RLR07C4701GSRSL Equivalent & Substitute Parts

Part Overview

The RLR07C4701GSRSL is a 4.7 kOhms ±2% 0.25W through-hole axial resistor manufactured by Vishay Dale. This military-grade metal film resistor features moisture resistance and weldability, meeting MIL-PRF-39017/01 specifications. The part is currently active in production with 910 units in stock. Substitute parts are identified when packaging format differs while maintaining identical electrical and mechanical specifications, enabling procurement flexibility and supply chain optimization.

Substiute Parts

RLR07C4701GSRSL

Vishay DaleIn Stock: 974RLR07C4701GSRSL Datasheet

Current PartRFQ

RLR07C4701GSRE6

Vishay DaleIn Stock: 4265RLR07C4701GSRE6 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for RLR07C4701GSRSL is determined by the following parameters:

• Resistance value: 4.7 kOhms
• Tolerance: ±2%
• Power rating: 0.25W (1/4W)
• Composition: Metal Film
• Temperature coefficient: ±100ppm/°C
• Operating temperature range: -65°C to 150°C
• Package type: Axial
• Physical dimensions: 0.090" Dia x 0.250" L (2.29mm x 6.35mm)
• Series compliance: Military, MIL-PRF-39017/01, RLR07
• Failure rate: S (0.001%)

The identified substitute part RLR07C4701GSRE6 maintains all electrical and mechanical specifications. The substitution is valid based on packaging format variation (Cut Tape versus Tape & Reel), which does not affect component performance or circuit functionality.

Parameter Comparison

Engineering Selection Recommendations

Both RLR07C4701GSRSL and RLR07C4701GSRE6 are active products from Vishay Dale with identical electrical performance and military-grade specifications. Selection between these parts should be based on procurement requirements:

RLR07C4701GSRSL (Tape & Reel packaging) is suitable for high-volume automated assembly operations where reel-based component feeding is standard.

RLR07C4701GSRE6 (Cut Tape packaging) is suitable for lower-volume applications, manual assembly, or situations where individual component access is required.

Both parts comply with MIL-PRF-39017/01 military specifications and maintain equivalent failure rates. Compliance status (RoHS non-compliant, REACH Affected) is identical across both variants.

Frequently Asked Questions (FAQ)

Q: Can RLR07C4701GSRE6 be used as a direct replacement for RLR07C4701GSRSL?

A: Yes. Both parts are electrically and mechanically identical. The only difference is packaging format (Cut Tape versus Tape & Reel). Circuit performance, reliability, and compliance characteristics are equivalent.

Q: What is the difference between Tape & Reel and Cut Tape packaging?

A: Tape & Reel (TR) packaging supplies components on continuous reels suitable for automated pick-and-place assembly. Cut Tape (CT) packaging supplies components on tape segments, typically used for manual assembly or lower-volume applications. Both formats contain the same component.

Q: Are there any electrical performance differences between these parts?

A: No. Both parts have identical resistance (4.7 kOhms), tolerance (±2%), power rating (0.25W), temperature coefficient (±100ppm/°C), and operating temperature range (-65°C to 150°C).

Q: Do both parts meet military specifications?

A: Yes. Both RLR07C4701GSRSL and RLR07C4701GSRE6 comply with MIL-PRF-39017/01 and are part of the military-grade RLR07 series with S-level failure rate (0.001%).

Q: What is the inventory status for each part?

A: RLR07C4701GSRSL (Tape & Reel) has 910 units in stock. RLR07C4701GSRE6 (Cut Tape) has 4210 units in stock.