RMC1/10-430JTP Equivalent & Substitute Parts Reference

Part Overview

The RMC1/10-430JTP is a 43 Ohm ±5% thick film chip resistor rated at 0.125W (1/8W) in 0805 (2012 Metric) surface mount package, manufactured by Kamaya Inc. This component is currently Active in product status with 712 pieces in stock. The RMC1/10-430JTP serves as a general-purpose resistor element in consumer and industrial electronic assemblies where standard tolerance and power ratings are acceptable. Equivalent and substitute parts are identified to provide design flexibility, supply chain alternatives, and performance upgrades when required by application specifications or availability constraints.

Key Parameters

Parameter	Value	Significance for Substitution
Resistance Value	43 Ohms	Must match exactly for direct substitution
Tolerance	±5%	Defines acceptable resistance variance; tighter tolerances (±1%) are upgrades
Power Rating	0.125W (1/8W)	Must match or exceed for thermal compatibility
Package / Case	0805 (2012 Metric)	Physical footprint; must match for PCB compatibility
Composition	Thick Film	Determines electrical characteristics and temperature behavior
Temperature Coefficient	±200ppm/°C (standard); ±100ppm/°C (upgraded)	Affects resistance stability across operating temperature range
Operating Temperature Range	-55°C to 155°C	Must support application environment
Moisture Sensitivity Level (MSL)	1 (Unlimited)	Indicates no moisture sensitivity restrictions
RoHS Status	ROHS3 Compliant	Environmental and regulatory compliance requirement

Substitute Part Grouping Explanation

Substitute parts for the RMC1/10-430JTP are classified into two categories based on electrical and mechanical compatibility:

Direct Equivalents (Same Tolerance ±5%)

Direct equivalent parts maintain identical electrical specifications: 43 Ohms resistance, ±5% tolerance, 0.125W power rating, ±200ppm/°C temperature coefficient, and 0805 package. These parts are interchangeable without circuit redesign or performance impact. Direct equivalents include ERJ-6GEYJ430V (Panasonic), MCR10ERTJ430 (Rohm), RMCF0805JT43R0 (Stackpole), and RC0805JR-0743RL (YAGEO).

Upgraded Versions (Tighter Tolerance ±1%)

Upgraded parts provide superior tolerance performance at ±1% with reduced temperature coefficient (±100ppm/°C), enabling use in precision applications. These parts maintain the same 43 Ohm resistance, 0.125W power rating, 0805 package, and -55°C to 155°C operating range. Upgraded versions include ERJ-6ENF43R0V (Panasonic), MCR10ERTF43R0 (Rohm), RC0805FR-0743RL (YAGEO), and RMCF0805FT43R0 (Stackpole).

Substitution Criteria

All substitute parts meet the following mandatory criteria:

Resistance value: 43 Ohms
Package: 0805 (2012 Metric)
Power rating: 0.125W minimum
Composition: Thick Film
Operating temperature: -55°C to 155°C minimum
Moisture sensitivity: MSL 1 (Unlimited)
RoHS compliance: ROHS3 Compliant
Termination count: 2

Parameter Comparison

Part Number	Manufacturer	Resistance	Tolerance	Power (W)	Temp Coeff (ppm/°C)	Package	Product Status	Features
RMC1/10-430JTP	Kamaya Inc.	43 Ω	±5%	0.125	±200	0805	Active	Standard
ERJ-6GEYJ430V	Panasonic	43 Ω	±5%	0.125	±200	0805	Active	Automotive AEC-Q200
MCR10ERTJ430	Rohm Semiconductor	43 Ω	±5%	0.125	±200	0805	Discontinued at DiGi Electronics	Standard
RMCF0805JT43R0	Stackpole Electronics	43 Ω	±5%	0.125	±200	0805	Active	Automotive AEC-Q200
RC0805JR-0743RL	YAGEO	43 Ω	±5%	0.125	±100	0805	Active	Moisture Resistant
ERJ-6ENF43R0V	Panasonic	43 Ω	±1%	0.125	±100	0805	Active	Automotive AEC-Q200
MCR10ERTF43R0	Rohm Semiconductor	43 Ω	±1%	0.125	±100	0805	Discontinued at DiGi Electronics	Standard
RC0805FR-0743RL	YAGEO	43 Ω	±1%	0.125	±100	0805	Active	Moisture Resistant
RMCF0805FT43R0	Stackpole Electronics	43 Ω	±1%	0.125	±100	0805	Active	Automotive AEC-Q200

Engineering Selection Recommendations

For Direct Replacement (Same Specifications)

Select ERJ-6GEYJ430V, RMCF0805JT43R0, or RC0805JR-0743RL when direct substitution is required. ERJ-6GEYJ430V (Panasonic, 22,639 units in stock) and RMCF0805JT43R0 (Stackpole, 4,363 units in stock) are both Active products with Automotive AEC-Q200 certification, providing enhanced reliability for demanding applications. RC0805JR-0743RL (YAGEO, 5,342 units in stock) offers moisture-resistant construction and is Active in product status. MCR10ERTJ430 (Rohm, 5,255 units in stock) is functionally equivalent but discontinued at DiGi Electronics, limiting long-term availability.

For Precision Applications (±1% Tolerance)

Select RMCF0805FT43R0, ERJ-6ENF43R0V, or RC0805FR-0743RL when tighter tolerance and lower temperature coefficient are required. RMCF0805FT43R0 (Stackpole, 917 units in stock) and ERJ-6ENF43R0V (Panasonic, 53,023 units in stock) both carry Automotive AEC-Q200 certification with ±100ppm/°C temperature coefficient. RC0805FR-0743RL (YAGEO, 1,197 units in stock) provides moisture-resistant thick film construction with equivalent electrical performance. MCR10ERTF43R0 (Rohm, 2,390 units in stock) is discontinued at DiGi Electronics.

Compliance and Certification Considerations

All substitute parts are ROHS3 Compliant and REACH Unaffected. Parts designated with Automotive AEC-Q200 certification (ERJ-6GEYJ430V, RMCF0805JT43R0, ERJ-6ENF43R0V, RMCF0805FT43R0) meet automotive-grade reliability standards and are suitable for automotive, industrial, and high-reliability applications. Parts with moisture-resistant features (RC0805JR-0743RL, RC0805FR-0743RL) are suitable for humid or corrosive environments.

Frequently Asked Questions (FAQ)

Q: Can I use a ±1% tolerance part as a direct replacement for the ±5% RMC1/10-430JTP?

A: Yes. A ±1% tolerance part is a functional upgrade that maintains the same 43 Ohm resistance and 0.125W power rating while providing superior tolerance performance. The tighter tolerance does not create compatibility issues; it only improves circuit accuracy. Upgraded parts include ERJ-6ENF43R0V, MCR10ERTF43R0, RC0805FR-0743RL, and RMCF0805FT43R0.

Q: What is the difference between standard and Automotive AEC-Q200 versions?

A: Automotive AEC-Q200 certification indicates the part meets automotive-grade reliability and qualification standards. These parts undergo additional testing and quality assurance. Standard versions (MCR10ERTJ430, MCR10ERTF43R0) do not carry this certification. For automotive, medical, or high-reliability applications, select AEC-Q200 certified parts: ERJ-6GEYJ430V, RMCF0805JT43R0, ERJ-6ENF43R0V, or RMCF0805FT43R0.

Q: Are all substitute parts available in the same packaging format?

A: Most substitute parts are supplied in Tape & Reel (TR) packaging, matching the RMC1/10-430JTP. MCR10ERTJ430 and MCR10ERTF43R0 (Rohm) are supplied in Cut Tape (CT) & Digi-Reel® format. Verify packaging requirements with your procurement process before selection.

Q: What is the significance of temperature coefficient differences?

A: The RMC1/10-430JTP has a temperature coefficient of ±200ppm/°C, meaning resistance changes by up to 200 parts per million for each degree Celsius change. Upgraded parts with ±100ppm/°C provide half the resistance drift across the -55°C to 155°C operating range, improving circuit stability in temperature-sensitive applications. Standard tolerance parts (±5%) are adequate for most applications; precision applications benefit from upgraded versions.

Q: Can I substitute parts with different height specifications?

A: The RMC1/10-430JTP has a maximum seated height of 0.026" (0.65mm). Most substitute parts maintain this height, except ERJ-6GEYJ430V and ERJ-6ENF43R0V (Panasonic), which have a maximum seated height of 0.028" (0.70mm). This 0.002" difference is negligible for standard PCB assembly but should be verified if height clearance is critical in your design.

Q: What does Moisture Sensitivity Level (MSL) 1 mean?

A: MSL 1 (Unlimited) indicates the component has no moisture sensitivity restrictions. The part does not require special dry-pack storage or handling procedures. All substitute parts listed maintain MSL 1 classification, ensuring consistent handling requirements across the supply chain.

Q: Which substitute part offers the best inventory availability?

A: ERJ-6ENF43R0V (Panasonic) offers the highest inventory with 53,023 units in stock. For direct equivalents at ±5% tolerance, ERJ-6GEYJ430V (Panasonic, 22,639 units) provides the largest available quantity. RC0805JR-0743RL (YAGEO, 5,342 units) and MCR10ERTJ430 (Rohm, 5,255 units) are also well-stocked alternatives.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message