RM24WTP-CP(14)(71) Equivalent & Substitute Parts

Part Overview

The RM24WTP-CP(14)(71) is a silver connector cable clamp for internal M24x0.75 applications within the RM-W series circular connector family manufactured by Hirose Electric Co Ltd. This component is classified as obsolete, necessitating identification of active equivalent parts to maintain system compatibility and ensure continued availability for new designs and field replacements.

Substiute Parts

RM24WTP-CP(14)(71)

Hirose Electric Co LtdIn Stock: 703RM24WTP-CP(14)(71) Datasheet

Current PartRFQ

RM24WTP-CP(14)(31)

Hirose Electric Co LtdIn Stock: 967RM24WTP-CP(14)(31) Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the RM24WTP-CP(14)(71) is determined by the following critical parameters:

• Manufacturer & Series Consistency: Both parts must be Hirose Electric Co Ltd RM-W series components to ensure mechanical and electrical compatibility with existing RM-W Series Plug interfaces.
• Shell Size & Thread Specification: Shell Size 24 with M24x0.75 threading is mandatory for physical fit and assembly compatibility.
• Cable Exit Orientation: 180° cable exit must be maintained for installation geometry requirements.
• Material & Plating: Brass with nickel plating ensures corrosion resistance and electrical performance consistency.
• Ingress Protection Rating: Minimum IP67 rating is required; IP68 represents an acceptable upgrade path.

The RM24WTP-CP(14)(31) meets all substitution criteria as an active product within the same series and specification family.

Parameter Comparison

Engineering Selection Recommendations

The RM24WTP-CP(14)(31) is the direct active equivalent for the obsolete RM24WTP-CP(14)(71). Selection is based on:

• Product Status: The RM24WTP-CP(14)(31) maintains active status with Hirose Electric Co Ltd, ensuring ongoing availability and supply chain continuity.
• Regulatory Compliance: The substitute part carries RoHS Compliant certification, meeting current environmental and regulatory requirements for new designs and manufacturing.
• Performance Enhancement: The upgrade from IP67 to IP68 ingress protection provides improved environmental sealing without compromising mechanical or electrical compatibility.
• Series Compatibility: Both components are fully compatible within the RM-W Series Plug ecosystem, requiring no design modifications or interface changes.

Frequently Asked Questions (FAQ)

Q: Can RM24WTP-CP(14)(31) be used as a direct replacement for RM24WTP-CP(14)(71)?

A: Yes. Both components share identical shell size (24), thread specification (M24x0.75), cable exit orientation (180°), material composition (brass with nickel plating), and RM-W series compatibility. The substitute part meets or exceeds all functional requirements of the original component.

Q: What is the difference in ingress protection between these parts?

A: The original part provides IP67 (dust tight, waterproof) protection. The substitute part provides IP68 (dust tight, waterproof) protection, which represents an enhanced sealing capability suitable for more demanding environmental conditions.

Q: Are there packaging differences between these parts?

A: The RM24WTP-CP(14)(71) is supplied with 4 pcs (2 clamps, 1 gasket, 1 washer). The RM24WTP-CP(14)(31) is supplied with 5 pcs (1 cable clamp, 1 gasket, 2 screws, 1 washer). Verify packaging requirements for your application before procurement.

Q: Does the substitute part require design modifications?

A: No. The RM24WTP-CP(14)(31) maintains mechanical and electrical compatibility with all RM-W Series Plug interfaces. No design changes are necessary for integration.

Q: What is the RoHS compliance status?

A: The substitute part RM24WTP-CP(14)(31) is RoHS Compliant. The original part status is not specified in available documentation.