RM024-P50-C-01 Equivalent & Substitute Parts

Part Overview

The RM024-P50-C-01 is a General ISM > 1GHz RAMP Transceiver Module manufactured by Laird Connectivity Inc. This through-hole module operates at 2.4GHz with FHSS and MSK modulation, delivering 500kbps data rate and 18dBm output power. The module features U.FL antenna connector and UART serial interface.

The RM024-P50-C-01 is classified as Obsolete. Identification of equivalent substitute parts is necessary to maintain design continuity and ensure component availability for new production runs, repairs, and system upgrades.

Substiute Parts

RM024-P50-C-01

Laird Connectivity Inc.In Stock: 1001RM024-P50-C-01 Datasheet

Current PartRFQ

RM024-P10-C-30

Laird Connectivity Inc.In Stock: 2742RM024-P10-C-30 Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the RM024-P50-C-01 is based on strict alignment of the following critical parameters:

RF and Protocol Compatibility:

• RF Family/Standard: General ISM > 1GHz
• Frequency: 2.4GHz
• Protocol: RAMP
• Modulation: FHSS (primary requirement; MSK is secondary)

Electrical Performance:

• Data Rate: 500kbps
• Power - Output: 18dBm
• Sensitivity: -95dBm
• Voltage - Supply: 2.3V ~ 3.6V
• Serial Interfaces: UART

Physical and Environmental:

• Antenna Type: Antenna Not Included, U.FL
• Mounting Type: Through Hole
• Operating Temperature: -40°C ~ 85°C
• Package / Case: Module

The RM024-P10-C-30 meets all critical substitution criteria. Both parts operate identically across RF family, frequency, protocol, data rate, output power, sensitivity, supply voltage, serial interface, antenna connector type, mounting method, and temperature range. The substitute part is currently Active and RoHS Compliant, providing improved availability and regulatory compliance compared to the Obsolete main part.

Parameter Comparison

Engineering Selection Recommendations

Primary Substitute: RM024-P10-C-30

The RM024-P10-C-30 is the direct substitute for the RM024-P50-C-01. Selection is based on the following engineering factors:

Product Status and Availability: The RM024-P10-C-30 holds Active product status with 2716 units in stock, compared to the Obsolete RM024-P50-C-01 with 898 units. Active status ensures long-term availability and continued manufacturer support.

Regulatory Compliance: The RM024-P10-C-30 is RoHS Compliant and REACH Unaffected, meeting current environmental and regulatory requirements for component procurement and system deployment.

Functional Equivalence: All critical electrical and RF parameters are identical: 2.4GHz frequency, RAMP protocol, FHSS modulation, 500kbps data rate, 18dBm output power, -95dBm sensitivity, 2.3V–3.6V supply voltage, and UART interface. Physical compatibility is maintained through identical U.FL antenna connector, through-hole mounting, and module package type.

Operating Environment: Both parts support the identical -40°C to 85°C operating temperature range, ensuring thermal compatibility across all specified applications.

Moisture Sensitivity Consideration: The RM024-P10-C-30 specifies MSL 3 (168 Hours) compared to MSL 1 (Unlimited) for the main part. This difference reflects standard industry practice for active components and does not affect functional substitution when proper handling procedures are followed during assembly.

Frequently Asked Questions (FAQ)

Q: Can the RM024-P10-C-30 directly replace the RM024-P50-C-01 in existing designs?

A: Yes. The RM024-P10-C-30 is functionally equivalent across all critical parameters: RF family, frequency, protocol, modulation, data rate, output power, sensitivity, supply voltage, serial interface, antenna connector, mounting type, and operating temperature. No design modifications are required.

Q: What is the difference in modulation between the two parts?

A: The RM024-P50-C-01 supports both FHSS and MSK modulation. The RM024-P10-C-30 supports FHSS modulation. If your application uses only FHSS, substitution is direct. If MSK modulation is required, the RM024-P10-C-30 is not suitable.

Q: Why does the RM024-P10-C-30 have a different Moisture Sensitivity Level?

A: MSL 3 (168 Hours) is standard for active RF modules and reflects current manufacturing practices. This does not affect electrical performance or functional compatibility. Proper handling during assembly and storage is required per IPC standards.

Q: Are the through-hole mounting footprints identical?

A: Both parts use through-hole mounting and module package type. Mechanical compatibility is maintained. Verify specific footprint dimensions in the respective datasheets if PCB layout has been finalized.

Q: What is the inventory status for each part?

A: The RM024-P50-C-01 (Obsolete) has 898 units in stock. The RM024-P10-C-30 (Active) has 2716 units in stock, providing significantly greater availability for production and future orders.

Q: Is the RM024-P10-C-30 RoHS compliant?

A: Yes. The RM024-P10-C-30 is RoHS Compliant and REACH Unaffected, meeting current environmental regulations for component procurement and system deployment.

Q: Can I use the RM024-P10-C-30 in applications requiring -40°C to 85°C operation?

A: Yes. Both parts support identical operating temperature range of -40°C to 85°C.