RLR07C2000FSBSL Equivalent & Substitute Parts

Part Overview

The RLR07C2000FSBSL is a 200 Ohm ±1% 0.25W (1/4W) through-hole resistor manufactured by Vishay Dale. This axial metal film resistor is designed for military applications per MIL-PRF-39017/01 specification and features moisture-resistant, weldable construction. The part maintains active product status with 1049 units in current inventory. Substitute parts are identified when identical electrical and mechanical parameters are maintained across the same military series, enabling component interchangeability for procurement flexibility and supply chain continuity.

Substiute Parts

RLR07C2000FSBSL

Vishay DaleIn Stock: 1070RLR07C2000FSBSL Datasheet

Current PartRFQ

RLR07C2000FSB14

Vishay DaleIn Stock: 1352RLR07C2000FSB14 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the RLR07C2000FSBSL is determined by strict equivalence across all critical electrical and mechanical parameters. The substitute part RLR07C2000FSB14 qualifies as a parametric equivalent based on the following criteria:

• Identical resistance value: 200 Ohms
• Identical tolerance: ±1%
• Identical power rating: 0.25W (1/4W)
• Identical composition: Metal Film
• Identical package type: Axial
• Identical temperature coefficient: ±100ppm/°C
• Identical operating temperature range: -65°C to 150°C
• Identical physical dimensions: 0.090" Dia x 0.250" L (2.29mm x 6.35mm)
• Identical military series designation: MIL-PRF-39017/01, RLR07
• Identical failure rate classification: S (0.001%)
• Identical features: Military, Moisture Resistant, Weldable

Both parts are manufactured by Vishay Dale and maintain active product status. Substitution is valid for direct component replacement in applications requiring these specifications.

Parameter Comparison

Engineering Selection Recommendations

Both RLR07C2000FSBSL and RLR07C2000FSB14 are active products manufactured by Vishay Dale within the military-grade RLR07 series. Selection between these parts may be based on inventory availability: RLR07C2000FSBSL has 1049 units in stock, while RLR07C2000FSB14 has 1299 units available. Both parts are RoHS non-compliant and REACH-affected, with identical ECCN (EAR99) and HTSUS (8533.21.0090) classifications. For applications requiring military-specification resistors with moisture resistance and weldable construction, either part provides equivalent performance and reliability characteristics.

Frequently Asked Questions (FAQ)

Q: Can RLR07C2000FSB14 be used as a direct replacement for RLR07C2000FSBSL?

A: Yes. Both parts are parametric equivalents with identical electrical specifications (200 Ohms ±1%, 0.25W), identical composition (metal film), identical package type (axial), and identical physical dimensions (0.090" Dia x 0.250" L). They are both manufactured by Vishay Dale within the same military series (MIL-PRF-39017/01, RLR07) and maintain identical operating temperature ranges (-65°C to 150°C) and failure rate classifications (S, 0.001%).

Q: Are there any differences in compliance or certification between these parts?

A: No. Both parts share identical RoHS status (non-compliant), REACH status (affected), ECCN classification (EAR99), and HTSUS code (8533.21.0090). Both maintain active product status.

Q: What determines substitution eligibility for this resistor?

A: Substitution is valid when the following parameters remain identical: resistance value, tolerance, power rating, composition, package type, temperature coefficient, operating temperature range, physical dimensions, military series designation, and failure rate classification. The RLR07C2000FSB14 meets all these criteria.

Q: Are there inventory considerations when selecting between these parts?

A: Yes. RLR07C2000FSBSL has 1049 units in stock, while RLR07C2000FSB14 has 1299 units available. For high-volume requirements, RLR07C2000FSB14 offers greater immediate availability.

Q: Can these parts be used interchangeably in PCB assembly?

A: Yes. Both parts have identical axial package specifications and physical dimensions (0.090" Dia x 0.250" L), enabling direct substitution in through-hole PCB designs without layout modifications.