RMC1/10-2R00FTP Equivalent & Substitute Parts

Part Overview

The RMC1/10-2R00FTP is a 2 Ohm ±1% 1/8W chip resistor manufactured by Kamaya Inc. in 0805 (2012 Metric) package format. This thick film resistor operates across -55°C to 155°C and is supplied in Tape & Reel packaging. The part maintains Active product status with 823 units currently in stock. Equivalent and substitute parts are identified to support procurement flexibility, supply chain continuity, and application-specific requirements such as automotive qualification or enhanced moisture resistance.

Substiute Parts

RMC1/10-2R00FTP

Kamaya Inc.In Stock: 861RMC1/10-2R00FTP Datasheet

Current PartRFQ

RC0805FR-072RL

YAGEOIn Stock: 357315RC0805FR-072RL Datasheet

UpgradeRFQ

RMCF0805FT2R00

Stackpole Electronics IncIn Stock: 105794RMCF0805FT2R00 Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the RMC1/10-2R00FTP is determined by strict equivalence across the following parameters:

Critical Matching Parameters:

• Resistance value: 2 Ohms
• Tolerance: ±1%
• Power rating: 0.125W (1/8W)
• Package: 0805 (2012 Metric)
• Composition: Thick Film
• Operating temperature range: -55°C ~ 155°C
• Termination count: 2
• MSL rating: 1 (Unlimited)

Allowed Variation Parameters:

• Temperature coefficient (within specified range)
• Height seated maximum (within mechanical constraints)
• Packaging format (Tape & Reel, Cut Tape, Digi-Reel)
• Manufacturer-specific features (moisture resistance, automotive qualification)
• RoHS compliance status

The identified substitute parts RC0805FR-072RL and RMCF0805FT2R00 meet all critical matching parameters and are therefore electrically and mechanically interchangeable with the RMC1/10-2R00FTP.

Parameter Comparison

Engineering Selection Recommendations

RC0805FR-072RL (YAGEO): This substitute is suitable for applications requiring enhanced moisture resistance. The part carries ROHS3 compliance and maintains identical electrical specifications. The temperature coefficient of ±200ppm/°C is tighter than the RMC1/10-2R00FTP, providing improved stability across the operating range. Height seated maximum is 0.024" (0.60mm), which is 0.002" lower than the main part and compatible with standard PCB assembly processes. Available packaging includes Cut Tape and Digi-Reel formats.

RMCF0805FT2R00 (Stackpole Electronics Inc): This substitute is qualified to AEC-Q200 automotive standards and carries ROHS3 compliance. The part is suitable for automotive and high-reliability applications. Electrical specifications are identical to the main part, with temperature coefficient of ±200ppm/°C. Height seated maximum matches the RMC1/10-2R00FTP at 0.026" (0.65mm). Supplied in Tape & Reel packaging consistent with the main part format.

Both substitutes are electrically and mechanically interchangeable with the RMC1/10-2R00FTP. Selection between them depends on application-specific requirements: moisture-resistant environments favor RC0805FR-072RL, while automotive applications favor RMCF0805FT2R00.

Frequently Asked Questions (FAQ)

Q: Can RC0805FR-072RL be used as a direct replacement for RMC1/10-2R00FTP?

A: Yes. Both parts share identical resistance (2 Ohms), tolerance (±1%), power rating (0.125W), package (0805), composition (thick film), operating temperature range (-55°C ~ 155°C), and MSL rating (1). The RC0805FR-072RL features moisture resistance and ROHS3 compliance as additional benefits. Height seated maximum differs by 0.002" (0.60mm vs 0.65mm), which is within standard PCB assembly tolerances.

Q: Can RMCF0805FT2R00 be used as a direct replacement for RMC1/10-2R00FTP?

A: Yes. Both parts are electrically and mechanically equivalent across all critical parameters: resistance, tolerance, power rating, package, composition, and operating temperature. RMCF0805FT2R00 adds AEC-Q200 automotive qualification and ROHS3 compliance. Height seated maximum is identical at 0.026" (0.65mm).

Q: What is the difference in temperature coefficient between these parts?

A: The RMC1/10-2R00FTP specifies -200 / +500ppm/°C, indicating asymmetrical behavior across temperature extremes. Both RC0805FR-072RL and RMCF0805FT2R00 specify ±200ppm/°C, representing symmetrical and tighter tolerance across the operating range. This difference does not affect interchangeability but may impact precision applications requiring predictable temperature behavior.

Q: Are packaging format differences significant for substitution?

A: Packaging format differences (Tape & Reel vs Cut Tape vs Digi-Reel) affect procurement and assembly logistics but do not impact electrical or mechanical compatibility. All three parts are supplied in standard industry formats compatible with automated pick-and-place equipment.

Q: Do all three parts meet REACH and RoHS requirements?

A: All three parts carry REACH Unaffected status. RC0805FR-072RL and RMCF0805FT2R00 are explicitly ROHS3 compliant. RMC1/10-2R00FTP RoHS status is not specified in available documentation.

Q: Which substitute should be selected for high-reliability applications?

A: RMCF0805FT2R00 is qualified to AEC-Q200 automotive standards, making it suitable for high-reliability and automotive applications. RC0805FR-072RL is suitable for general industrial and consumer applications requiring moisture resistance.