RLR07C1001GSRE723 Equivalent & Substitute Parts

Part Overview

The RLR07C1001GSRE723 is a 1 kOhms ±2% 0.25W axial through-hole resistor manufactured by Vishay Dale. This military-grade metal film resistor features moisture resistance and weldability, meeting MIL-PRF-39017/01 specifications. The component is currently active in production with 879 pieces in stock. Substitute parts are identified when packaging format differs while all critical electrical and mechanical parameters remain identical.

Substiute Parts

RLR07C1001GSRE723

Vishay DaleIn Stock: 949RLR07C1001GSRE723 Datasheet

Current PartRFQ

RLR07C1001GSRE6

Vishay DaleIn Stock: 3579RLR07C1001GSRE6 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

The RLR07C1001GSRE723 and its substitute RLR07C1001GSRE6 are functionally equivalent based on the following criteria:

Identical Electrical Parameters:

• Resistance value: 1 kOhms
• Tolerance: ±2%
• Power rating: 0.25W
• Temperature coefficient: ±100ppm/°C
• Operating temperature range: -65°C ~ 150°C

Identical Mechanical Parameters:

• Composition: Metal Film
• Package case: Axial
• Physical dimensions: 0.090" Dia x 0.250" L
• Number of terminations: 2

Identical Compliance & Certification:

• Military series: MIL-PRF-39017/01, RLR07
• Failure rate: S (0.001%)
• Features: Military, Moisture Resistant, Weldable

Substitution Basis: The only difference between these parts is the packaging format. RLR07C1001GSRE723 is supplied in Tape & Reel (TR) format, while RLR07C1001GSRE6 is supplied in Cut Tape (CT) format. Both formats contain identical components with no variation in electrical performance or physical specifications.

Parameter Comparison

Engineering Selection Recommendations

Both RLR07C1001GSRE723 and RLR07C1001GSRE6 are active production components from Vishay Dale meeting identical military specifications. Selection between these parts should be based on packaging requirements:

RLR07C1001GSRE723 (Tape & Reel): Use when automated assembly equipment requires continuous reel feeding or when bulk quantities are needed with integrated tape packaging.

RLR07C1001GSRE6 (Cut Tape): Use when smaller quantities are required, manual assembly is performed, or when cut tape format is preferred for component handling and storage.

Both parts maintain identical electrical performance, mechanical compatibility, and compliance status. The choice between them is determined by procurement and assembly process requirements, not by component performance or reliability characteristics.

Frequently Asked Questions (FAQ)

Q: Can RLR07C1001GSRE6 be used as a direct replacement for RLR07C1001GSRE723?

A: Yes. Both parts are electrically and mechanically identical. The only difference is packaging format (Tape & Reel versus Cut Tape). Direct substitution is valid for any application where the packaging format is compatible with your assembly process.

Q: Are there any performance differences between Tape & Reel and Cut Tape versions?

A: No. The resistor components themselves are identical. Tape & Reel and Cut Tape are distribution formats only and do not affect electrical characteristics, tolerance, temperature coefficient, or reliability ratings.

Q: What does the failure rate "S (0.001%)" mean?

A: This indicates the military failure rate classification per MIL-PRF-39017/01. Both parts carry the same S-level failure rate of 0.001% per 1000 hours of operation.

Q: Can these parts be used interchangeably in military applications?

A: Yes. Both parts meet MIL-PRF-39017/01 specifications and carry identical military certifications, features (moisture resistant, weldable), and compliance status. They are fully interchangeable for military applications.

Q: Which part should I order if I need components immediately?

A: RLR07C1001GSRE6 has higher inventory availability (3474 pieces) compared to RLR07C1001GSRE723 (879 pieces). If lead time is critical and your assembly process supports Cut Tape format, RLR07C1001GSRE6 may provide faster delivery.