RLR07C1001GSRE5 Equivalent & Substitute Parts

Part Overview

The RLR07C1001GSRE5 is a 1 kOhms ±2% 0.25W through-hole resistor manufactured by Vishay Dale, designed for military applications per MIL-PRF-39017/01 specification. This metal film axial resistor features moisture resistance and weldability, making it suitable for demanding environments requiring high reliability. The part is currently active in production with 979 units in stock. Substitute parts are identified when packaging format changes or inventory constraints necessitate alternative sourcing while maintaining identical electrical and mechanical performance.

Substiute Parts

RLR07C1001GSRE5

Vishay DaleIn Stock: 992RLR07C1001GSRE5 Datasheet

Current PartRFQ

RLR07C1001GSRE6

Vishay DaleIn Stock: 3579RLR07C1001GSRE6 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of RLR07C1001GSRE5 is determined by strict equivalence across all electrical parameters and mechanical dimensions. The primary differentiator between the main part and its substitute is packaging format: the main part is supplied in Tape & Reel (TR) configuration, while the substitute is available in Cut Tape (CT) configuration. Both parts maintain identical electrical specifications including resistance value, tolerance, power rating, temperature coefficient, and operating temperature range. The axial package type, physical dimensions, and military series designation remain constant. Substitution is valid only when the packaging format change does not conflict with assembly process requirements or procurement specifications.

Parameter Comparison

Engineering Selection Recommendations

Both RLR07C1001GSRE5 and RLR07C1001GSRE6 are active production parts from Vishay Dale meeting MIL-PRF-39017/01 military specifications. Selection between these parts should be based on assembly process compatibility with packaging format. The Tape & Reel format (RLR07C1001GSRE5) is optimized for automated pick-and-place assembly systems, while Cut Tape format (RLR07C1001GSRE6) is suitable for manual assembly or lower-volume production runs. Both parts carry identical electrical performance, military-grade reliability ratings, and compliance status. Inventory availability may influence selection when production schedules require expedited sourcing.

Frequently Asked Questions (FAQ)

Q: Can RLR07C1001GSRE6 be used as a direct replacement for RLR07C1001GSRE5?

A: Yes, provided the assembly process accommodates Cut Tape packaging. All electrical parameters, mechanical dimensions, and performance specifications are identical between the two parts.

Q: What is the difference between Tape & Reel and Cut Tape packaging?

A: Tape & Reel (TR) packaging supplies components on continuous carrier tape wound on reels, optimized for automated assembly equipment. Cut Tape (CT) packaging provides components on tape segments cut to specific lengths, suitable for manual assembly or lower-volume applications.

Q: Are there any performance differences between these substitute parts?

A: No. Both parts are manufactured to identical specifications with the same resistance value, tolerance, power rating, temperature coefficient, and operating temperature range. The only difference is the packaging format.

Q: Do both parts meet military specifications?

A: Yes. Both RLR07C1001GSRE5 and RLR07C1001GSRE6 comply with MIL-PRF-39017/01 military standards and carry the same failure rate classification of S (0.001%).

Q: Which part should be selected for high-volume automated assembly?

A: RLR07C1001GSRE5 in Tape & Reel format is the standard choice for automated pick-and-place assembly systems due to its continuous reel configuration.

Q: Can packaging format be changed mid-production?

A: Packaging format changes should be evaluated against assembly process specifications and procurement requirements. Consult manufacturing and supply chain documentation before implementing format changes in active production.