RLR07C1001GSRE823 Equivalent & Substitute Parts

Part Overview

The RLR07C1001GSRE823 is a 1 kOhms ±2% 0.25W axial through-hole resistor manufactured by Vishay Dale. This military-grade metal film resistor features moisture resistance and weldability, meeting MIL-PRF-39017/01 specifications. The component is currently in active production status with 1053 pieces available in stock. Substitute parts are identified when packaging format differs while maintaining identical electrical and mechanical specifications, enabling procurement flexibility and supply chain optimization.

Substiute Parts

RLR07C1001GSRE823

Vishay DaleIn Stock: 1160RLR07C1001GSRE823 Datasheet

Current PartRFQ

RLR07C1001GSRE6

Vishay DaleIn Stock: 3579RLR07C1001GSRE6 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of RLR07C1001GSRE823 is determined by equivalence in the following critical parameters: resistance value (1 kOhms), tolerance (±2%), power rating (0.25W), composition (metal film), temperature coefficient (±100ppm/°C), operating temperature range (-65°C to 150°C), axial package configuration, physical dimensions (0.090" Dia x 0.250" L), military series classification (MIL-PRF-39017/01), and failure rate specification (S grade). The primary variable among equivalent parts is packaging format: Tape & Reel (TR) versus Cut Tape (CT). Both packaging formats deliver identical electrical performance and mechanical compatibility in circuit applications.

Parameter Comparison

Engineering Selection Recommendations

Both RLR07C1001GSRE823 and RLR07C1001GSRE6 are active production components from Vishay Dale with identical electrical specifications and military-grade certifications. Selection between these parts depends on procurement and assembly requirements. The Tape & Reel (TR) format of RLR07C1001GSRE823 is suitable for automated pick-and-place assembly operations. The Cut Tape (CT) format of RLR07C1001GSRE6 accommodates manual assembly or lower-volume production runs. Both parts maintain RoHS non-compliant and REACH Affected status. Inventory availability shows 3474 pieces of RLR07C1001GSRE6 in stock compared to 1053 pieces of RLR07C1001GSRE823, which may influence procurement decisions based on lead time requirements.

Frequently Asked Questions (FAQ)

Q: Can RLR07C1001GSRE6 replace RLR07C1001GSRE823 in circuit applications?

A: Yes. Both parts are electrically and mechanically identical, differing only in packaging format (Cut Tape versus Tape & Reel). Circuit performance, reliability, and environmental specifications are equivalent.

Q: What is the difference between Tape & Reel and Cut Tape packaging?

A: Tape & Reel (TR) packaging supplies components on continuous carrier tape wound on reels, optimized for automated assembly equipment. Cut Tape (CT) packaging provides components on tape segments, suitable for manual assembly or lower-volume applications. Both formats contain identical components.

Q: Are there any compliance differences between these substitute parts?

A: No. Both RLR07C1001GSRE823 and RLR07C1001GSRE6 share identical RoHS non-compliant and REACH Affected status. Military series classification (MIL-PRF-39017/01) and failure rate specifications (S grade) are equivalent.

Q: Which part should be selected for automated assembly?

A: RLR07C1001GSRE823 in Tape & Reel format is designed for automated pick-and-place assembly systems. RLR07C1001GSRE6 in Cut Tape format is suitable for manual assembly or lower-volume production environments.

Q: Are the physical dimensions identical?

A: Yes. Both parts have identical axial package dimensions of 0.090" diameter by 0.250" length (2.29mm x 6.35mm), ensuring mechanical compatibility in PCB layouts and through-hole mounting applications.