RLR07C2701GPB14 Equivalent & Substitute Parts

Part Overview

The RLR07C2701GPB14 is a 2.7 kOhms ±2% 0.25W through-hole resistor manufactured by Vishay Dale. This axial metal film resistor is designed for military applications and features moisture-resistant, weldable construction compliant with MIL-PRF-39017/01 specifications. The part is currently active in production with 803 units in stock. Substitute parts are identified when inventory constraints, lead time requirements, or specific failure rate specifications necessitate alternative sourcing while maintaining full electrical and mechanical compatibility.

Substiute Parts

RLR07C2701GPB14

Vishay DaleIn Stock: 839RLR07C2701GPB14 Datasheet

Current PartRFQ

RLR07C2701GSB14

Vishay DaleIn Stock: 918RLR07C2701GSB14 Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the RLR07C2701GPB14 are qualified based on strict equivalence across the following critical parameters:

• Resistance value: 2.7 kOhms
• Tolerance: ±2%
• Power rating: 0.25W (1/4W)
• Composition: Metal Film
• Temperature coefficient: ±100ppm/°C
• Operating temperature range: -65°C to 150°C
• Package type: Axial
• Physical dimensions: 0.090" Dia × 0.250" L
• Series compliance: MIL-PRF-39017/01, RLR07 base product
• Features: Military, Moisture Resistant, Weldable

The RLR07C2701GSB14 meets all electrical and mechanical requirements for direct substitution. The primary distinction between the main part and substitute is the failure rate classification, which reflects different quality screening levels within the same product family.

Parameter Comparison

Engineering Selection Recommendations

Both the RLR07C2701GPB14 and RLR07C2701GSB14 are active production parts manufactured by Vishay Dale under the same military specification series. Selection between these parts should be based on failure rate requirements and application criticality. The RLR07C2701GSB14 features a lower failure rate (0.001% versus 0.1%), making it suitable for high-reliability applications where enhanced screening and quality assurance are required. Both parts maintain identical electrical performance, mechanical compatibility, and regulatory compliance status. Current inventory availability is 803 units for the primary part and 836 units for the substitute.

Frequently Asked Questions (FAQ)

Q: Can RLR07C2701GSB14 be used as a direct replacement for RLR07C2701GPB14?

A: Yes. Both parts are electrically and mechanically identical across all specified parameters including resistance value, tolerance, power rating, temperature coefficient, operating temperature range, and physical dimensions. The difference in failure rate classification does not affect functional compatibility.

Q: What is the significance of the failure rate difference between these parts?

A: Failure rate classification reflects the level of quality screening and burn-in testing applied during manufacturing. The RLR07C2701GSB14 with a 0.001% failure rate undergoes more rigorous screening than the RLR07C2701GPB14 with a 0.1% failure rate. Selection depends on application reliability requirements.

Q: Are there any packaging or handling differences between these parts?

A: No. Both parts are supplied in bulk packaging and feature identical axial package construction with 0.090" diameter and 0.250" length. Physical handling, storage, and installation procedures are identical.

Q: Do these parts meet the same military specifications?

A: Yes. Both parts comply with MIL-PRF-39017/01 and are part of the RLR07 military resistor series. They share identical feature sets including military grade, moisture resistance, and weldability.

Q: What regulatory compliance applies to both parts?

A: Both parts are RoHS non-compliant and REACH Affected. They carry the same ECCN (EAR99) and HTSUS (8533.21.0090) classifications.