Equivalent & Substitute Parts for RMC1/10-1003FTP

Part Overview

The RMC1/10-1003FTP is a 100 kOhms ±1% 0.125W thick film chip resistor in 0805 (2012 Metric) package manufactured by Kamaya Inc. This component is classified as Active product status with 628 pieces currently in stock. The RMC1/10-1003FTP serves as a precision resistive element in general-purpose electronic applications requiring stable resistance values across the operating temperature range of -55°C to 155°C. Substitute parts are identified when equivalent electrical specifications, mechanical dimensions, and packaging formats are required due to supply constraints, design flexibility, or application-specific certifications.

Substiute Parts

RMC1/10-1003FTP

Kamaya Inc.In Stock: 649RMC1/10-1003FTP Datasheet

Current PartRFQ

CRG0805F100K

TE Connectivity Passive ProductIn Stock: 170219CRG0805F100K Datasheet

DirectRFQ

ERJ-6ENF1003V

Panasonic Electronic ComponentsIn Stock: 725713ERJ-6ENF1003V Datasheet

DirectRFQ

KTR10EZPF1003

Rohm SemiconductorIn Stock: 157145KTR10EZPF1003 Datasheet

DirectRFQ

RC0805FR-07100KL

YAGEOIn Stock: 2579RC0805FR-07100KL Datasheet

DirectRFQ

RMCF0805FG100K

Stackpole Electronics IncIn Stock: 1097770RMCF0805FG100K Datasheet

DirectRFQ

RMCF0805FT100K

Stackpole Electronics IncIn Stock: 1594638RMCF0805FT100K Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the RMC1/10-1003FTP are qualified based on strict electrical and mechanical parameter matching. The following criteria determine substitution eligibility:

Mandatory Matching Parameters:

• Resistance value: 100 kOhms
• Tolerance: ±1%
• Power rating: 0.125W (1/8W)
• Package: 0805 (2012 Metric)
• Composition: Thick Film
• Temperature coefficient: ±100ppm/°C
• Operating temperature range: -55°C ~ 155°C
• Moisture sensitivity level: 1 (Unlimited)
• Number of terminations: 2

All identified substitute parts meet these mandatory parameters. Substitute parts are further differentiated by manufacturer, series designation, packaging format (Tape & Reel or Cut Tape), and optional certifications such as Automotive AEC-Q200 or moisture-resistant features. These secondary attributes do not affect electrical or mechanical compatibility but may be relevant for specific application requirements.

Parameter Comparison

Engineering Selection Recommendations

All substitute parts listed maintain full electrical and mechanical compatibility with the RMC1/10-1003FTP. Selection among substitute parts should be based on the following factors:

Packaging Format Considerations: Tape & Reel (TR) packaging is suitable for high-volume automated assembly processes. Cut Tape (CT) & Digi-Reel packaging is appropriate for lower-volume applications or when component-level flexibility is required.

Compliance and Certification: Parts designated with Automotive AEC-Q200 certification (ERJ-6ENF1003V, KTR10EZPF1003, RMCF0805FG100K, RMCF0805FT100K) are qualified for automotive applications and meet enhanced reliability standards. These parts are suitable for applications requiring automotive-grade component qualification.

Application-Specific Features: The RC0805FR-07100KL includes moisture-resistant properties, which may be beneficial in high-humidity or corrosive environments. The KTR10EZPF1003 includes high-voltage capability designation in addition to automotive qualification.

Inventory Availability: Substitute parts demonstrate varying inventory levels. RMCF0805FT100K (1,594,544 pcs), RMCF0805FG100K (1,097,662 pcs), and ERJ-6ENF1003V (725,611 pcs) offer the highest availability. CRG0805F100K (170,134 pcs) and KTR10EZPF1003 (157,108 pcs) provide moderate availability. RC0805FR-07100KL (2,500 pcs) has the lowest inventory level among substitutes.

Frequently Asked Questions (FAQ)

Q: Can any of these substitute parts be used interchangeably with the RMC1/10-1003FTP?

A: Yes. All listed substitute parts meet the mandatory electrical and mechanical parameters: 100 kOhms ±1% resistance, 0.125W power rating, 0805 package, thick film composition, ±100ppm/°C temperature coefficient, and -55°C to 155°C operating temperature range. Direct substitution is electrically and mechanically valid.

Q: What is the difference between Tape & Reel and Cut Tape packaging?

A: Tape & Reel (TR) packaging supplies components on continuous carrier tape wound on reels, optimized for automated pick-and-place assembly at high volumes. Cut Tape (CT) & Digi-Reel packaging provides components on cut tape segments or smaller reel formats, suitable for lower-volume production or manual assembly processes. Both formats contain identical components; packaging format selection depends on assembly equipment and production volume requirements.

Q: Are Automotive AEC-Q200 certified parts required for non-automotive applications?

A: No. Automotive AEC-Q200 certification is not required for general-purpose applications. However, AEC-Q200 certified parts (ERJ-6ENF1003V, KTR10EZPF1003, RMCF0805FG100K, RMCF0805FT100K) undergo enhanced reliability testing and qualification. These parts may be selected for applications requiring higher reliability standards or when automotive-grade components are specified by design requirements.

Q: What does Moisture Sensitivity Level 1 (Unlimited) mean?

A: Moisture Sensitivity Level 1 indicates the component has unlimited shelf life and requires no special moisture control during storage or handling. This classification applies to all listed parts and the main part RMC1/10-1003FTP.

Q: Can I mix different substitute parts in the same assembly?

A: Yes. All substitute parts are electrically and mechanically equivalent. Mixing different manufacturers or part numbers in the same assembly does not affect circuit performance, provided all components meet the specified 100 kOhms ±1% tolerance and other electrical parameters.

Q: What is the significance of the height specification differences?

A: Height specifications range from 0.024" (0.60mm) to 0.028" (0.70mm) among the listed parts. These minor variations fall within standard PCB assembly tolerances and do not affect circuit functionality or PCB layout compatibility for 0805 package designs. Height differences are relevant only for applications with strict vertical clearance constraints.

Q: Are all substitute parts RoHS3 compliant?

A: All substitute parts listed include RoHS3 compliance designation. The main part RMC1/10-1003FTP does not specify RoHS status in the provided data. RoHS3 compliance indicates the component meets Restriction of Hazardous Substances regulations for lead-free and restricted substance content.