RMC1/10-1005FTP Equivalent & Substitute Parts

Part Overview

The RMC1/10-1005FTP is a 10 MOhms ±1% 0.125W thick film chip resistor in 0805 (2012 Metric) package manufactured by Kamaya Inc. This component is classified as Active status and is suitable for general-purpose high-impedance applications requiring precision tolerance and compact form factor. Substitute parts are identified to address supply chain continuity, alternative sourcing options, and specific application requirements such as automotive qualification or enhanced environmental performance.

Substiute Parts

RMC1/10-1005FTP

Kamaya Inc.In Stock: 931RMC1/10-1005FTP Datasheet

Current PartRFQ

RMCF0805FT10M0

Stackpole Electronics IncIn Stock: 5038RMCF0805FT10M0 Datasheet

DirectRFQ

KTR10EZPF1005

Rohm SemiconductorIn Stock: 185763KTR10EZPF1005 Datasheet

UpgradeRFQ

RC0805FR-0710ML

YAGEOIn Stock: 116169RC0805FR-0710ML Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility is determined by strict equivalence across the following parameters:

Critical Matching Parameters:

• Resistance value: 10 MOhms (exact match required)
• Tolerance: ±1% (exact match required)
• Power rating: 0.125W minimum (equal or higher acceptable)
• Package: 0805 (2012 Metric) (exact match required)
• Composition: Thick Film (exact match required)
• Operating temperature range: -55°C ~ 155°C (equal or wider range acceptable)
• Number of terminations: 2 (exact match required)

Acceptable Variations:

• Temperature coefficient: ±200ppm/°C or better (lower values represent improved stability)
• Packaging format: Tape & Reel or Cut Tape formats are interchangeable for component functionality
• Certifications and features: Additional qualifications (AEC-Q200, moisture resistance) do not prevent substitution but may enhance suitability for specific applications

All identified substitute parts meet these criteria and are therefore direct functional equivalents to the RMC1/10-1005FTP.

Parameter Comparison

Engineering Selection Recommendations

RMCF0805FT10M0 (Stackpole Electronics Inc): This part is a direct functional equivalent with identical electrical specifications to the RMC1/10-1005FTP. The addition of AEC-Q200 automotive qualification provides enhanced reliability documentation for applications requiring automotive-grade components. Product status is Active with substantial inventory availability (4986 Pcs). This substitute is suitable for general-purpose applications and automotive environments.

KTR10EZPF1005 (Rohm Semiconductor): This part meets all functional requirements with improved temperature coefficient performance (±100ppm/°C versus ±200ppm/°C), resulting in superior stability across the operating temperature range. AEC-Q200 automotive qualification and High Voltage designation are included. Highest inventory availability (185708 Pcs) supports supply chain continuity. This substitute is recommended for applications requiring enhanced temperature stability and automotive compliance.

RC0805FR-0710ML (YAGEO): This part is functionally equivalent with improved temperature coefficient (±100ppm/°C) and moisture-resistant features. Packaging is provided in Cut Tape and Digi-Reel format rather than standard Tape & Reel. Seated height is marginally reduced (0.024" versus 0.026"), which may provide benefits in space-constrained PCB layouts. RoHS3 compliance is confirmed. This substitute is suitable for applications requiring moisture resistance and compact form factor optimization.

All three substitute parts are Active status components with confirmed inventory availability and are suitable for direct replacement based on electrical and mechanical parameter equivalence.

Frequently Asked Questions (FAQ)

Q: Can RMCF0805FT10M0 be used as a direct replacement for RMC1/10-1005FTP?

A: Yes. Both components share identical resistance value (10 MOhms), tolerance (±1%), power rating (0.125W), package (0805), composition (Thick Film), and operating temperature range (-55°C ~ 155°C). The addition of AEC-Q200 qualification in the Stackpole part does not prevent substitution and may provide additional reliability documentation.

Q: What is the difference between the temperature coefficients of these parts?

A: The RMC1/10-1005FTP and RMCF0805FT10M0 have a temperature coefficient of ±200ppm/°C. The KTR10EZPF1005 and RC0805FR-0710ML have a temperature coefficient of ±100ppm/°C. Lower temperature coefficient values indicate better resistance stability across temperature variations. For applications with strict tolerance requirements across temperature extremes, the ±100ppm/°C parts provide superior performance.

Q: Are there packaging format differences between these substitutes?

A: The RMC1/10-1005FTP, RMCF0805FT10M0, and KTR10EZPF1005 are supplied in Tape & Reel (TR) format. The RC0805FR-0710ML is supplied in Cut Tape (CT) and Digi-Reel format. Both formats are compatible with standard pick-and-place assembly equipment. Format selection depends on production volume and assembly line configuration.

Q: Does the height difference between RC0805FR-0710ML (0.024") and other parts (0.026") affect PCB compatibility?

A: The height difference of 0.002" (0.05mm) is within typical PCB design tolerances and does not prevent substitution. However, in space-constrained applications with minimal clearance above the component, the reduced height of the RC0805FR-0710ML may provide design advantages.

Q: Which substitute part should be selected for automotive applications?

A: Both RMCF0805FT10M0 and KTR10EZPF1005 carry AEC-Q200 automotive qualification. The KTR10EZPF1005 additionally features High Voltage designation and improved temperature coefficient (±100ppm/°C), making it suitable for demanding automotive environments requiring enhanced stability.

Q: Are all substitute parts RoHS3 compliant?

A: RMCF0805FT10M0, KTR10EZPF1005, and RC0805FR-0710ML are all confirmed RoHS3 compliant. The RMC1/10-1005FTP RoHS status is not specified in the provided data.

Q: What is the moisture sensitivity level for all these parts?

A: All parts, including the main part and all substitutes, have Moisture Sensitivity Level (MSL) 1, which indicates unlimited shelf life without moisture control requirements.