RLR07C1002FSK36 Equivalent & Substitute Parts

Part Overview

The RLR07C1002FSK36 is a 10 kOhms ±1% 0.25W axial through-hole resistor manufactured by Vishay Dale. This military-grade metal film resistor features moisture resistance and weldability, meeting MIL-PRF-39017/01 specifications. The part is currently active and available in Tape & Reel packaging with 1103 units in stock. Substitute parts are identified to address packaging format availability and inventory requirements while maintaining identical electrical and mechanical specifications.

Substiute Parts

RLR07C1002FSK36

Vishay DaleIn Stock: 1156RLR07C1002FSK36 Datasheet

Current PartRFQ

RLR07C1002FSRE5

Vishay DaleIn Stock: 913RLR07C1002FSRE5 Datasheet

Parametric EquivalentRFQ

RLR07C1002FSRE6

Vishay DaleIn Stock: 5427RLR07C1002FSRE6 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the RLR07C1002FSK36 are identified based on electrical and mechanical parameter equivalence. The primary differentiator among the identified substitutes is packaging format. All substitute parts maintain identical electrical specifications: 10 kOhms resistance, ±1% tolerance, 0.25W power rating, metal film composition, ±100ppm/°C temperature coefficient, and -65°C to 150°C operating temperature range. All parts conform to the same military series designation (MIL-PRF-39017/01, RLR07) and share identical physical dimensions (0.090" Dia x 0.250" L). The substitution logic is based on these matching parameters, with packaging format (Tape & Reel versus Cut Tape) representing the only variation among equivalent parts.

Parameter Comparison

Engineering Selection Recommendations

All three parts—RLR07C1002FSK36, RLR07C1002FSRE5, and RLR07C1002FSRE6—are electrically and mechanically equivalent and maintain active product status. Selection among these parts should be based on packaging format requirements and inventory availability. The RLR07C1002FSK36 is supplied in Tape & Reel format, suitable for automated assembly processes. The RLR07C1002FSRE5 and RLR07C1002FSRE6 are supplied in Cut Tape format, appropriate for manual assembly or lower-volume applications. All parts comply with identical military specifications, RoHS non-compliance status, REACH affected designation, and ECCN EAR99 classification. Component selection should prioritize packaging compatibility with assembly equipment and procurement lead times based on current inventory levels.

Frequently Asked Questions (FAQ)

Q: Can RLR07C1002FSRE5 or RLR07C1002FSRE6 be used as direct replacements for RLR07C1002FSK36?

A: Yes. Both parts are parametric equivalents with identical electrical specifications (10 kOhms, ±1%, 0.25W, metal film, ±100ppm/°C, -65°C to 150°C operating range) and mechanical dimensions (0.090" Dia x 0.250" L). The only difference is packaging format: Tape & Reel versus Cut Tape. Substitution is valid provided the receiving assembly process accommodates the different packaging format.

Q: What is the difference between Tape & Reel and Cut Tape packaging?

A: Tape & Reel packaging supplies components on continuous carrier tape wound on reels, optimized for automated pick-and-place assembly equipment. Cut Tape packaging supplies the same components on shorter tape segments, suitable for manual assembly, small-batch production, or applications where reel quantities exceed requirements.

Q: Are all three parts compliant with the same military specifications?

A: Yes. All three parts conform to MIL-PRF-39017/01 and are designated as RLR07 series military-grade resistors. All share identical failure rate classification (S, 0.001%), temperature coefficient (±100ppm/°C), and operating temperature range (-65°C to 150°C).

Q: Which substitute part has the highest inventory availability?

A: RLR07C1002FSRE6 has the highest inventory with 5387 units in stock, compared to 1103 units for RLR07C1002FSK36 and 894 units for RLR07C1002FSRE5.

Q: Do these parts have different RoHS or REACH compliance status?

A: No. All three parts share identical compliance designations: RoHS non-compliant and REACH affected. ECCN classification is EAR99 for all parts.