RLR07C2201GPB14 Equivalent & Substitute Parts

Part Overview

The RLR07C2201GPB14 is a 2.2 kOhms ±2% 0.25W through-hole resistor manufactured by Vishay Dale in axial configuration. This metal film resistor is designed for military applications with moisture resistance and weldable terminations, complying with MIL-PRF-39017/01 specifications. The part is currently active in production with 1017 units in stock. Substitute parts are identified when electrical and mechanical parameters remain within the allowed specifications for this resistor category.

Substiute Parts

RLR07C2201GPB14

Vishay DaleIn Stock: 1112RLR07C2201GPB14 Datasheet

Current PartRFQ

RLR07C2201GRB14

Vishay DaleIn Stock: 947RLR07C2201GRB14 Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the RLR07C2201GPB14 are qualified based on the following criteria:

• Identical resistance value: 2.2 kOhms
• Matching tolerance: ±2%
• Equivalent power rating: 0.25W (1/4W)
• Same composition: Metal Film
• Identical package configuration: Axial
• Matching temperature coefficient: ±100ppm/°C
• Overlapping operating temperature range: -65°C to 150°C
• Same military series designation: MIL-PRF-39017/01, RLR07
• Identical physical dimensions: 0.090" Dia x 0.250" L (2.29mm x 6.35mm)
• Same number of terminations: 2

The RLR07C2201GRB14 meets all these criteria and qualifies as a direct substitute.

Parameter Comparison

Engineering Selection Recommendations

Both the RLR07C2201GPB14 and RLR07C2201GRB14 are active products from Vishay Dale with identical electrical and mechanical specifications. The primary distinction is the failure rate classification: the RLR07C2201GRB14 carries a lower failure rate designation (R at 0.01%) compared to the RLR07C2201GPB14 (P at 0.1%). Both parts maintain RoHS non-compliant and REACH Affected status. Selection between these parts should be based on application reliability requirements and failure rate specifications.

Frequently Asked Questions (FAQ)

Q: Can RLR07C2201GRB14 be used as a direct replacement for RLR07C2201GPB14?

A: Yes. Both parts share identical electrical parameters (2.2 kOhms ±2%, 0.25W), composition (metal film), package configuration (axial), temperature characteristics (±100ppm/°C, -65°C to 150°C), and military series designation (MIL-PRF-39017/01). Physical dimensions and termination count are identical.

Q: What is the difference between these two part numbers?

A: The RLR07C2201GRB14 has a lower failure rate classification (R at 0.01%) compared to the RLR07C2201GPB14 (P at 0.1%). All other specifications are equivalent.

Q: Are there any compliance differences between these parts?

A: Both parts carry identical compliance status: RoHS non-compliant and REACH Affected. No compliance advantage exists between the two options.

Q: Can these axial resistors be used in applications requiring surface-mount components?

A: No. Both parts are through-hole axial resistors and are not suitable for surface-mount applications. Through-hole and surface-mount packages are mechanically and electrically distinct form factors.

Q: What military standard do these resistors comply with?

A: Both parts comply with MIL-PRF-39017/01 and are designated within the RLR07 military series.