RLR07C1003GSRSL Equivalent & Substitute Parts

Part Overview

The RLR07C1003GSRSL is a 100 kOhms ±2% 0.25W through-hole resistor manufactured by Vishay Dale, designed for military applications per MIL-PRF-39017/01 specification. This metal film axial resistor features moisture resistance and weldability characteristics suitable for demanding environments. The part is currently active in production with 967 units in stock. Substitute parts are identified when packaging format differs while maintaining identical electrical and mechanical specifications.

Substiute Parts

RLR07C1003GSRSL

Vishay DaleIn Stock: 1013RLR07C1003GSRSL Datasheet

Current PartRFQ

RLR07C1003GSRE6

Vishay DaleIn Stock: 1827RLR07C1003GSRE6 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

The RLR07C1003GSRSL and its identified substitute maintain identical electrical performance and mechanical dimensions. Substitution is determined by the following critical parameters:

• Resistance value: 100 kOhms
• Tolerance: ±2%
• Power rating: 0.25W
• Composition: Metal Film
• Temperature coefficient: ±100ppm/°C
• Operating temperature range: -65°C to 150°C
• Package case: Axial
• Physical dimensions: 0.090" Dia x 0.250" L
• Military series compliance: MIL-PRF-39017/01, RLR07

The substitute part differs only in packaging format (Cut Tape versus Tape & Reel), which does not affect electrical or mechanical compatibility in circuit applications.

Parameter Comparison

Engineering Selection Recommendations

Both the RLR07C1003GSRSL and RLR07C1003GSRE6 are active production parts from Vishay Dale with identical electrical and mechanical specifications. Selection between these parts is determined by procurement and assembly requirements:

• RLR07C1003GSRSL (Tape & Reel packaging) is suitable for high-volume automated assembly operations
• RLR07C1003GSRE6 (Cut Tape packaging) is suitable for lower-volume applications or manual assembly processes

Both parts maintain MIL-PRF-39017/01 military specification compliance, identical failure rate classification, and equivalent regulatory status (RoHS non-compliant, REACH Affected, EAR99 classification). Circuit performance and reliability characteristics are identical between the two part numbers.

Frequently Asked Questions (FAQ)

Q: Can RLR07C1003GSRE6 be used as a direct replacement for RLR07C1003GSRSL in circuit applications?

A: Yes. Both parts have identical electrical specifications (100 kOhms ±2%, 0.25W, ±100ppm/°C) and mechanical dimensions (0.090" Dia x 0.250" L). The only difference is packaging format (Cut Tape versus Tape & Reel), which does not affect circuit performance or reliability.

Q: What is the difference between Tape & Reel and Cut Tape packaging?

A: Tape & Reel (TR) packaging is used for automated pick-and-place assembly systems in high-volume production. Cut Tape (CT) packaging provides individual component strips suitable for manual assembly or lower-volume applications. Both formats contain identical components.

Q: Are both parts compliant with military specifications?

A: Yes. Both RLR07C1003GSRSL and RLR07C1003GSRE6 comply with MIL-PRF-39017/01 military specification and are classified as RLR07 series military resistors with S-level failure rate (0.001%).

Q: What are the regulatory compliance differences between these parts?

A: Both parts share identical regulatory status: RoHS non-compliant, REACH Affected, and EAR99 export classification. No compliance differences exist between the two part numbers.

Q: Which part should be selected for new designs?

A: Selection depends on manufacturing process requirements. For automated assembly, use RLR07C1003GSRSL (Tape & Reel). For manual assembly or lower-volume production, use RLR07C1003GSRE6 (Cut Tape). Both are active production parts with equivalent availability and performance.