RLR07C2201GSB14 Equivalent & Substitute Parts

Part Overview

The RLR07C2201GSB14 is a 2.2 kOhms ±2% 0.25W through-hole resistor manufactured by Vishay Dale in axial configuration. This metal film resistor is designed for military applications per MIL-PRF-39017/01 specification and features moisture-resistant, weldable construction. The part is currently active in production with 753 units in stock. Substitute parts are identified when equivalent electrical and mechanical parameters are maintained within the allowed specifications for this resistor category.

Substiute Parts

RLR07C2201GSB14

Vishay DaleIn Stock: 821RLR07C2201GSB14 Datasheet

Current PartRFQ

RLR07C2201GRB14

Vishay DaleIn Stock: 947RLR07C2201GRB14 Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the RLR07C2201GSB14 is determined by strict equivalence across the following critical parameters:

• Resistance value: 2.2 kOhms
• Tolerance: ±2%
• Power rating: 0.25W (1/4W)
• Composition: Metal Film
• Package configuration: Axial
• Temperature coefficient: ±100ppm/°C
• Operating temperature range: -65°C to 150°C
• Physical dimensions: 0.090" Dia x 0.250" L
• Military series compliance: MIL-PRF-39017/01, RLR07 base product

The RLR07C2201GRB14 meets all these criteria and is classified as a direct substitute. Differences in failure rate classification do not affect functional substitutability for equivalent circuit applications.

Parameter Comparison

Engineering Selection Recommendations

Both RLR07C2201GSB14 and RLR07C2201GRB14 are active production parts with identical electrical and mechanical specifications. Selection between these parts should be based on:

• Availability: RLR07C2201GRB14 has 892 units in stock versus 753 units for RLR07C2201GSB14
• Failure rate requirements: RLR07C2201GSB14 offers S-grade (0.001%) failure rate; RLR07C2201GRB14 offers R-grade (0.01%) failure rate
• Regulatory compliance: Both parts carry identical RoHS non-compliant and REACH Affected designations with EAR99 export classification

Frequently Asked Questions (FAQ)

Q: Can RLR07C2201GRB14 be used as a direct replacement for RLR07C2201GSB14?

A: Yes. Both parts are identical in resistance value (2.2 kOhms), tolerance (±2%), power rating (0.25W), composition (metal film), package type (axial), temperature coefficient (±100ppm/°C), operating temperature range (-65°C to 150°C), and physical dimensions (0.090" Dia x 0.250" L). The only difference is the failure rate classification.

Q: What is the difference between the S and R failure rate grades?

A: RLR07C2201GSB14 carries an S-grade failure rate of 0.001%, while RLR07C2201GRB14 carries an R-grade failure rate of 0.01%. Both are military-qualified parts per MIL-PRF-39017/01.

Q: Are these parts suitable for high-reliability applications?

A: Both parts are military-grade resistors with moisture-resistant, weldable construction and operate across the -65°C to 150°C temperature range. Selection should be based on specific failure rate requirements for your application.

Q: Do these parts have any RoHS or REACH compliance considerations?

A: Both RLR07C2201GSB14 and RLR07C2201GRB14 are RoHS non-compliant and REACH Affected. Both carry EAR99 export classification.

Q: Are the physical dimensions identical between substitute parts?

A: Yes. Both parts measure 0.090" diameter by 0.250" length (2.29mm x 6.35mm) in axial configuration with two terminations.