RLR07C4701GSRE5 Equivalent & Substitute Parts

Part Overview

The RLR07C4701GSRE5 is a 4.7 kOhms ±2% 0.25W through-hole axial resistor manufactured by Vishay Dale. This military-grade metal film resistor features moisture resistance and weldability, meeting MIL-PRF-39017/01 specifications. The part is currently active in production with 1011 pieces available in stock. Substitute parts are identified when packaging format differs while maintaining identical electrical and mechanical specifications, enabling procurement flexibility and supply chain optimization.

Substiute Parts

RLR07C4701GSRE5

Vishay DaleIn Stock: 1089RLR07C4701GSRE5 Datasheet

Current PartRFQ

RLR07C4701GSRE6

Vishay DaleIn Stock: 4265RLR07C4701GSRE6 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

The RLR07C4701GSRE5 and its substitute are classified as parametric equivalents based on identical electrical and mechanical specifications. Substitution is valid when the following criteria are met:

• Resistance value: 4.7 kOhms
• Tolerance: ±2%
• Power rating: 0.25W (1/4W)
• Composition: Metal Film
• Temperature coefficient: ±100ppm/°C
• Operating temperature range: -65°C to 150°C
• Package type: Axial
• Physical dimensions: 0.090" Dia x 0.250" L (2.29mm x 6.35mm)
• Military series compliance: MIL-PRF-39017/01, RLR07
• Failure rate: S (0.001%)

The primary distinction between the main part and substitute is packaging format: Tape & Reel (TR) versus Cut Tape (CT). Both formats contain identical components and are suitable for automated or manual assembly processes respectively.

Parameter Comparison

Engineering Selection Recommendations

Both RLR07C4701GSRE5 and RLR07C4701GSRE6 are active production parts from Vishay Dale with identical electrical performance and military-grade specifications. Selection between these parts should be based on assembly process requirements and supply availability. The Tape & Reel format (RLR07C4701GSRE5) is optimized for automated pick-and-place assembly systems. The Cut Tape format (RLR07C4701GSRE6) is suitable for manual assembly or lower-volume production runs. Both parts maintain RoHS non-compliance status and REACH affected classification. Inventory levels show RLR07C4701GSRE6 with higher stock availability (4210 pieces versus 1011 pieces).

Frequently Asked Questions (FAQ)

Q: Can RLR07C4701GSRE6 be used as a direct replacement for RLR07C4701GSRE5?

A: Yes. Both parts are parametric equivalents with identical electrical specifications, tolerance, power rating, temperature coefficient, and operating temperature range. The difference is packaging format only: Tape & Reel versus Cut Tape. Functional performance in the circuit is identical.

Q: What is the difference between Tape & Reel and Cut Tape packaging?

A: Tape & Reel (TR) packaging supplies components on continuous carrier tape wound on reels, designed for automated assembly equipment. Cut Tape (CT) packaging supplies the same components on cut sections of carrier tape, suitable for manual assembly or lower-volume processes. Both contain identical components.

Q: Are there any compliance or certification differences between these parts?

A: No. Both parts share identical RoHS status (non-compliant), REACH status (affected), ECCN (EAR99), and HTSUS classification (8533.21.0090). Military series compliance and failure rate specifications are identical.

Q: Which part should be selected for automated assembly?

A: RLR07C4701GSRE5 in Tape & Reel format is optimized for automated pick-and-place assembly systems. RLR07C4701GSRE6 in Cut Tape format is suitable for manual assembly or lower-volume production.

Q: Are the physical dimensions identical?

A: Yes. Both parts have identical axial package dimensions of 0.090" diameter by 0.250" length (2.29mm x 6.35mm). They are mechanically interchangeable on PCBs.