RLR07C2000GMB14 Equivalent & Substitute Parts

Part Overview

The RLR07C2000GMB14 is a 200 Ohm ±2% 0.25W axial through-hole resistor manufactured by Vishay Dale, designed to MIL-PRF-39017/01 military specifications. This metal film resistor features moisture resistance and weldability, making it suitable for military and aerospace applications requiring high reliability. The part is currently active in production with 1066 units in stock. Equivalent and substitute parts are identified to support procurement flexibility, inventory management, and application-specific performance requirements.

Substiute Parts

RLR07C2000GMB14

Vishay DaleIn Stock: 1108RLR07C2000GMB14 Datasheet

Current PartRFQ

RLR07C2000GSB14

Vishay DaleIn Stock: 1061RLR07C2000GSB14 Datasheet

DirectRFQ

RLR07C2000FSB14

Vishay DaleIn Stock: 1352RLR07C2000FSB14 Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the RLR07C2000GMB14 is determined by the following critical parameters:

• Resistance Value: Must be 200 Ohms
• Power Rating: Must be 0.25W (1/4W)
• Package Type: Must be Axial
• Physical Dimensions: Must be 0.090" Dia × 0.250" L
• Composition: Must be Metal Film
• Operating Temperature Range: Must support -65°C to 150°C
• Series Compliance: Must conform to MIL-PRF-39017/01 military specification
• Termination Count: Must have 2 terminations

Substitute parts are grouped into two categories:

Direct Equivalent: RLR07C2000GSB14 maintains identical electrical and mechanical specifications with equivalent failure rate classification (S: 0.001%).

Upgrade Option: RLR07C2000FSB14 provides improved tolerance (±1% versus ±2%) while maintaining all other critical parameters, offering enhanced precision for applications requiring tighter resistance values.

Parameter Comparison

Engineering Selection Recommendations

RLR07C2000GSB14 is the direct equivalent substitute, offering identical electrical performance and mechanical compatibility. This part is suitable for one-to-one replacement in applications where the original specification is maintained. Both the main part and this substitute are active products with established supply chains.

RLR07C2000FSB14 is recommended as an upgrade option for applications requiring improved tolerance performance. The ±1% tolerance specification provides tighter resistance accuracy compared to the ±2% tolerance of the main part, while maintaining full compliance with MIL-PRF-39017/01 military specifications and all other electrical and mechanical parameters. This upgrade is appropriate when circuit design margins or precision requirements justify the substitution.

All three parts share identical RoHS non-compliance status, REACH affected status, and ECCN/HTSUS classifications, ensuring regulatory consistency across substitution options.

Frequently Asked Questions (FAQ)

Q: Can RLR07C2000GSB14 be used as a direct replacement for RLR07C2000GMB14?

A: Yes. RLR07C2000GSB14 is a direct equivalent with identical resistance value (200 Ohms), tolerance (±2%), power rating (0.25W), package type (Axial), physical dimensions, and operating temperature range. Both parts conform to MIL-PRF-39017/01 specifications and are mechanically and electrically interchangeable.

Q: What is the difference between RLR07C2000GMB14 and RLR07C2000FSB14?

A: The primary difference is tolerance specification. RLR07C2000FSB14 provides ±1% tolerance versus the ±2% tolerance of RLR07C2000GMB14. All other parameters—resistance value, power rating, package type, dimensions, temperature range, and military compliance—remain identical. RLR07C2000FSB14 is suitable for applications requiring higher precision resistance values.

Q: Are all substitute parts available in the same package type?

A: Yes. All three parts (RLR07C2000GMB14, RLR07C2000GSB14, and RLR07C2000FSB14) are supplied in axial through-hole package with identical physical dimensions of 0.090" Dia × 0.250" L (2.29mm × 6.35mm), ensuring mechanical compatibility in PCB layouts and assembly processes.

Q: Do substitute parts meet the same military specifications?

A: Yes. All substitute parts conform to MIL-PRF-39017/01 military specification and are part of the RLR07 series. They maintain the same metal film composition, moisture resistance, and weldability features required for military and aerospace applications.

Q: What is the significance of the failure rate difference between parts?

A: RLR07C2000GMB14 has a failure rate classification of M (1%), while both RLR07C2000GSB14 and RLR07C2000FSB14 have a failure rate classification of S (0.001%). This indicates improved reliability characteristics in the substitute parts, though all parts are suitable for military applications.