RLR07C1102GSB14 Equivalent & Substitute Parts

Part Overview

The RLR07C1102GSB14 is a 11 kOhms ±2% 0.25W through-hole resistor manufactured by Vishay Dale. This metal film axial resistor is designed for military applications per MIL-PRF-39017/01 specification, featuring moisture resistance and weldability. The component is currently active in production with 1085 pieces in stock. Substitute parts are identified when equivalent electrical and mechanical parameters allow direct replacement while maintaining circuit performance and compliance requirements.

Substiute Parts

RLR07C1102GSB14

Vishay DaleIn Stock: 1102RLR07C1102GSB14 Datasheet

Current PartRFQ

RLR07C1102FSB14

Vishay DaleIn Stock: 1215RLR07C1102FSB14 Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the RLR07C1102GSB14 is determined by the following critical parameters:

• Resistance value: 11 kOhms (exact match required)
• Power rating: 0.25W minimum (equal or higher acceptable)
• Package type: Axial (mechanical compatibility)
• Composition: Metal film (electrical performance consistency)
• Temperature coefficient: ±100ppm/°C (thermal stability)
• Operating temperature range: -65°C to 150°C (environmental compatibility)
• Series compliance: MIL-PRF-39017/01 military specification
• Features: Military grade, moisture resistant, weldable

The identified substitute RLR07C1102FSB14 maintains all critical electrical and mechanical parameters while offering improved tolerance specification (±1% versus ±2%), providing enhanced precision for applications requiring tighter component tolerances.

Parameter Comparison

Engineering Selection Recommendations

Both the RLR07C1102GSB14 and RLR07C1102FSB14 are active production components from Vishay Dale within the military-grade RLR07 series. Selection between these parts depends on circuit tolerance requirements:

The RLR07C1102GSB14 (±2% tolerance) is suitable for applications where standard military-grade precision is acceptable. The RLR07C1102FSB14 (±1% tolerance) provides enhanced precision for circuits requiring tighter resistance value control. Both components share identical compliance status (RoHS non-compliant, REACH Affected, EAR99 classification) and maintain equivalent reliability metrics (S-level failure rate). Inventory availability shows 1204 pieces for the substitute part versus 1085 pieces for the main part.

Frequently Asked Questions (FAQ)

Q: Can RLR07C1102FSB14 directly replace RLR07C1102GSB14 in existing designs?

A: Yes. The substitute part maintains identical resistance value (11 kOhms), power rating (0.25W), package type (axial), temperature coefficient (±100ppm/°C), and operating temperature range (-65°C to 150°C). The improved tolerance (±1% versus ±2%) provides equal or better performance in all applications.

Q: What is the primary difference between these two parts?

A: The tolerance specification differs. RLR07C1102GSB14 has ±2% tolerance, while RLR07C1102FSB14 has ±1% tolerance. All other electrical and mechanical parameters are identical.

Q: Are both parts compliant with military specifications?

A: Both components comply with MIL-PRF-39017/01 military specification and are part of the RLR07 military-grade series. Both share identical RoHS non-compliant and REACH Affected status.

Q: Do these parts have the same physical dimensions?

A: Yes. Both parts have identical axial package dimensions of 0.090" diameter by 0.250" length (2.29mm x 6.35mm), ensuring mechanical compatibility in PCB layouts and through-hole applications.

Q: Which part should be selected for new designs?

A: Selection depends on circuit tolerance requirements. For applications requiring ±1% precision, specify RLR07C1102FSB14. For applications where ±2% tolerance is acceptable, either part is suitable based on availability and cost considerations.