Equivalent & Substitute Parts Reference for RM 10Z (Sanken Electric USA Inc.)

Part Overview

RM 10Z is a general-purpose rectifier diode specified for 200 V DC reverse voltage and 1.5A average rectified current in axial, through-hole format. The diode features standard recovery speed and is RoHS compliant. The product is listed as obsolete, necessitating the identification of substitute models with matching electrical and mechanical parameters for continued production maintenance or design continuity.

Substiute Parts

RM 10Z

Sanken Electric USA Inc.In Stock: 1016RM 10Z Datasheet

Current PartRFQ

1N5393-E3/73

Vishay General Semiconductor - Diodes DivisionIn Stock: 51221N5393-E3/73 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

The substitution logic is strictly based on the matching of the following key parameters: diode category, DC reverse voltage, average rectified current, forward voltage at rated current, recovery speed, reverse leakage current, mounting type, package or case, RoHS status, and MSL classification. Only substitute parts matching all these parameters are considered suitable alternatives.

Parameter Comparison

Engineering Selection Recommendations

Substitution of RM 10Z requires matching product compliance parameters such as RoHS and MSL. The substitute part, 1N5393-E3/73, is RoHS compliant and shares MSL 1 (Unlimited) status. Both parts hold ECCN EAR99 and HTSUS 8541.10.0080 classifications. Parameter alignment supports direct selection when replacing an obsolete RM 10Z with 1N5393-E3/73 within the diodes, rectifiers category.

Frequently Asked Questions (FAQ)

Q1: What parameters must match for an RM 10Z substitute?
A1: Category, voltage rating, current rating, forward voltage, recovery speed, reverse leakage current, mounting type, package, RoHS status, and moisture sensitivity level must match.

Q2: Are 1N5393-E3/73 and RM 10Z compatible in terms of package?
A2: Both parts use axial through-hole formats, with main difference in case naming conventions; DO-41 (DO-204AL) is an industry-standard axial type.

Q3: Is electrical performance identical between RM 10Z and its substitute?
A3: All critical electrical ratings including reverse voltage, average rectified current, recovery type, and leakage specifications match or exceed those of the RM 10Z.

Q4: What compliance certifications are required for substituting RM 10Z?
A4: RoHS compliance, MSL classification (1), ECCN EAR99, and HTSUS 8541.10.0080 must match for suitable substitution.

Q5: Does substituting affect the mounting or reflow process?
A5: Both RM 10Z and 1N5393-E3/73 are through-hole axial diodes, suitable for identical board layouts and assembly processes.