RLR07C10R0FSK36 Equivalent & Substitute Parts

Part Overview

The RLR07C10R0FSK36 is a 10 Ohm ±1% 0.25W through-hole axial resistor manufactured by Vishay Dale, designed to MIL-PRF-39017/01 military specifications. This metal film resistor features moisture resistance and weldability, making it suitable for military and high-reliability applications. The part is currently active in production with 724 pieces in stock. Substitute parts are identified to provide alternative sourcing options when the primary packaging format (Tape & Reel) is unavailable or when inventory constraints require alternative procurement channels.

Substiute Parts

RLR07C10R0FSK36

Vishay DaleIn Stock: 824RLR07C10R0FSK36 Datasheet

Current PartRFQ

RLR07C10R0FSRE6

Vishay DaleIn Stock: 3952RLR07C10R0FSRE6 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

The RLR07C10R0FSRE6 is classified as a parametric equivalent to the RLR07C10R0FSK36. Substitution is valid based on the following criteria:

Electrical Parameters (Identical):

• Resistance value: 10 Ohms
• Tolerance: ±1%
• Power rating: 0.25W
• Temperature coefficient: ±100ppm/°C
• Operating temperature range: -65°C to 150°C

Mechanical Parameters (Identical):

• Package type: Axial
• Physical dimensions: 0.090" Dia x 0.250" L
• Number of terminations: 2

Series & Compliance (Identical):

• Military series: MIL-PRF-39017/01, RLR07
• Composition: Metal Film
• Features: Military, Moisture Resistant, Weldable
• Failure rate: S (0.001%)

Packaging Difference:

• Main part: Tape & Reel (TR)
• Substitute part: Cut Tape (CT)

The substitute part differs only in packaging format, not in electrical or mechanical performance. Both parts meet identical military specifications and performance criteria.

Parameter Comparison

Engineering Selection Recommendations

Both the RLR07C10R0FSK36 and RLR07C10R0FSRE6 are active products manufactured to identical military specifications. Selection between these parts should be based on procurement and assembly requirements:

RLR07C10R0FSK36 (Tape & Reel): Suitable for automated assembly processes requiring continuous tape-fed component delivery. Recommended for high-volume production environments with automated pick-and-place equipment.

RLR07C10R0FSRE6 (Cut Tape): Suitable for manual assembly, low-volume production, or situations where component quantities are limited. Cut tape format provides flexibility for smaller batch sizes and manual handling.

Both parts maintain identical electrical performance, military compliance, and reliability characteristics. The choice between them is determined by assembly methodology and procurement logistics, not by technical performance differences.

Frequently Asked Questions (FAQ)

Q: Can RLR07C10R0FSRE6 be used as a direct replacement for RLR07C10R0FSK36?

A: Yes. Both parts are electrically and mechanically identical, meeting the same MIL-PRF-39017/01 specifications. The only difference is packaging format (Cut Tape versus Tape & Reel). Direct substitution is valid from a performance standpoint.

Q: What is the difference between Tape & Reel and Cut Tape packaging?

A: Tape & Reel (TR) packaging delivers components on continuous tape wound on a reel, designed for automated assembly equipment. Cut Tape (CT) packaging provides the same components on tape segments, suitable for manual assembly or smaller quantities. Both formats contain identical components.

Q: Are there any compliance or certification differences between these parts?

A: No. Both parts carry identical military series designation (MIL-PRF-39017/01, RLR07), failure rate classification (S), and compliance status (RoHS non-compliant, REACH Affected). Certifications and regulatory status are identical.

Q: Which part should be selected for automated assembly?

A: RLR07C10R0FSK36 (Tape & Reel) is the standard choice for automated pick-and-place assembly systems. This packaging format is optimized for continuous feed into assembly equipment.

Q: Which part should be selected for manual assembly or prototyping?

A: RLR07C10R0FSRE6 (Cut Tape) is suitable for manual assembly, prototyping, or low-volume applications where component quantities are small and continuous tape feeding is not required.

Q: Do these parts have identical temperature performance?

A: Yes. Both parts operate across the same temperature range (-65°C to 150°C) with identical temperature coefficient (±100ppm/°C), ensuring equivalent thermal performance in all operating conditions.

Q: Are inventory levels a consideration for substitution?

A: Inventory availability may influence procurement decisions. RLR07C10R0FSRE6 currently has higher stock levels (3928 pieces) compared to RLR07C10R0FSK36 (724 pieces), which may affect lead times and availability.