not affect PCB footprint compatibility but should be verified for applications with strict height constraints.

Q: Which substitute offers the best supply availability?

A: RC0805JR-075M6L (YAGEO) has the highest inventory with 9616 units in stock, followed by RMCF0805FT5M60 (7877 units) and KTR10EZPF5604 (3534 units). RMCF0805JT5M60 has 2827 units available.

Q: Do all substitutes meet automotive qualification requirements?

A: RMCF0805JT5M60, KTR10EZPF5604, and RMCF0805FT5M60 carry AEC-Q200 automotive qualification. RC0805JR-075M6L and the original RMC1/10-565JTP do not have automotive ratings. For automotive applications, select from the three AEC-Q200 qualified parts.

Q: What is the significance of the ±1% tolerance upgrade?

A: KTR10EZPF5604 and RMCF0805FT5M60 provide ±1% tolerance compared to the original ±5%. This tighter tolerance reduces resistance variation across production batches, improving circuit performance in applications requiring precise impedance matching or gain accuracy. The original ±5% tolerance is acceptable for general-purpose applications.

Q: Are all substitute parts RoHS compliant?

A: All substitute parts are ROHS3 compliant. The original RMC1/10-565JTP RoHS status is not specified in the provided data. All parts carry REACH compliance and are unaffected by REACH regulations.

Q: What does MSL 1 rating mean for these resistors?

A: MSL 1 (Moisture Sensitivity Level 1) indicates unlimited shelf life without moisture baking requirements. All parts, including the original and all substitutes, carry MSL 1 rating, ensuring no special storage or handling procedures are necessary.