RMC1/10-475JTP Equivalent & Substitute Parts

Part Overview

The RMC1/10-475JTP is a 4.7 MOhms ±5% 0.125W thick film chip resistor in 0805 (2012 Metric) package manufactured by Kamaya Inc. This component is classified as Active product status with 910 pieces currently in stock. Substitute parts are identified based on matching electrical specifications, mechanical dimensions, and package compatibility to ensure direct functional equivalence in circuit applications.

Substiute Parts

RMC1/10-475JTP

Kamaya Inc.In Stock: 939RMC1/10-475JTP Datasheet

Current PartRFQ

RMCF0805JT4M70

Stackpole Electronics IncIn Stock: 104849RMCF0805JT4M70 Datasheet

DirectRFQ

KTR10EZPF4704

Rohm SemiconductorIn Stock: 27318KTR10EZPF4704 Datasheet

UpgradeRFQ

RC0805FR-074M7L

YAGEOIn Stock: 41947RC0805FR-074M7L Datasheet

UpgradeRFQ

RC0805JR-074M7L

YAGEOIn Stock: 86694RC0805JR-074M7L Datasheet

UpgradeRFQ

RMCF0805FT4M70

Stackpole Electronics IncIn Stock: 16336RMCF0805FT4M70 Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the RMC1/10-475JTP are grouped into two categories based on tolerance specifications:

Direct Equivalents (±5% Tolerance): Parts maintaining identical tolerance to the main part. These substitutes provide functional equivalence without tolerance upgrades.

Upgraded Alternatives (±1% Tolerance): Parts offering improved tolerance performance. These substitutes provide tighter tolerance specifications while maintaining all other electrical and mechanical parameters.

All substitute parts share the following critical parameters with the main part:

• Resistance value: 4.7 MOhms
• Power rating: 0.125W (1/8W)
• Package: 0805 (2012 Metric)
• Composition: Thick Film
• Operating temperature range: -55°C ~ 155°C
• Moisture Sensitivity Level: MSL 1 (Unlimited)
• Physical dimensions: 0.079" L x 0.049" W (2.00mm x 1.25mm)

Parameter Comparison

Engineering Selection Recommendations

Direct Equivalent Selection (±5% Tolerance):

RMCF0805JT4M70 (Stackpole Electronics Inc) serves as the primary direct equivalent. This part maintains ±5% tolerance matching the RMC1/10-475JTP while adding Automotive AEC-Q200 certification. Inventory availability is significantly higher at 104,825 pieces.

RC0805JR-074M7L (YAGEO) provides an alternative direct equivalent with ±5% tolerance and Moisture Resistant features. This part is available in Cut Tape (CT) & Digi-Reel® packaging format with 86,663 pieces in stock.

Upgraded Tolerance Selection (±1% Tolerance):

KTR10EZPF4704 (Rohm Semiconductor) offers ±1% tolerance with Automotive AEC-Q200 and High Voltage features. Temperature coefficient improves to ±100ppm/°C.

RC0805FR-074M7L (YAGEO) provides ±1% tolerance with Moisture Resistant features and improved temperature coefficient of ±100ppm/°C.

RMCF0805FT4M70 (Stackpole Electronics Inc) delivers ±1% tolerance with Automotive AEC-Q200 certification while maintaining ±200ppm/°C temperature coefficient.

All substitute parts maintain ROHS3 compliance, REACH Unaffected status, and MSL 1 rating identical to the main part.

Frequently Asked Questions (FAQ)

Q: Can RMCF0805JT4M70 replace RMC1/10-475JTP directly?

A: Yes. RMCF0805JT4M70 maintains identical electrical specifications (4.7 MOhms ±5%, 0.125W) and mechanical package (0805). The addition of Automotive AEC-Q200 certification does not prevent direct substitution in non-automotive applications.

Q: What is the difference between ±5% and ±1% tolerance substitutes?

A: Tolerance defines the acceptable resistance variation from the nominal 4.7 MOhms value. ±5% tolerance allows variation between 4.465 MOhms and 4.935 MOhms. ±1% tolerance restricts variation to 4.653 MOhms and 4.747 MOhms. Applications requiring tighter tolerance specifications must use ±1% alternatives.

Q: Are packaging format differences significant?

A: Packaging format (Tape & Reel vs. Cut Tape & Digi-Reel) affects handling and assembly processes but does not impact electrical or mechanical compatibility. Component selection should consider manufacturing line requirements.

Q: Does Automotive AEC-Q200 certification affect non-automotive applications?

A: No. AEC-Q200 certification indicates the part meets automotive reliability standards. Parts with this certification function identically in non-automotive circuits and provide additional quality assurance.

Q: What is the significance of temperature coefficient differences?

A: Temperature coefficient (±200ppm/°C vs. ±100ppm/°C) indicates resistance change per degree Celsius. Lower values indicate better stability across temperature ranges. Applications operating across wide temperature ranges benefit from lower temperature coefficients.

Q: Can moisture-resistant variants be used in standard applications?

A: Yes. Moisture-resistant features provide enhanced protection in humid environments but do not restrict use in standard conditions. All parts maintain MSL 1 (Unlimited) rating.