RLR07C75R0GPB14 Equivalent & Substitute Parts

Part Overview

The RLR07C75R0GPB14 is a 75 Ohm, ±2% tolerance, 1/4W through-hole axial resistor manufactured by Vishay Dale. This metal film resistor is designed for military applications per MIL-PRF-39017/01 specification and features moisture-resistant, weldable construction. The part is currently active in production with 834 units in stock. Substitute parts are identified when equivalent electrical and mechanical parameters are maintained while offering improved performance characteristics or alternative compliance profiles.

Substiute Parts

RLR07C75R0GPB14

Vishay DaleIn Stock: 844RLR07C75R0GPB14 Datasheet

Current PartRFQ

RLR07C75R0FSB14

Vishay DaleIn Stock: 896RLR07C75R0FSB14 Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution for the RLR07C75R0GPB14 is determined by maintaining the following critical parameters:

• Resistance value: 75 Ohms (exact match required)
• Power rating: 0.25W, 1/4W (exact match required)
• Package type: Axial through-hole (exact match required)
• Physical dimensions: 0.090" Dia x 0.250" L (exact match required)
• Composition: Metal Film (exact match required)
• Operating temperature range: -65°C to 150°C (exact match required)
• Temperature coefficient: ±100ppm/°C (exact match required)
• Military series compliance: MIL-PRF-39017/01, RLR07 (exact match required)

The RLR07C75R0FSB14 qualifies as a substitute part because it maintains all critical electrical and mechanical parameters while offering improved tolerance specification (±1% versus ±2%) and superior reliability rating (Failure Rate S at 0.001% versus Failure Rate P at 0.1%).

Parameter Comparison

Engineering Selection Recommendations

Both RLR07C75R0GPB14 and RLR07C75R0FSB14 are active production parts manufactured by Vishay Dale under the military MIL-PRF-39017/01 specification. Both parts maintain identical compliance profiles with respect to RoHS non-compliance, REACH affected status, and EAR99 export classification.

The RLR07C75R0FSB14 substitute part provides improved tolerance specification at ±1% compared to the ±2% tolerance of the main part, with both maintaining the same temperature coefficient and operating temperature range. The substitute part also demonstrates superior reliability with a Failure Rate classification of S (0.001%) versus P (0.1%) for the main part.

Selection between these parts should be based on application-specific tolerance requirements and reliability specifications. Both parts are electrically and mechanically interchangeable within the constraints of their respective tolerance bands.

Frequently Asked Questions (FAQ)

Q: Can RLR07C75R0FSB14 be used as a direct replacement for RLR07C75R0GPB14?

A: Yes. Both parts maintain identical resistance value (75 Ohms), power rating (0.25W), package type (Axial), physical dimensions (0.090" Dia x 0.250" L), composition (Metal Film), temperature coefficient (±100ppm/°C), and operating temperature range (-65°C to 150°C). The substitute part offers improved tolerance (±1% versus ±2%) and superior failure rate classification.

Q: What are the key differences between these parts?

A: The primary differences are tolerance specification and failure rate rating. RLR07C75R0FSB14 provides ±1% tolerance compared to ±2% for RLR07C75R0GPB14, and carries a Failure Rate classification of S (0.001%) versus P (0.1%).

Q: Are there any package or dimensional differences?

A: No. Both parts are identical in package type (Axial through-hole) and physical dimensions (0.090" Dia x 0.250" L / 2.29mm x 6.35mm).

Q: Do both parts meet the same military specifications?

A: Yes. Both parts comply with MIL-PRF-39017/01 specification and are part of the RLR07 military series. Both feature military-grade construction with moisture resistance and weldable characteristics.

Q: Are there compliance differences between these parts?

A: No. Both parts share identical compliance status: RoHS non-compliant, REACH Affected, EAR99 export classification, and HTSUS code 8533.21.0090.