RLR07C2000GSBSL Equivalent & Substitute Parts

Part Overview

The RLR07C2000GSBSL is a 200 Ohm ±2% metal film axial resistor rated at 0.25W (1/4W) manufactured by Vishay Dale. This component is part of the military-grade RLR07 series, designed to MIL-PRF-39017/01 specifications with moisture-resistant and weldable characteristics. The part is currently active in production with 761 units in stock. Substitute parts are identified to address inventory availability, tolerance requirements, or specific application needs while maintaining electrical and mechanical compatibility.

Substiute Parts

RLR07C2000GSBSL

Vishay DaleIn Stock: 837RLR07C2000GSBSL Datasheet

Current PartRFQ

RLR07C2000FSB14

Vishay DaleIn Stock: 1352RLR07C2000FSB14 Datasheet

UpgradeRFQ

RLR07C2000GSB14

Vishay DaleIn Stock: 1061RLR07C2000GSB14 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the RLR07C2000GSBSL are identified based on strict electrical and mechanical parameter matching within the RLR07 military series. The primary substitution criteria are:

• Resistance value: 200 Ohms (exact match required)
• Power rating: 0.25W (1/4W) (exact match required)
• Package type: Axial (exact match required)
• Physical dimensions: 0.090" Dia x 0.250" L (exact match required)
• Composition: Metal Film (exact match required)
• Operating temperature range: -65°C to 150°C (exact match required)
• Series compliance: MIL-PRF-39017/01, RLR07 (exact match required)

Tolerance variations (±2% to ±1%) are permitted substitutions when the application circuit design allows tighter tolerance specifications. All substitute parts maintain identical temperature coefficient, failure rate classification, and military-grade moisture-resistant, weldable characteristics.

Parameter Comparison

Engineering Selection Recommendations

All three parts—RLR07C2000GSBSL, RLR07C2000FSB14, and RLR07C2000GSB14—are active military-grade components manufactured by Vishay Dale within the MIL-PRF-39017/01 specification. Selection between these parts depends on tolerance requirements and inventory availability:

RLR07C2000GSBSL and RLR07C2000GSB14 are electrically and mechanically identical, both specified at ±2% tolerance. RLR07C2000FSB14 provides tighter tolerance at ±1%, suitable for applications requiring improved accuracy. All parts share identical physical dimensions, temperature performance, and military compliance characteristics. Component selection should be based on circuit tolerance specifications and current inventory levels.

Frequently Asked Questions (FAQ)

Q: Can RLR07C2000FSB14 replace RLR07C2000GSBSL in any application?

A: Yes. RLR07C2000FSB14 is electrically and mechanically compatible. The ±1% tolerance of RLR07C2000FSB14 is tighter than the ±2% specification of RLR07C2000GSBSL, making it suitable for all applications designed for the original part.

Q: Can RLR07C2000GSB14 replace RLR07C2000GSBSL?

A: Yes. RLR07C2000GSB14 is a parametric equivalent with identical electrical and mechanical specifications, including ±2% tolerance, power rating, and physical dimensions.

Q: Are there any package or footprint differences between these parts?

A: No. All three parts are axial through-hole resistors with identical physical dimensions of 0.090" Dia x 0.250" L (2.29mm x 6.35mm).

Q: Do all substitute parts meet the same military specifications?

A: Yes. All parts comply with MIL-PRF-39017/01 and are classified as military-grade components with identical failure rate ratings of S (0.001%).

Q: What is the difference between the main part and its substitutes?

A: RLR07C2000GSBSL and RLR07C2000GSB14 are identical in all electrical and mechanical parameters. RLR07C2000FSB14 differs only in tolerance specification (±1% versus ±2%), providing improved accuracy for precision applications.