RLR07C1005GPB14 Equivalent & Substitute Parts

Part Overview

The RLR07C1005GPB14 is a 10 MOhms ±2% 0.25W axial through-hole resistor manufactured by Vishay Dale. This metal film resistor is designed for military applications per MIL-PRF-39017/01 specification, featuring moisture resistance and weldability characteristics. The part is currently active in production with 858 units in stock. Substitute parts are identified when equivalent electrical and mechanical parameters are maintained within the allowable specifications for this resistor category.

Substiute Parts

RLR07C1005GPB14

Vishay DaleIn Stock: 905RLR07C1005GPB14 Datasheet

Current PartRFQ

RLR07C1005GMB14

Vishay DaleIn Stock: 1045RLR07C1005GMB14 Datasheet

DirectRFQ

RLR07C1005FMB14

Vishay DaleIn Stock: 971RLR07C1005FMB14 Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the RLR07C1005GPB14 is determined by the following critical parameters:

• Resistance Value: Must be 10 MOhms
• Power Rating: Must be 0.25W (1/4W)
• Package Type: Must be Axial
• Physical Dimensions: Must be 0.090" Dia × 0.250" L
• Composition: Must be Metal Film
• Temperature Coefficient: Must be ±100ppm/°C
• Operating Temperature Range: Must be -65°C to 150°C
• Series Compliance: Must be RLR07 series, MIL-PRF-39017/01

Tolerance and failure rate parameters may vary within acceptable ranges for military-grade resistors. Parts meeting all critical parameters are classified as direct substitutes or upgrades based on tolerance specifications.

Parameter Comparison

Engineering Selection Recommendations

RLR07C1005GMB14 (Direct Substitute): This part maintains identical electrical specifications to the main part, with the same ±2% tolerance and 0.25W power rating. All mechanical and environmental parameters are equivalent. The difference in failure rate (M vs. P classification) reflects manufacturing process variation within the RLR07 military series. This part is suitable for direct replacement in applications where the original specification is maintained.

RLR07C1005FMB14 (Upgrade Substitute): This part offers improved tolerance performance at ±1%, compared to the ±2% of the main part, while maintaining all other electrical and mechanical specifications. The tighter tolerance may benefit applications requiring enhanced precision. Both parts share the same military series designation, operating temperature range, and physical form factor. Selection of this upgrade should be based on application tolerance requirements.

All three parts are active products with current manufacturing status and full MIL-PRF-39017/01 compliance. RoHS non-compliance status is consistent across all variants.

Frequently Asked Questions (FAQ)

Q: Can RLR07C1005GMB14 be used as a direct replacement for RLR07C1005GPB14?

A: Yes. Both parts share identical resistance value (10 MOhms), tolerance (±2%), power rating (0.25W), composition (metal film), temperature coefficient (±100ppm/°C), operating temperature range (-65°C to 150°C), and axial package dimensions (0.090" Dia × 0.250" L). They are interchangeable for applications requiring these specifications.

Q: What is the advantage of RLR07C1005FMB14 over the main part?

A: RLR07C1005FMB14 provides ±1% tolerance versus ±2% for the main part. All other parameters—resistance value, power rating, temperature coefficient, operating range, and physical dimensions—remain identical. Selection depends on whether the application requires tighter tolerance performance.

Q: Are all three parts qualified to the same military standard?

A: Yes. All three parts are manufactured to MIL-PRF-39017/01 specification and belong to the RLR07 military resistor series. They share identical environmental ratings and feature sets (moisture resistant, weldable).

Q: Do the physical dimensions differ between these parts?

A: No. All three parts have identical axial package dimensions of 0.090" Dia × 0.250" L (2.29mm × 6.35mm), ensuring mechanical compatibility in PCB layouts and through-hole applications.

Q: What does the failure rate difference mean?

A: Failure rate classifications (P at 0.1% and M at 1%) reflect expected failure rates under specified conditions. The main part has a lower failure rate specification. Selection should be based on application reliability requirements and system-level failure rate budgets.