RLR07C1001GSRSL Equivalent & Substitute Parts

Part Overview

The RLR07C1001GSRSL is a 1 kOhms ±2% 0.25W through-hole resistor manufactured by Vishay Dale, designed for military applications per MIL-PRF-39017/01 specification. This metal film axial resistor features moisture resistance and weldability characteristics suitable for demanding environments. The part is currently active in production with 959 units in stock. Substitute parts are identified when packaging format differs while maintaining identical electrical and mechanical specifications.

Substiute Parts

RLR07C1001GSRSL

Vishay DaleIn Stock: 991RLR07C1001GSRSL Datasheet

Current PartRFQ

RLR07C1001GSRE6

Vishay DaleIn Stock: 3579RLR07C1001GSRE6 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution for the RLR07C1001GSRSL is determined by equivalence across the following critical parameters:

• Resistance value: 1 kOhms
• Tolerance: ±2%
• Power rating: 0.25W
• Composition: Metal Film
• Temperature coefficient: ±100ppm/°C
• Operating temperature range: -65°C ~ 150°C
• Physical dimensions: 0.090" Dia x 0.250" L
• Military series compliance: MIL-PRF-39017/01, RLR07
• Failure rate classification: S (0.001%)

The RLR07C1001GSRE6 qualifies as a parametric equivalent substitute. The only difference between these parts is the packaging format: the main part is supplied in Tape & Reel (TR) configuration, while the substitute is supplied in Cut Tape (CT) configuration. Both parts share identical electrical specifications, physical dimensions, and military qualification status.

Parameter Comparison

Engineering Selection Recommendations

Both the RLR07C1001GSRSL and RLR07C1001GSRE6 are active production parts from Vishay Dale with identical electrical and mechanical specifications. Selection between these parts depends on procurement and assembly requirements:

The RLR07C1001GSRSL in Tape & Reel packaging is suitable for high-volume automated assembly operations where continuous reel feeding is required.

The RLR07C1001GSRE6 in Cut Tape packaging is suitable for lower-volume applications, manual assembly, or situations where individual component handling is preferred.

Both parts maintain full compliance with MIL-PRF-39017/01 military specifications and carry identical failure rate classifications. Neither part is RoHS compliant; both are REACH Affected. Selection should be based on assembly process compatibility and inventory management requirements rather than electrical performance considerations.

Frequently Asked Questions (FAQ)

Q: Can RLR07C1001GSRE6 be used as a direct replacement for RLR07C1001GSRSL?

A: Yes. Both parts are electrically and mechanically identical. The only difference is packaging format (Cut Tape versus Tape & Reel). Direct substitution is valid for any application where the component specifications are the determining factor.

Q: What is the difference between Tape & Reel and Cut Tape packaging?

A: Tape & Reel (TR) packaging supplies components on a continuous reel suitable for automated pick-and-place assembly equipment. Cut Tape (CT) packaging supplies components on tape segments, typically in quantities of 10 or more pieces per strip, suitable for manual assembly or lower-volume production.

Q: Are there any electrical performance differences between these substitute parts?

A: No. Both parts share identical resistance values, tolerance, power rating, temperature coefficient, and operating temperature range. Electrical performance is equivalent.

Q: Do both parts meet military specifications?

A: Yes. Both RLR07C1001GSRSL and RLR07C1001GSRE6 are qualified to MIL-PRF-39017/01 and carry the same failure rate classification of S (0.001%).

Q: What compliance certifications apply to these parts?

A: Both parts are RoHS non-compliant and REACH Affected. Neither part qualifies for RoHS compliance. Both are subject to REACH regulatory requirements.

Q: Which packaging format should I select for my application?

A: Selection depends on your assembly process. Use Tape & Reel for automated high-volume assembly. Use Cut Tape for manual assembly, prototyping, or lower-volume production runs.