RLR07C10R0FSRE5 Equivalent & Substitute Parts

Part Overview

The RLR07C10R0FSRE5 is a 10 Ohm ±1% 0.25W through-hole axial resistor manufactured by Vishay Dale. This military-grade metal film resistor features moisture resistance and weldability, meeting MIL-PRF-39017/01 specifications. The part is currently active in production with 873 pieces in stock. Substitute parts are identified to provide alternative sourcing options when the primary packaging format (Tape & Reel) is unavailable or when alternative inventory levels are required.

Substiute Parts

RLR07C10R0FSRE5

Vishay DaleIn Stock: 968RLR07C10R0FSRE5 Datasheet

Current PartRFQ

RLR07C10R0FSRE6

Vishay DaleIn Stock: 3952RLR07C10R0FSRE6 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

The RLR07C10R0FSRE5 and its identified substitute share identical electrical and mechanical specifications. Substitution is valid based on the following matching parameters:

• Resistance value: 10 Ohms
• Tolerance: ±1%
• Power rating: 0.25W
• Composition: Metal Film
• Temperature coefficient: ±100ppm/°C
• Operating temperature range: -65°C to 150°C
• Physical dimensions: 0.090" Dia x 0.250" L
• Military series compliance: MIL-PRF-39017/01, RLR07
• Failure rate classification: S (0.001%)

The primary difference between the main part and substitute is the packaging format: Tape & Reel (TR) versus Cut Tape (CT). Both formats contain identical components with no electrical or mechanical variation.

Parameter Comparison

Engineering Selection Recommendations

Both RLR07C10R0FSRE5 and RLR07C10R0FSRE6 are active military-grade components with identical electrical and mechanical specifications. Selection between these parts should be based on packaging requirements and inventory availability:

• RLR07C10R0FSRE5 (Tape & Reel) is suitable for automated assembly processes requiring continuous reel feeding.
• RLR07C10R0FSRE6 (Cut Tape) is suitable for manual assembly, small-batch production, or applications where individual component handling is preferred.

Both parts maintain RoHS non-compliant status, REACH affected classification, and EAR99 ECCN designation. No electrical performance variation exists between the two packaging formats.

Frequently Asked Questions (FAQ)

Q: Can RLR07C10R0FSRE6 be used as a direct replacement for RLR07C10R0FSRE5?

A: Yes. Both parts are electrically and mechanically identical. The only difference is packaging format (Cut Tape versus Tape & Reel). Direct substitution is valid for any application where the component specifications match the circuit requirements.

Q: What is the difference between Tape & Reel and Cut Tape packaging?

A: Tape & Reel (TR) packaging supplies components on a continuous reel suitable for automated pick-and-place assembly equipment. Cut Tape (CT) packaging supplies individual components or small quantities cut from tape, suitable for manual assembly or low-volume applications. The components themselves are identical.

Q: Are there any performance differences between these substitute parts?

A: No. Both parts share identical resistance value (10 Ohms), tolerance (±1%), power rating (0.25W), temperature coefficient (±100ppm/°C), operating temperature range (-65°C to 150°C), and failure rate classification (S, 0.001%). Performance is equivalent across all electrical and thermal parameters.

Q: Which part should be selected for high-volume production?

A: RLR07C10R0FSRE5 (Tape & Reel) is optimized for high-volume automated assembly. RLR07C10R0FSRE6 (Cut Tape) is better suited for lower-volume or manual assembly operations.

Q: Do both parts meet the same military specifications?

A: Yes. Both parts comply with MIL-PRF-39017/01 and are part of the RLR07 military series. Military classification, failure rate, and all performance certifications are identical.