RLR07C3602GPBSL Equivalent & Substitute Parts

Part Overview

The RLR07C3602GPBSL is a 36 kOhms ±2% 0.25W through-hole resistor manufactured by Vishay Dale, designed for military applications per MIL-PRF-39017/01 specification. This metal film axial resistor features moisture resistance and weldability, making it suitable for demanding aerospace and defense environments. The part is currently active in production with 872 units in stock. Substitute parts are identified when inventory constraints, lead time requirements, or specific failure rate specifications necessitate alternative sourcing while maintaining full electrical and mechanical compatibility.

Substiute Parts

RLR07C3602GPBSL

Vishay DaleIn Stock: 936RLR07C3602GPBSL Datasheet

Current PartRFQ

RLR07C3602GSB14

Vishay DaleIn Stock: 1393RLR07C3602GSB14 Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the RLR07C3602GPBSL is determined by strict equivalence across the following parameters:

• Resistance value: 36 kOhms (exact match required)
• Tolerance: ±2% (exact match required)
• Power rating: 0.25W/1/4W (exact match required)
• Composition: Metal Film (exact match required)
• Package: Axial through-hole (exact match required)
• Temperature coefficient: ±100ppm/°C (exact match required)
• Operating temperature range: -65°C to 150°C (exact match required)
• Physical dimensions: 0.090" Dia x 0.250" L (exact match required)
• Military specification compliance: MIL-PRF-39017/01 (exact match required)

The RLR07C3602GSB14 meets all substitution criteria as a direct equivalent within the RLR07 military resistor series.

Parameter Comparison

Engineering Selection Recommendations

Both RLR07C3602GPBSL and RLR07C3602GSB14 are active military-grade resistors manufactured by Vishay Dale under MIL-PRF-39017/01 specification. Selection between these parts should be based on the following factors:

RLR07C3602GPBSL is appropriate for applications where the P-level failure rate (0.1%) meets reliability requirements and current inventory availability (872 units) supports procurement timelines.

RLR07C3602GSB14 is appropriate for applications requiring enhanced reliability with an S-level failure rate (0.001%), representing a 100-fold improvement in failure rate specification. This part also offers higher current inventory (1346 units), supporting larger production volumes or extended supply chain requirements.

Both parts maintain identical electrical performance, mechanical compatibility, and environmental specifications. The choice between them depends solely on failure rate requirements and inventory availability for the specific application.

Frequently Asked Questions (FAQ)

Q: Can RLR07C3602GSB14 be used as a direct replacement for RLR07C3602GPBSL?

A: Yes. Both parts are electrically and mechanically identical 36 kOhms ±2% metal film axial resistors with identical power ratings, temperature coefficients, operating ranges, and physical dimensions. They are both qualified to MIL-PRF-39017/01 military specification.

Q: What is the difference between failure rate P and failure rate S?

A: Failure rate P (0.1%) and failure rate S (0.001%) represent different reliability grades within military specifications. S-level represents superior reliability performance with a 100-fold lower failure rate than P-level. Selection depends on application reliability requirements.

Q: Are the physical dimensions identical between these parts?

A: Yes. Both parts share identical axial package dimensions of 0.090" diameter by 0.250" length (2.29mm x 6.35mm), ensuring mechanical compatibility in PCB layouts and through-hole applications.

Q: Do both parts meet the same military specification?

A: Yes. Both RLR07C3602GPBSL and RLR07C3602GSB14 are qualified to MIL-PRF-39017/01 and belong to the RLR07 military resistor series with identical moisture resistance and weldability features.

Q: What factors should determine which part to select?

A: Selection should be based on failure rate requirements for your application and current inventory availability. If 0.1% failure rate meets your reliability specification, either part is suitable. If enhanced reliability with 0.001% failure rate is required, RLR07C3602GSB14 is the appropriate choice.