Equivalent & Substitute Parts for RMC1/10-2002FTP

Part Overview

The RMC1/10-2002FTP is a 20 kOhms ±1% 0.125W thick film chip resistor in 0805 (2012 Metric) package manufactured by Kamaya Inc. This component is classified as Active and is available in Tape & Reel packaging. The RMC series represents a standard general-purpose resistor line suitable for consumer and industrial applications. Substitute parts are necessary when the primary part becomes unavailable, when alternative manufacturers offer improved lead times, or when application-specific certifications such as automotive qualification are required.

Key Parameters

Parameter	Value
Resistance	20 kOhms
Tolerance	±1%
Power Rating	0.125W (1/8W)
Package / Case	0805 (2012 Metric)
Composition	Thick Film
Temperature Coefficient	±100ppm/°C
Operating Temperature Range	-55°C ~ 155°C
Moisture Sensitivity Level	1 (Unlimited)
Number of Terminations	2
Size / Dimension	0.079" L x 0.049" W (2.00mm x 1.25mm)
Height - Seated (Max)	0.026" (0.65mm)

Substitute Part Grouping Explanation

Substitution of the RMC1/10-2002FTP is determined by strict equivalence across the following parameters:

Critical Substitution Parameters:

Resistance value: 20 kOhms
Tolerance: ±1%
Power rating: 0.125W (1/8W)
Package: 0805 (2012 Metric)
Composition: Thick Film
Temperature coefficient: ±100ppm/°C
Operating temperature range: -55°C ~ 155°C
Moisture sensitivity level: 1 (Unlimited)
Number of terminations: 2

All identified substitute parts match these parameters exactly. Substitute parts are grouped into two categories based on product status and application-specific certifications:

Category 1: General-Purpose Equivalents (Active Status)

CRG0805F20K (TE Connectivity Passive Product)

Category 2: Automotive-Qualified Equivalents (Active Status)

KTR10EZPF2002 (Rohm Semiconductor) - AEC-Q200, High Voltage
RMCF0805FG20K0 (Stackpole Electronics Inc) - AEC-Q200
RMCF0805FT20K0 (Stackpole Electronics Inc) - AEC-Q200
RMEF0805FT20K0 (Stackpole Electronics Inc) - AEC-Q200
SFR10EZPF2002 (Rohm Semiconductor) - AEC-Q200, Anti-Sulfur

Category 3: Obsolete Status (Not Recommended for New Designs)

TRR10EZPF2002 (Rohm Semiconductor) - Anti-Sulfur, Obsolete

Parameter Comparison

Manufacturer Part Number	Manufacturer	Resistance	Tolerance	Power (Watts)	Package / Case	Composition	Temperature Coefficient	Operating Temperature	Product Status	Packaging Type	RoHS Status	MSL
RMC1/10-2002FTP	Kamaya Inc.	20 kOhms	±1%	0.125W	0805 (2012 Metric)	Thick Film	±100ppm/°C	-55°C ~ 155°C	Active	Tape & Reel (TR)	REACH Unaffected	1
CRG0805F20K	TE Connectivity Passive Product	20 kOhms	±1%	0.125W	0805 (2012 Metric)	Thick Film	±100ppm/°C	-55°C ~ 155°C	Active	Tape & Reel (TR)	ROHS3 Compliant	1
KTR10EZPF2002	Rohm Semiconductor	20 kOhms	±1%	0.125W	0805 (2012 Metric)	Thick Film	±100ppm/°C	-55°C ~ 155°C	Active	Tape & Reel (TR)	ROHS3 Compliant	1
RMCF0805FG20K0	Stackpole Electronics Inc	20 kOhms	±1%	0.125W	0805 (2012 Metric)	Thick Film	±100ppm/°C	-55°C ~ 155°C	Active	Tape & Reel (TR)	ROHS3 Compliant	1
RMCF0805FT20K0	Stackpole Electronics Inc	20 kOhms	±1%	0.125W	0805 (2012 Metric)	Thick Film	±100ppm/°C	-55°C ~ 155°C	Active	Cut Tape (CT) & Digi-Reel®	ROHS3 Compliant	1
RMEF0805FT20K0	Stackpole Electronics Inc	20 kOhms	±1%	0.125W	0805 (2012 Metric)	Thick Film	±100ppm/°C	-55°C ~ 155°C	Active	Tape & Reel (TR)	ROHS3 Compliant	1
SFR10EZPF2002	Rohm Semiconductor	20 kOhms	±1%	0.125W	0805 (2012 Metric)	Thick Film	±100ppm/°C	-55°C ~ 155°C	Active	Tape & Reel (TR)	Not Specified	1
TRR10EZPF2002	Rohm Semiconductor	20 kOhms	±1%	0.125W	0805 (2012 Metric)	Thick Film	±100ppm/°C	-55°C ~ 155°C	Obsolete	Tape & Reel (TR)	ROHS3 Compliant	1

Engineering Selection Recommendations

For General-Purpose Applications: CRG0805F20K (TE Connectivity Passive Product) is a direct parametric equivalent suitable for non-automotive applications. This part maintains Active product status and ROHS3 compliance.

For Automotive Applications: KTR10EZPF2002, RMCF0805FG20K0, RMCF0805FT20K0, RMEF0805FT20K0, and SFR10EZPF2002 are all qualified to AEC-Q200 automotive standards. Selection among these automotive-qualified options depends on packaging requirements and specific environmental conditions:

KTR10EZPF2002 includes High Voltage rating in addition to AEC-Q200 qualification
SFR10EZPF2002 includes Anti-Sulfur feature for enhanced environmental resistance
RMEF0805FT20K0 carries explicit 7C1 RoHS without Exemption (100% Pb-Free) rating
RMCF0805FT20K0 is available in Cut Tape (CT) & Digi-Reel® packaging for alternative supply chain options

Obsolete Parts: TRR10EZPF2002 is classified as Obsolete and is not recommended for new design implementations. Existing inventory may be available but future supply cannot be assured.

Frequently Asked Questions (FAQ)

Q: Can CRG0805F20K be used as a direct replacement for RMC1/10-2002FTP?

A: Yes. CRG0805F20K is a parametric equivalent with identical electrical specifications (20 kOhms ±1%, 0.125W, ±100ppm/°C, -55°C ~ 155°C operating range) and identical package dimensions (0805 / 2012 Metric). Both parts are Active status and MSL 1. The primary difference is manufacturer (TE Connectivity vs. Kamaya Inc.).

Q: What is the difference between automotive-qualified and general-purpose versions?

A: Automotive-qualified parts (KTR10EZPF2002, RMCF series, SFR10EZPF2002) carry AEC-Q200 certification, indicating compliance with automotive reliability and quality standards. These parts are suitable for automotive and high-reliability applications. General-purpose parts (CRG0805F20K) lack this certification and are intended for consumer and industrial applications without automotive requirements.

Q: Can I use TRR10EZPF2002 in a new design?

A: No. TRR10EZPF2002 is classified as Obsolete. While inventory may currently be available, future supply cannot be assured. New designs should use Active status parts such as KTR10EZPF2002, RMCF series, or SFR10EZPF2002 for automotive applications, or CRG0805F20K for general-purpose applications.

Q: What is the difference between RMCF0805FT20K0 and RMCF0805FG20K0?

A: Both parts are manufactured by Stackpole Electronics Inc with identical electrical specifications and AEC-Q200 qualification. The primary difference is packaging: RMCF0805FT20K0 is supplied in Cut Tape (CT) & Digi-Reel® format, while RMCF0805FG20K0 is supplied in standard Tape & Reel (TR) format. Selection depends on assembly line requirements and supply chain preferences.

Q: Are all substitute parts RoHS compliant?

A: All substitute parts except SFR10EZPF2002 explicitly specify ROHS3 compliance. SFR10EZPF2002 does not specify RoHS status in the provided data. For applications requiring confirmed RoHS compliance, use CRG0805F20K, KTR10EZPF2002, RMCF0805FG20K0, RMCF0805FT20K0, RMEF0805FT20K0, or TRR10EZPF2002.

Q: What does MSL 1 (Unlimited) mean?

A: Moisture Sensitivity Level 1 (Unlimited) indicates that the component has no moisture sensitivity restrictions. These parts do not require special moisture control during storage, handling, or assembly, and have unlimited shelf life under normal conditions.

Q: Can I mix different manufacturers' parts in the same assembly?

A: Yes. All substitute parts meet identical electrical and mechanical specifications. Mixing manufacturers in the same assembly is permissible from an electrical standpoint. However, procurement and quality assurance procedures should account for manufacturer-specific documentation and certifications.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message