RLR07C75R0GSB14 Equivalent & Substitute Parts

Part Overview

The RLR07C75R0GSB14 is a 75 Ohm, ±2% tolerance, 1/4W through-hole axial resistor manufactured by Vishay Dale. This metal film resistor is designed for military applications per MIL-PRF-39017/01 specification and features moisture-resistant, weldable construction. The part is currently active in production with 986 units in stock. Substitute parts are identified when equivalent electrical and mechanical parameters are maintained while offering improved tolerance specifications or alternative availability.

Substiute Parts

RLR07C75R0GSB14

Vishay DaleIn Stock: 1020RLR07C75R0GSB14 Datasheet

Current PartRFQ

RLR07C75R0FSB14

Vishay DaleIn Stock: 896RLR07C75R0FSB14 Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the RLR07C75R0GSB14 is determined by the following critical parameters:

• Resistance value: 75 Ohms (exact match required)
• Power rating: 0.25W / 1/4W (exact match required)
• Package type: Axial (exact match required)
• Physical dimensions: 0.090" Dia x 0.250" L (exact match required)
• Temperature coefficient: ±100ppm/°C (exact match required)
• Operating temperature range: -65°C to 150°C (exact match required)
• Military series compliance: MIL-PRF-39017/01, RLR07 (exact match required)

The RLR07C75R0FSB14 qualifies as a direct substitute because it maintains all critical electrical and mechanical parameters while offering improved tolerance specification (±1% versus ±2%).

Parameter Comparison

Engineering Selection Recommendations

Both the RLR07C75R0GSB14 and RLR07C75R0FSB14 are active production parts with identical military compliance certifications, regulatory status, and physical specifications. The substitute part RLR07C75R0FSB14 provides tighter tolerance control (±1% versus ±2%) while maintaining all other electrical and mechanical characteristics. Selection between these parts should be based on circuit tolerance requirements and application-specific accuracy specifications. Both parts maintain equivalent failure rates, temperature performance, and military qualification status.

Frequently Asked Questions (FAQ)

Q: Can RLR07C75R0FSB14 be used as a direct replacement for RLR07C75R0GSB14?

A: Yes. The RLR07C75R0FSB14 is a direct substitute. Both parts share identical resistance values, power ratings, package dimensions, temperature coefficients, operating temperature ranges, and military series compliance. The substitute offers improved tolerance specification.

Q: What is the primary difference between these two parts?

A: The tolerance specification differs. RLR07C75R0GSB14 has ±2% tolerance, while RLR07C75R0FSB14 has ±1% tolerance. All other electrical and mechanical parameters are identical.

Q: Are the physical dimensions identical?

A: Yes. Both parts measure 0.090" Dia x 0.250" L (2.29mm x 6.35mm) and use axial through-hole packaging, ensuring identical PCB footprint and mounting compatibility.

Q: Do both parts meet the same military specifications?

A: Yes. Both parts comply with MIL-PRF-39017/01 and are part of the RLR07 military series with identical failure rate classifications.

Q: What are the regulatory compliance considerations?

A: Both parts share identical RoHS non-compliant status, REACH Affected designation, EAR99 ECCN classification, and HTSUS code 8533.21.0090.