RLR07C1002GSRSL Equivalent & Substitute Parts

Part Overview

The RLR07C1002GSRSL is a 10 kOhms ±2% 0.25W axial through-hole resistor manufactured by Vishay Dale. This military-grade metal film resistor features moisture resistance and weldability, meeting MIL-PRF-39017/01 specifications. The part is currently active and available in Tape & Reel packaging with 833 pieces in stock. Substitute parts are identified to address packaging availability, inventory levels, and supply chain flexibility while maintaining identical electrical and mechanical performance.

Substiute Parts

RLR07C1002GSRSL

Vishay DaleIn Stock: 922RLR07C1002GSRSL Datasheet

Current PartRFQ

RLR07C1002GSRE5

Vishay DaleIn Stock: 1547RLR07C1002GSRE5 Datasheet

Parametric EquivalentRFQ

RLR07C1002GSRE6

Vishay DaleIn Stock: 8118RLR07C1002GSRE6 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the RLR07C1002GSRSL are identified based on strict electrical and mechanical parameter matching. The following criteria determine substitution eligibility:

• Resistance value: 10 kOhms (exact match required)
• Tolerance: ±2% (exact match required)
• Power rating: 0.25W (exact match required)
• Composition: Metal Film (exact match required)
• Temperature coefficient: ±100ppm/°C (exact match required)
• Operating temperature range: -65°C to 150°C (exact match required)
• Package type: Axial (exact match required)
• Physical dimensions: 0.090" Dia x 0.250" L (exact match required)
• Series compliance: MIL-PRF-39017/01, RLR07 (exact match required)

The identified substitutes differ only in packaging format (Tape & Reel versus Cut Tape), which does not affect electrical performance or mechanical compatibility in circuit applications.

Parameter Comparison

Engineering Selection Recommendations

All three parts—RLR07C1002GSRSL, RLR07C1002GSRE5, and RLR07C1002GSRE6—are active products with identical electrical specifications and military-grade performance characteristics. Selection between these parts should be based on packaging requirements and inventory availability:

• RLR07C1002GSRSL: Tape & Reel packaging, 833 units in stock
• RLR07C1002GSRE5: Cut Tape packaging, 1518 units in stock
• RLR07C1002GSRE6: Cut Tape packaging, 8073 units in stock

All parts maintain RoHS non-compliant and REACH Affected status. Compliance requirements and regulatory obligations remain consistent across all substitutes. Selection of any substitute does not alter circuit performance, reliability, or military specification compliance.

Frequently Asked Questions (FAQ)

Q: Can RLR07C1002GSRE5 or RLR07C1002GSRE6 be used as direct replacements for RLR07C1002GSRSL?

A: Yes. Both parts are parametric equivalents with identical electrical and mechanical specifications. The only difference is packaging format (Cut Tape versus Tape & Reel), which does not affect circuit performance or component compatibility.

Q: What is the difference between Tape & Reel and Cut Tape packaging?

A: Tape & Reel packaging supplies components on continuous tape wound on reels, suitable for automated assembly. Cut Tape packaging supplies components on tape segments, suitable for manual assembly or smaller production runs. Both formats contain identical components with no electrical or mechanical differences.

Q: Are all three parts suitable for military applications?

A: Yes. All three parts comply with MIL-PRF-39017/01 specifications and carry the military-grade RLR07 series designation. Military compliance and performance characteristics are identical across all substitutes.

Q: Do packaging differences affect component reliability or failure rate?

A: No. Failure rate remains S (0.001%) regardless of packaging format. Packaging affects only handling and assembly logistics, not component performance or reliability.

Q: Which substitute should be selected for highest inventory availability?

A: RLR07C1002GSRE6 offers the highest inventory level at 8073 units in stock, compared to 1518 units for RLR07C1002GSRE5 and 833 units for RLR07C1002GSRSL.